Template:Info:Exakt-Cables

ALL FOUR pairs of the cables are used in the Exakt-Link cable. This is NOT an ethernet transport cable but an Exakt transport cable. These pairs are used to transmit the audio data, power triggers and a master timing control to ensure that the audio from all channels are in perfect sync.

The Exakt-link has been designed to operate with the CAT-5 cable electrical specifications for signal timings. There have been NO changes to this design for any other CAT cable standards. (updated 2019)

We recommend using the 100Base-T4 / 568B ethernet cable pairing

Exakt Link uses readily available network cables:

• CAT 5 UTP/FTP
• CAT 6 UTP/FTP

Note: There is no change in the audio performance of the Exakt Link between Cat 5 or Cat 6 Cables.

CAT 7 and CAT 8 cable electrical specifications do NOT work well with the EXAKT-LINK transport. These cables will limit the Exakt cable length usable length.
We advise this cable is not used and replaced with CAT-5/6 in Exakt-Link installations. 

Typical Ethernet 100Base-T length restrictions guide:

Patch cable < 30M

Solid core cable < 100M

EXAKT-LINK CANNOT be used with:

• Ethernet Isolators,
• Ethernet conditioners,
• HomePlugs/Ethernet-over-Mains devices
• WLAN bridges etc

Exakt-Link can ONLY be a CAT5/6 cable from Exakt socket to Exakt socket