Difference between revisions of "Klimax DSM (Exakt Variant)"
(→Back Panel Connections) |
(→Back Panel Connections) |
||
| Line 84: | Line 84: | ||
'''<sup>1</sup>''' XLR to RCA adaptors are supplied for connecting sources with unbalanced outputs. Input transformer can be enabled or disabled in [[Konfig_Manual#Input_level.2C_Unity_Gain.2C_Volume_offset | Konfig setup]]<br><br> | '''<sup>1</sup>''' XLR to RCA adaptors are supplied for connecting sources with unbalanced outputs. Input transformer can be enabled or disabled in [[Konfig_Manual#Input_level.2C_Unity_Gain.2C_Volume_offset | Konfig setup]]<br><br> | ||
'''<sup>2</sup>''' Set to DELAY mode > DIRECT to pass through an Analogue volume control to the Analogue out.<br> | '''<sup>2</sup>''' Set to DELAY mode > DIRECT to pass through an Analogue volume control to the Analogue out.<br> | ||
| − | Only use the XLR(8) output OR the RCA(9) output, never use both outputs | + | Only use the XLR(8) output OR the RCA(9) output, never use both outputs as the RCA will degrade the XLR(8) output audio.<br> |
=== [[Exakt_link | '''EXAKT LINK connection''']]=== | === [[Exakt_link | '''EXAKT LINK connection''']]=== | ||
Revision as of 08:36, 18 May 2015
Contents
Getting Started
Product info
- Product Name: Klimax DSM/1
- Date of Introduction:June 2014
- Type: Integrated digital music player and preamplifier
- Product Information sheet
- Features
- DS Design
- Dynamik Power Supply
- 192k/24bit Analogue to Digital convertion for Analogue input
Support
Latest software
Manuals
HDMI Setup
Network Setup
Back Panel Connections
- MAINS INPUT - To connect to the mains electricity supply.
- TOSLINK IN- To connect sources with Toslink (optical) digital outputs.
- ETHERNET - To connect to a network.
- SPDIF IN - To connect sources with Spdif digital outputs.
- EXAKT LINK- To connect to Exakt compatible devices
- EARTH GROUND - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
- BALANCED IN RIGHT, LEFT - To connect sources with balanced (XLR) outputs. 1 2
- BALANCED OUT RIGHT, LEFT - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.2
- UNBALANCED OUT RIGHT, LEFT - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.2
- HDMI OUT - To connect to a display device with HDMI inputs.
- HDMI IN 1, 2, 3 - To connect sources with HDMI outputs.
- FALLBACK - To put the device into Fallback mode (used when reprogramming the unit).
1 XLR to RCA adaptors are supplied for connecting sources with unbalanced outputs. Input transformer can be enabled or disabled in Konfig setup
2 Set to DELAY mode > DIRECT to pass through an Analogue volume control to the Analogue out.
Only use the XLR(8) output OR the RCA(9) output, never use both outputs as the RCA will degrade the XLR(8) output audio.
EXAKT LINK connection
Check HERE for information of Exakt link connection
Klimax DSM/1 differences
Changes to Klimax DSM/1 compared to the Klimax DSM/0
- - 2off Exakt link sockets - To connect speakers/Tuneboxes with Exakt Link. This will allow audio from both the Analogue output and Exakt outputs.
- - 1off SPDIF input - The Klimax DSM/0 has 2off SPDIF inputs
Front Panel
- DISPLAY
- ON / OFF SWITCH
Installation
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
For further assistance, try our customer support pages or the Linn Forum.
Exakt Options
Exakt usage the the Exakt Klimax speakers can be found at Klimax Exakt System
Trouble shooting
Check Exakt trouble shooting
