Difference between revisions of "Klimax DSM"
(→HDMI Pass Through) |
|||
| Line 44: | Line 44: | ||
# '''TOSLINK IN'''- To connect sources with Toslink (optical) digital outputs. | # '''TOSLINK IN'''- To connect sources with Toslink (optical) digital outputs. | ||
# '''ETHERNET''' - To connect to a network. | # '''ETHERNET''' - To connect to a network. | ||
| − | # '''SPDIF IN''' - To connect sources with | + | # '''SPDIF IN''' - To connect sources with Spdif digital outputs. |
# '''BALANCED IN RIGHT, LEFT''' - To connect sources with balanced (XLR) outputs*. | # '''BALANCED IN RIGHT, LEFT''' - To connect sources with balanced (XLR) outputs*. | ||
# '''BALANCED OUT RIGHT, LEFT''' - To connect to a power amplifier with balanced (XLR) inputs. | # '''BALANCED OUT RIGHT, LEFT''' - To connect to a power amplifier with balanced (XLR) inputs. | ||
Revision as of 11:49, 11 October 2011
Contents
Product info
- Product Name: Klimax DSM
- Date of Introduction: October 2011
- Type: Digital Music Player.
- Features
Latest software
Manuals
Network Setup
Back Panel Connections
- MAINS INPUT - To connect to the mains electricity supply.
- FALLBACK - To put the device into Fallback mode (used when reprogramming the unit).
- TOSLINK IN- To connect sources with Toslink (optical) digital outputs.
- ETHERNET - To connect to a network.
- SPDIF IN - To connect sources with Spdif digital outputs.
- BALANCED IN RIGHT, LEFT - To connect sources with balanced (XLR) outputs*.
- BALANCED OUT RIGHT, LEFT - To connect to a power amplifier with balanced (XLR) inputs.
- UNBALANCED OUT RIGHT, LEFT - To connect to a power amplifier with unbalanced (RCA) inputs.
- EARTH GROUND - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
- HDMI IN 1, 2, 3 - To connect sources with HDMI outputs.
- HDMI OUT - To connect to a display device with HDMI inputs.
* XLR to RCA adaptors are supplied for connecting sources with unbalanced outputs.
Front Panel
- DISPLAY
- ON / OFF SWITCH
Installation
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
- Unpacking - Please read the information on unpacking your Klimax DSM.
- Positioning - Please read the information on positioning your Klimax DSM.
For further assistance, try our customer support pages or the Linn Forum.
HDMI Pass Through
HDMI Audio Bypass Mode
During normal HDMI operation, with an HDMI input selected for listening, the DSM will not pass audio to the HDMI output and any attached HDMI downstream devices (example TV). Audio is only passed to the HDMI output when the DSM is in HDMI Audio Bypass Mode. This mode can be activated either by entering sleep/standby mode or by selecting a non HDMI input for listening.
HDMI CEC
During normal HDMI operation, with an HDMI input selected for listening, the DSM will ignore all CEC commands arriving from upstream source devices (BluRay disk players etc). The DSM will respond to CEC source switching commands when HDMI Audio Bypass Mode is active.
