Difference between revisions of "Klimax DSM"
(→Manuals) |
Neil-baker (talk | contribs) (→Product info) |
||
Line 8: | Line 8: | ||
* ''Product Name:'' Klimax DSM | * ''Product Name:'' Klimax DSM | ||
− | * ''Date of Introduction:'' October 2011 - May | + | * ''Date of Introduction:'' October 2011 - May 2014 |
::Replaced by [[Klimax DSM (Exakt Variant) | Klimax DSM/1]]<br> | ::Replaced by [[Klimax DSM (Exakt Variant) | Klimax DSM/1]]<br> | ||
* ''Type:'' Integrated digital music player and preamplifier | * ''Type:'' Integrated digital music player and preamplifier |
Revision as of 14:55, 23 November 2017
Contents
Getting Started
Product info
- Product Name: Klimax DSM
- Date of Introduction: October 2011 - May 2014
- Replaced by Klimax DSM/1
- Replaced by Klimax DSM/1
- Type: Integrated digital music player and preamplifier
- Features
- DS Design
- Dynamik Power Supply
- 96k/24bit Analogue to Digital convertion for Analogue input
Support
Latest software
Manuals
Third Party Software Copyright
HDMI Setup
Network Setup
Back Panel Connections
- MAINS INPUT - To connect to the mains electricity supply.
- FALLBACK - To put the device into Fallback mode (used when reprogramming the unit).
- TOSLINK IN- To connect sources with Toslink (optical) digital outputs.
- ETHERNET - To connect to a network.
- SPDIF IN - To connect sources with Spdif digital outputs.
- BALANCED IN RIGHT, LEFT - To connect sources with balanced (XLR) outputs.1 2
- BALANCED OUT RIGHT, LEFT - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.2
- UNBALANCED OUT RIGHT, LEFT - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.
- EARTH GROUND - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
- HDMI IN 1, 2, 3 - To connect sources with HDMI outputs.
- HDMI OUT - To connect to a display device with HDMI inputs.
1 XLR to RCA adaptors are supplied for connecting sources with unbalanced outputs.
2 Set to DELAY mode > DIRECT to pass through an Analogue volume control to the Analogue out.
Front Panel
- DISPLAY
- ON / OFF SWITCH
Installation
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
For further assistance, try our customer support pages or the Linn Forum.