Difference between revisions of "Template:Setup:Selekt Edition Sub"
m |
m |
||
| Line 1: | Line 1: | ||
<!-- Selekt DSM SubOut configuration---> | <!-- Selekt DSM SubOut configuration---> | ||
<font style="color:red; font-weight:bold">This will ONLY work in <u>Stereo</u> configurations. This cannot be used in Surround Playback.</font> | <font style="color:red; font-weight:bold">This will ONLY work in <u>Stereo</u> configurations. This cannot be used in Surround Playback.</font> | ||
| − | :These outputs are to give <b>Stereo</b> music enhancement on the Selekt DSM Edition. | + | :These outputs are to give <b>Stereo</b> music enhancement on the Selekt DSM Edition using the Selekt cartidges for L+R feed.. |
::Examples | ::Examples | ||
Revision as of 06:55, 5 July 2023
This will ONLY work in Stereo configurations. This cannot be used in Surround Playback.
- These outputs are to give Stereo music enhancement on the Selekt DSM Edition using the Selekt cartidges for L+R feed..
- Examples
- 
- In Konfig - subwoofer options
| Filter | |||
| ON | SUBOUT set by crossover frequency 60Hz, 80Hz, 120Hz . | ||
| Disable | SUBOUT crossover frequency 1kHz, the LHC/RHC audio is flat. |
| Crossover frequency |
| 60: | Crossover frequency 60Hz | ||
| 80 | Crossover frequency 80Hz | ||
| 120 | Crossover frequency 120Hz |
| Type | In both case below, the audio below the crossover frequency is sent to the sub outs, | ||
| Bass redirect: | Audio above that frequency is sent to the cartridge and Exakt speakers | ||
| Bass Reinforcement | Audio to the cartdiges and Exakt speakers is flat. |
- In both case below, the audio below the crossover frequency is sent to the sub outs
| Channels | , | ||
| Mono: | Mono for a single Subwoofer | ||
| Stereo | For two Subwoofers |
- Notes
-
- Only works with Stereo playback
- Does NOT work with DSD playback
