Difference between revisions of "Kiko DSM information"
(→Manuals) |
m (→Back Panel Connections) |
||
| Line 58: | Line 58: | ||
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming). | # '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming). | ||
# '''ETHERNET''' - To connect to a network. | # '''ETHERNET''' - To connect to a network. | ||
| − | # '''HDMI OUTPUT''' - To connect to a display device with HDMI inputs. | + | # '''HDMI OUTPUT''' - To connect to a display device with HDMI 1.4 inputs. |
| − | # '''HDMI INPUTS''' - To connect sources with HDMI outputs. | + | # '''HDMI INPUTS''' - To connect sources with HDMI 1.4 outputs. |
# '''DIGITAL INPUT''' (Toslink) - To connect sources with Toslink (optical) digital outputs. | # '''DIGITAL INPUT''' (Toslink) - To connect sources with Toslink (optical) digital outputs. | ||
# '''DIGITAL INPUT''' (Spdif) - To connect sources with Spdif (RCA) digital outputs. | # '''DIGITAL INPUT''' (Spdif) - To connect sources with Spdif (RCA) digital outputs. | ||
Revision as of 11:52, 11 December 2017
Contents
Getting Started
Product info
- Product Name: Kiko DSM
- Date of Introduction: July 2012
- Type: Integrated digital music player, pre-amplifier and power amplifier
- Features
Support
Latest software
Manuals
Third Party Software Copyright
HDMI Setup
Network Setup
Back Panel Connections
- MAINS INPUT - To connect to the mains electricity supply.
- FALLBACK - To put the device into Fallback mode (used when reprogramming).
- ETHERNET - To connect to a network.
- HDMI OUTPUT - To connect to a display device with HDMI 1.4 inputs.
- HDMI INPUTS - To connect sources with HDMI 1.4 outputs.
- DIGITAL INPUT (Toslink) - To connect sources with Toslink (optical) digital outputs.
- DIGITAL INPUT (Spdif) - To connect sources with Spdif (RCA) digital outputs.
- ANALOGUE INPUT (line level) - To connect a turntable or line level source with unbalanced (RCA) outputs.
- SPEAKER OUTPUTS - To connect to loudspeakers
Front Panel Connections
- HEADPHONE OUTPUT - To connect to stereo headphones with a 3.5mm input
- AUX SOURCE INPUT - To connect to a stereo audio source with a 3.5mm output
- IR SENSOR - Recieves IR commands
- STANDBY LED
- FRONT PANEL DISPLAY
- POWER SWITCH- Switches the power on/off
Installation
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
For further assistance, try our customer support pages or the Linn Forum.
