Difference between revisions of "TroubleShooting:Selekt DSM"
m (→Selekt DSM does not produce any sound from the cartridge(s)) |
m (→Selekt DSM does not produce any sound from the cartridge(s)) |
||
| Line 4: | Line 4: | ||
:1. Make sure that your Selekt DSM is powered on and connected to a network with internet access | :1. Make sure that your Selekt DSM is powered on and connected to a network with internet access | ||
:2. In Konfig, select your DSM and go into the {{border|<b>Exakt</b>|width=5px| style2=padding:5px }} or {{border|<b>Speakers</b>|width=5px| style2=padding:5px }} tab | :2. In Konfig, select your DSM and go into the {{border|<b>Exakt</b>|width=5px| style2=padding:5px }} or {{border|<b>Speakers</b>|width=5px| style2=padding:5px }} tab | ||
| − | ::a) In the Speakers configuration box, click on the <span style="color:#FFFFFF;background:#000080;padding:3px"><b> FALLBACK </b></span> button. This will put the Selekt backplane into fallback mode. | + | ::a) In the Speakers configuration box, click on the <span style="color:#FFFFFF;background:#000080;padding:3px"><b> FALLBACK</b></span> button. This will put the Selekt backplane into fallback mode. |
::b) After a few moments, press the <span style="color:#FFFFFF;background:#000080;padding:3px"><b>RESTORE</b></span> button in the Speakers configuration box. | ::b) After a few moments, press the <span style="color:#FFFFFF;background:#000080;padding:3px"><b>RESTORE</b></span> button in the Speakers configuration box. | ||
::c) Let it go through its steps. | ::c) Let it go through its steps. | ||
Revision as of 09:00, 24 October 2022
Selekt DSM issues
Selekt DSM does not produce any sound from the cartridge(s)
- Using Konfig
- 1. Make sure that your Selekt DSM is powered on and connected to a network with internet access
- 2. In Konfig, select your DSM and go into the Exakt or Speakers tab
- a) In the Speakers configuration box, click on the FALLBACK button. This will put the Selekt backplane into fallback mode.
- b) After a few moments, press the RESTORE button in the Speakers configuration box.
- c) Let it go through its steps.
- 3. When it's finished,
- a) power cycle the Selekt.( Do NOT use the Reboot option in Konfig.)
- b) Set up the speaker info and see if normal operation has returned.
- c) If not please contact Linn Helpline.
