Difference between revisions of "TroubleShooting:Selekt DSM"
m (→Selekt DSM does not product any sound/music from the cartridge(s)) |
m (→Selekt DSM issues) |
||
| Line 7: | Line 7: | ||
::b) After a few moment press the <span style="color:#FFFFFF;background:#000080;padding:3px"><b>RESTORE</b></span> button on the Speaker configuration page. | ::b) After a few moment press the <span style="color:#FFFFFF;background:#000080;padding:3px"><b>RESTORE</b></span> button on the Speaker configuration page. | ||
::c) Let it go through its steps. | ::c) Let it go through its steps. | ||
| − | :3. When it's finished, power cycle the Selekt, set up the speaker info and see if normal operation has returned. | + | :3. When it's finished, power cycle the Selekt, set up the speaker info and see if normal operation has returned. If not please contact Linn Helpline |
| − | + | <!-- | |
;If this does not work | ;If this does not work | ||
| Line 17: | Line 17: | ||
:5. Power down the Selekt, | :5. Power down the Selekt, | ||
:6. REFIT any fitted cartridges, | :6. REFIT any fitted cartridges, | ||
| − | :7. Power up and all should now be working. If not please contact Linn Helpline. | + | :7. Power up and all should now be working. If not please contact Linn Helpline. ---> |
Revision as of 07:54, 24 October 2022
Selekt DSM issues
Selekt DSM does not product any sound/music from the cartridge(s)
- Using Konfig
- 1. Make sure that your Selekt DSM is powered on and your LAN network has Ethernet access
- 2. In Konfig, select your DSM and go into the Exakt or Speakers tab
- a) In the Speakers configuration box select the FALLBACK button. This will put the Selekt cartridge backplane into software FALLBACK mode.
- b) After a few moment press the RESTORE button on the Speaker configuration page.
- c) Let it go through its steps.
- 3. When it's finished, power cycle the Selekt, set up the speaker info and see if normal operation has returned. If not please contact Linn Helpline
