Akurate ExaktBox
Contents
Getting Started
Product info
- Product Name:
- Akurate ExaktBox (10-channel)
- Akurate ExaktBox ( 6-channel)
- Date of Introduction:
- September 2014 (10-channel)
- September 2015 ( 6-channel)
- Type: Digital Crossover with Exakt Technology
- Supports
- Stereo speakers from 2way to 3way (6-channel) or 2-way to 5-way (10-channel) or
- Mono speakers from 2way to 6way (6 & 10 channel)
- Software upgradable to support more and more loudspeakers
- Connects to power amplifiers and externally Aktiv speakers
- Supports
- Can only be used with Exakt-Link output products
- Features
Support
Installation
As this is an Exaktbox the initial setup must be performed with a Local Area Network that has Internet access. Otherwise Konfig cannot set the speaker channel, Speaker profile and Space Optimisation of these products
Latest software
Manuals
FAQ's
Check FAQ-AkurateBox DSM
Back Panel Connections
- MAINS INPUT - To connect to the mains electricity supply.
- EXAKT LINK- To connect to Exakt compatible devices (CAT-5 cables)
- ANALOGUE OUTPUTS (XLR,variable level) - To connect to power amplifiers with balanced (XLR) analogue inputs. (300ohm Output impedance)
- ANALOGUE OUTPUTS (RCA, variable level) - To connect to power amplifier with unbalanced (RCA) analogue inputs. (300ohm Output impedance)
- FALLBACK - Primarily for Linn service use only, to put the device into Fallback mode (used when reprogramming the unit).
Note: Both XLR and RCA outputs are active simulatneously.
EXAKT LINK Connections
Example if you are using a Akurate DSM/1 to connect to an Akurate ExaktBox:
The Exakt-link cable can supply digital audio for multiple speakers.
Use Konfig > Exakt Setup pages to declare if Channel1 is left or right hand channel and Channel2 is left or right hand channel
Check HERE for more information of Exakt link connection
Power Amplifier/Speaker connections
DOUBLE CHECK the wiring from the Exaktbox to power amplifier to speaker terminals!
If there are any mis-wires or wrong speaker definintions in the Exaktbox, you may blow the speaker drive units, so take care.
If this is the first connection use the standard Aktiv test scenario.
- Switch off ALL power amplifiers.
- Disconnect any power amplifier to speakers connections
- Set to a low volume value, e.g 40-50
- Do the following tests 5,6,7,8 starting with the Bass connections, then Midrange, then tweeter and finally super tweeter in that order.
- Connect respective (Bass or Mid or tweeter ot super-tweeter) power amplifier connection to the Bass connection (Bass or Mid or tweeter ot super-tweeter) of the speaker.
- Switch on the respective amplifier and play some Music. Check that you are only getting (Bass or Mid or tweeter ot super-tweeter) audio from that speaker drive unit.
- Stop the Music playing.
- Leave this cable connected go to Step4 and connect the next speaker drive unit in the list.
If you change speaker or variant, this may also change the Exaktbox terminations so DOUBLE CHECK
To see the Exaktbox terminations for each speaker click here
EXAKT LED Status
LED |
OFF |
ON |
Flash / Blink |
0 Master Port | No Link | Link Discovered | Link Activity |
1 Audio Clock | No Clock | Clock locked | Clock not locked |
2 Slave Port | No Link | Link Enabled | Link Activity |
3 Software Status | Not Configured | Running | Hardware Fault |
Installation
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
- The ExaktBox is shipped from Linn with no speaker setup and must be configured with Konfig software.
Exakt options
Exakt usage can be found in Klimax_Exakt_System
One of the beneifts of the Exakt system is that you can easily setup and optimise your listening environment. Simply download the latest version of Konfig (version 4.11.7 or higher) and follow the Space_Optimsation+ & Space Optimisation+ (Advanced)
Supported speakers
When used in this mode any spare outputs CANNOT be used for the either 6 or 8 channel passthrough Surround mode
Select CONNECTION HELP for up to date wiring information
Check www.Linn.co.uk Exakt speakers
Examples using Akurate Exaktbox
Note: It should be noted that information may at times be out of date and should not be used as a current list of what is supported. check www.Linn.co.uk
These speakers must be made externally Aktiv
Note: Speakers that cannot be made externally Aktiv e.g Av5110, UNIK, Diskreet etc cannot be used with the Exaktbox
- Klimax / Artikulat 350(Externally Aktiv 350's will need to be converted for use with the Exaktbox operation)
- Komri
- Keltik
- Standard production mid-range 007 & tweeter 015
- Mid-range 081 & tweeter 038 were used for repair or upgrade
- Akubarik passive made Aktiv
- Akudorik passive speakers made Aktiv
- Akurate 242 Mk1 & Mk2
- Akurate 212 Mk1 & Mk2
- Akurate 225 - Centre - Akurate Exaktbox6
- Majik Isobarik
- Majik 140
- Majik 112 - Akurate Exaktbox6
- Majik 109
- Komponent 104
- Komponent 106
- Komponent 110
- Ninka speakers- bi-amped or Tri-amped
- Keilidh- Bi-Amped & Tri-Amped (t1-Tweeter 15, T2-Tweeter 038)
- AV5140
- Standard production tweeter 015, Tweeter 038 were used for repair or upgrade
- AV5120-Centre - Akurate Exaktbox6
- Espek
- Ekwal-Centre - Akurate Exaktbox6
- Kaber
- Katan
- Trikan - Centre - Akurate Exaktbox6
- (original) Isobarik
- Sekrit IW10
Unused Channels CANNOT be used for another loudspeaker or purpose.
non-Linn speakers
Examples using Akurate Exaktbox
Note: It should be noted that information may at times be out of date and should not be used as a current list of what is supported. check www.Linn.co.uk
- B&W Nautilus
- B&W 802 Diamond
- KUDOS Super10
- KUDOS Super20
- KUDOS Titan 707
- KUDOS Titan 808
- JBL K2 S9900
- Twenty.26
- KEF Reference 3
- KEF Reference 5
Example of use
ExaktBox Surround Channel selection
E.g. But NOT a LFE AND MONO on the same Exaktbox |
above is an Exaktbox configured for "6 channel passthrough" |
Trouble shooting
Check Exakt trouble shooting
For further assistance, try our customer support pages.