Difference between revisions of "Akubarik"
(→Fine Adjustments) |
|||
| Line 127: | Line 127: | ||
'''*''' - Individually tuned at factory to match specific 3K Array | '''*''' - Individually tuned at factory to match specific 3K Array | ||
| − | NB:- Invalid settings will mute the entire speaker and light Blue and Red LEDs together. | + | '''NB:-''' Invalid settings will mute the entire speaker and light Blue and Red LEDs together. |
Revision as of 13:27, 17 April 2013
Contents
Product info
- Product Name: AKUBARIK
- Date of Introduction: April 2013
- Type: Integrated Aktiv Isobarik Loudspeaker
- Features
Support
Manuals
Back Panel Connections
- MAINS INPUT - To connect to the mains electricity supply.
- BALANCED IN - To connect sources with balanced (XLR) outputs*.
Installation
We recommend that your Akubarik loudspeakers are unpacked, installed and adjusted by an authorised Linn retailer. To get the best from your Akubarik loudspeakers, it is important that they are positioned and levelled correctly.
Please note, in order to achieve the very best from your Akubarik, some adjustment may be required after positioning, levelling and connecting. See the Fine adjustment section.
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
For further assistance, try our customer support pages or the Linn Forum.
Fine Adjustments
Once your Akubariks are correctly positioned, levelled and connected, some tuning of the sound may benefit the performance. The acoustics of a room are dependent on many factors including size, shape, contents and textures. The information below will assist in helping you to achieve optimum sound from your loudspeakers in any setting.
The Akubariks are provided with two adjustment switches on the back panel. The factory settings will provide the best performance in the majority of room settings, however if a room's acoustics are found to be a little bright or perhaps a bit bass-heavy, these switches allow certain parameters to be fine-tuned, in order to allow the loudspeaker performance to match the room acoustics more closely.
| Switch | Function | Available Settings | Factory Default Setting | |
| Roll-On | Set frequency of high pass filter | 20Hz, 40Hz, 60Hz | 20Hz | |
| Bass Cut | Reduce Bass level | 0dB to -7dB (1dB steps) | 0dB | |
| Mid | Adjust gain of Midrange | -1.5dB to +2dB (in 0.5dB steps) | * | |
| Tweeter | Adjust gain of Tweeter | -1.5dB to +2dB (in 0.5dB steps) | * | |
| Super Tweeter | Adjust gain of Super Tweeter | -1.5dB to +2dB (in 0.5dB steps) | * |
|
* - Individually tuned at factory to match specific 3K Array
NB:- Invalid settings will mute the entire speaker and light Blue and Red LEDs together.
