Difference between revisions of "TroubleShooting:Selekt DSM"
m (→Selekt DSM does not product any sound/music from the cartridge(s)) |
m (→Selekt DSM does not product any sound/music from the cartridge(s)) |
||
| Line 3: | Line 3: | ||
;Using Konfig | ;Using Konfig | ||
:1. Make sure that your Selekt DSM is powered on and your LAN network has Ethernet access | :1. Make sure that your Selekt DSM is powered on and your LAN network has Ethernet access | ||
| − | :2. In Konfig select | + | :2. In Konfig, select your DSM and go into the {{border|<b>Exakt</b>|width=5px| style2=padding:5px }} or {{border|<b>Speakers</b>|width=5px| style2=padding:5px }} tab |
::a) In the Speakers configuration box select the <span style="color:#FFFFFF;background:#000080;padding:3px"><b> FALLBACK </b></span> button. This will put the Selekt cartridge backplane into software FALLBACK mode. | ::a) In the Speakers configuration box select the <span style="color:#FFFFFF;background:#000080;padding:3px"><b> FALLBACK </b></span> button. This will put the Selekt cartridge backplane into software FALLBACK mode. | ||
::b) After a few moment press the <span style="color:#FFFFFF;background:#000080;padding:3px"><b>RESTORE</b></span> button on the Speaker configuration page. | ::b) After a few moment press the <span style="color:#FFFFFF;background:#000080;padding:3px"><b>RESTORE</b></span> button on the Speaker configuration page. | ||
Revision as of 07:52, 24 October 2022
Selekt DSM issues
Selekt DSM does not product any sound/music from the cartridge(s)
- Using Konfig
- 1. Make sure that your Selekt DSM is powered on and your LAN network has Ethernet access
- 2. In Konfig, select your DSM and go into the Exakt or Speakers tab
- a) In the Speakers configuration box select the FALLBACK button. This will put the Selekt cartridge backplane into software FALLBACK mode.
- b) After a few moment press the RESTORE button on the Speaker configuration page.
- c) Let it go through its steps.
- 3. When it's finished, power cycle the Selekt, set up the speaker info and see if normal operation has returned.
- If this does not work
- 1. Power down the Selekt,
- 2. REMOVE any fitted cartridges,
- 3. Power up the Selekt,
- 4. When booted up go into the Exakt tab in Konfig and click on the RESTORE button. This will reflash the Backplane board software.
- 5. Power down the Selekt,
- 6. REFIT any fitted cartridges,
- 7. Power up and all should now be working. If not please contact Linn Helpline.
