Difference between revisions of "Technical Specification:Majik DSM/4"

From LinnDocs
Jump to: navigation, search
m
m
Line 21: Line 21:
 
|-
 
|-
 
||Power continuous ||  500W
 
||Power continuous ||  500W
 +
|-
 +
|Ethernet || 100Base-T RJ45
 
|-
 
|-
 
|Supported file types ||FLAC, WAV, MP3, AAC, AIFF/AIFC, ALAC, OGG/VORBIS, WMA, DSD (DSF and DFF)
 
|Supported file types ||FLAC, WAV, MP3, AAC, AIFF/AIFC, ALAC, OGG/VORBIS, WMA, DSD (DSF and DFF)
Line 30: Line 32:
 
|Control protocol ||Compatible with UPnP™ media servers, UPnP™ AV 1.0 control points
 
|Control protocol ||Compatible with UPnP™ media servers, UPnP™ AV 1.0 control points
 
|-
 
|-
−
|rowspan = "11"|<b>inputs</b> ||   
+
|rowspan = "9"|<b>inputs</b> ||   
 
1off Ethernet <br>  
 
1off Ethernet <br>  
 
|-  
 
|-  
Line 62: Line 64:
 
::Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
 
::Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
 
|-  
 
|-  
−
||1off SPDIF  (This is disable if this socket is configured as a Output)<br>  
+
||1off SPDIF  (This is disabled if this socket is configured as a Output)<br>  
 
::Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
 
::Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
 
::Nominal input voltage 0.5 V peak
 
::Nominal input voltage 0.5 V peak
Line 70: Line 72:
 
|-  
 
|-  
 
|<b>Sources</b> || LAN <br> Internet radio<br> Tidal<br> Qobuz<br> Calm Radio<br> Spotify Connect <br> NetAux <br> Roon
 
|<b>Sources</b> || LAN <br> Internet radio<br> Tidal<br> Qobuz<br> Calm Radio<br> Spotify Connect <br> NetAux <br> Roon
 +
 +
|-
 +
|rowspan = "3"| ANALOGUE AUDIO OUTPUTS <br> Shares common volume control
 
|-
 
|-
−
|Ethernet || 100Base-T RJ45
+
||1pr Stereo RCA phono socket,
 +
::Analogue Output:
 +
:::'''2 Vrms'''
 +
:::Output Impedance: '''300 Ω'''
 
|-
 
|-
−
|rowspan = "5"| AUDIO OUTPUTS <br> (3 slots for Line and Power cartridges)
+
||2pr 4mm/Banana/binding post terminals
−
||  
+
::
−
[[Selekt_DSM_Cartridges#SELEKT_DSM_CARTRIDGE_-_2Ch_LINE_OUT|<u>2-channel Line level analogue pre-amplifier output cartridge for Linn Selekt DSM </u>]]
+
{{Info:Majik DSM4 Power Amplifier}}
−
<font color="red">A DAC must be installed in this module</font>
 
 
|-
 
|-
 +
Headphone
 +
  
 
|-
 
|-
−
||
+
|| 1 x SPDIF (SPDIF input can be configured as a fixed volume Stereo digital output)
−
1 x SPDIF (SPDIF input can be configured as a fixed volume Stereo digital output)
+
::Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
  
 
||
 
||

Revision as of 10:39, 10 August 2020

Headphone
Majik DSM / 4
Overview
• Product Name:

Majik DSM

• Date of Introduction: August 2020


• Type: Network music player

with integrated pre/power amp

Dimensions

(H) 100 mm x (W) 350 mm x (D) 350 mm
(H) 3.95 inches x (W) 13.8 inches x (D) 13.8 inches

Weight 4.1 kg / 9 lb
Mains supply voltage (auto ranging)
100–120 V ac (±10%) 50–60 Hz
200–240 V ac (±10%) 50–60 Hz
Power consumption Sleep 15 W
Power continuous 500W
Ethernet 100Base-T RJ45
Supported file types FLAC, WAV, MP3, AAC, AIFF/AIFC, ALAC, OGG/VORBIS, WMA, DSD (DSF and DFF)
Audio sample rates 7.35 k, 8 k, 11.025 k, 12 k, 14.7 k, 16 k, 22.05 k, 24 k,29.4 k, 32 k, 44.1 k, 48 k, 88.2 k, 96 k, 176.4 k, 192 k
Word depths 16–24 bits
Control protocol Compatible with UPnP™ media servers, UPnP™ AV 1.0 control points
inputs

1off Ethernet

1off Wifi

Supports IEEE 802.11a/b/g/n/ac PSK/CCMP 1-CH

1off Bluetooth

Bluetooth v4.2
  • Audio is transferred using SBC encoding
  • This is not natively compatible with Googlecast.

1off HDMI ARC (Via HDMI Output)

4off HDMI 2.0
1off Configurrable input to either LINE or MM Phono,
Digitizing analog input stage with ADC Sample rate/resolution: 192kHz/24 bits
Line-in
max voltage 4.25Vrms
Input impedance - 50 kΩ
MM Phono
max voltage (1kHz): 67mV rms. (Gain +40dB),
Input impedance 47kΩ, 100pf
1off Toslink
Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
1off SPDIF (This is disabled if this socket is configured as a Output)
Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Nominal input voltage 0.5 V peak
1off USB Audio Class 2
Support sample rates 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Sources LAN
Internet radio
Tidal
Qobuz
Calm Radio
Spotify Connect
NetAux
Roon
ANALOGUE AUDIO OUTPUTS
Shares common volume control
1pr Stereo RCA phono socket,
Analogue Output:
2 Vrms
Output Impedance: 300 Ω
2pr 4mm/Banana/binding post terminals

Power Amplifier Output:

Bridged Class-D amplifier with post-filter feedback
2prs of 4mm/Banana/binding post terminals.
      Max output power:



100W/channel into 4Ω load,


50W / channel into 8Ω load


Dynamic Range      106dB
Gain: 20dB
1 x SPDIF (SPDIF input can be configured as a fixed volume Stereo digital output)
Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz


Upgrade options for HDMI Switching module
Linn Surround Module
Retrieved from "https://docs.linn.co.uk/wiki/index.php?title=Technical_Specification:Majik_DSM/4&oldid=22276"