Difference between revisions of "Sneaky Music DS"

MAINS INPUT - To connect to the mains electricity supply.
EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
SPEAKER OUTPUTS - To connect to loudspeakers
ANALOGUE OUTPUTS (RCA, variable/fixed level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.
DIGITAL OUT (TOSLINK) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
DIGITAL OUT (SPDIF) - To connect to an external DAC or computer that has an Spdif digital input.
RC5 ACCESSORY - To connect to a Linn BASIK3 or BASIK3-IR Knekt control device, (setup for RoomAmp2 connection (jumper link removed)). This requires a Knekt-CAT-5 cable to connect to the Linn DS
RS232 PORTS - To connect to other Linn devices that don't have ethernet.
FALLBACK - To put the device into Fallback mode (used when reprogramming)
ETHERNET - To connect to a network (100Base-T)

Front Panel Connections

Product status is indicated by the LED behind the Linn badge, default settings are shown below.

LED OFF - no power
LED ON DIM - product in standby
LED ON BRIGHT - product is active
LED SLOW FLASH - searching for IP address (boot)
LED FAST FLASH - fallback (re-programme)

Note: LED may be turned off using Linn Konfig.

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

Unpacking Information

Positioning Information

Amplifier Protection

FAQ's

Check:

For further assistance, try our customer support pages

@@ Line 1: / Line 1: @@
-[[Image:Majik DS-I silver 3Qright RGB 72dpi.jpg|right|435x143px]]
+[[Image:SneakyMusicDS Silv 3QRight RGB 72DPI.jpg|right|404x174px]]
 == '''Product info''' ==
@@ Line 5: / Line 5: @@
 * ''Product Name:'' Sneaky Music DS
-* ''Date of Introduction:'' March 2008
+* ''Date of Introduction:'' March 2008 - June 2017
+: Replaced by [[Sekrit DS]]
-* ''Type:'' Network Music Player.
+* ''Type:'' Digital music player
 * ''Features''
 ** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]
-** [http://www.linn.co.uk/why_dynamik Dynamik Power Supply]
+== '''Support''' ==
+[http://www.linn.co.uk/support Linn Support Site]
 == '''Latest software''' ==
-[http://www.linn.co.uk/ds_software Latest software releases]
+{{General:Latest_Product_SW}}
+== '''Manuals''' ==
-[http://oss.linn.co.uk/trac Open source software]
+[http://small.linncdn.com/product-catalogue/documents/Linn_Sneaky_Music_DS_Product_Information.pdf Product Information Sheet]
-== '''Manuals''' ==
+[http://small.linncdn.com/product-catalogue/documents/Linn_Sneaky_Music_DS_Owners_Manual.pdf Owners Manual]
-[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]
+[http://small.linncdn.com/product-catalogue/documents/Linn_Sneaky_Music_DS_Setup_Manual.pdf Setup Manual]
-[http://docs.linn.co.uk/wiki/index.php/Linn_Konfig_Manual Linn Konfig manual]
+{{General:Product_Manuals}}
-[http://www.linn.co.uk/files/ccf1286d/Sneaky_Music_DS_Product_Information.pdf Production Information Sheet, including Product Specifications]
+== '''Network Setup''' ==
-[http://www.linn.co.uk/files/07354a05/Pack_1387_Generic_Safety_Info.pdf Generic Safety Information]
+{{General:DS_Network_system}}
-[http://www.linn.co.uk/warranty On-line warranty registration]
+== '''Back Panel Connections''' ==
-== '''System Setup''' ==
+[[Image:Sneaky DS rear.jpg|center|720px]]
-[http://docs.linn.co.uk/wiki/index.php/DS_Network_Setup Recommended DS Network setup guide]
+# {{link:MAINS INPUT}}
+# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
+# '''SPEAKER OUTPUTS''' - To connect to loudspeakers
+# '''ANALOGUE OUTPUTS''' (RCA, variable/fixed level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.
+# '''DIGITAL OUT''' (TOSLINK) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
+# '''DIGITAL OUT''' (SPDIF) - To connect to an external DAC or computer that has an Spdif digital input.
+# '''RC5 ACCESSORY''' - To connect to a [[ DS_Control_Options#Knekt_BASIK3_RCU | Linn BASIK3 or BASIK3-IR]] Knekt control device, (setup for RoomAmp2 connection (jumper link removed)). This requires a Knekt-CAT-5 cable to connect to the Linn DS
+# '''RS232 PORTS''' - To connect to other Linn devices that don't have ethernet.
+# {{link:FALLBACK}}
+# {{link:ETHERNET}}
 <br>
-== '''Back Panel Connections''' ==
+== '''Front Panel Connections''' ==
-[[Image:Majik DS-I rear.jpg|center|731x222px|Image:Majik_DS-I_rear.jpg]] <br>
+[[Image:SneakyMusicDS Silv Front RGB 72DPI.jpg|center|747px]]
-# '''POWER SWITCH'''- For switching the power to the unit on and off
+Product status is indicated by the LED behind the Linn badge, default settings are shown below. <br>
-# '''MAINS INPUT''' - For connection to the mains supply. See Connecting to the mains supply.
-# '''SPDIF IN 1 to 3''' - For connection to digital electrical (coaxial) source products, such as a CD players, Set-top boxes, games consoles, DVD players etc.
-# '''SPDIF OUT''' - For connecting to a device with a digital electrical (coaxial) recording device.
-# '''TOSLINK IN 1 to 3''' - For connection to digital optical source products, such as a CD players, Set-top boxes, games consoles, DVD players etc.
-# '''EARTH GROUND''' - For connecting the earthing lead from the tonearm cable of a turntable, if required. Also for connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
-# '''TOSLINK OUT''' - For connecting to a device with a digital optical recording device.
-# '''RIGHT, LEFT SPEAKER''' - Amplified output for connection to loudspeakers
-# '''IR OUT 1 &amp; 2''''- Infrared flasher connectors. Allow the control via the handset of devices that accept infra-red signals.
-# '''ETHERNET''' - For connecting the unit to the Internet router.
-# '''FALLBACK''' - Used when reprogramming the unit.
-# '''RS232 PORTS''' - For connection to Linn source products without ethernet ports.
-# '''ANALOGUE AUDIO INPUTS 1 to 4''' - For connection to line-level source products, such as a CD player, radiotuner, tape deck, etc. INPUT 4 can be configured as a moving-magnet, moving-coil or line-level input (the factory setting is moving-magnet).
-# '''PRE OUT''' - Line-level outputs for connection to an external power amplifier in a multi-amp or aktiv system.
-# '''LINE OUT''' - Fixed volume outputs for connection to a tape recorder or other analogue recording device.
-== '''Front Panel Connections''' ==
+'''LED OFF''' - no power <br>'''LED ON DIM''' - product in standby <br>'''LED ON BRIGHT''' - product is active <br>'''LED SLOW FLASH''' - searching for IP address (boot) <br>'''LED FAST FLASH''' - fallback (re-programme)
-[[Image:Majik DS-I front.jpg|center|747x245px]]
-# '''MUTE BUTTON''' - Mutes and un-mutes the volume
+Note: LED may be turned off using Linn Konfig. <br><br>
-# '''FRONT PANEL DISPLAY'''
-# '''STANDBY BUTTON''' - Brings the unit out of, or puts into, standby
-# '''VOLUME -/+''' - Adjust the volume level
-# '''HEADPHONE SOCKET''' - Accepts a 3.5 mm headphone jack
-# '''AUXILIARY SOURCE SOCKET''' - For connecting a portable source, e.g. MP3 player. Accepts a 3.5 mm jack.
-# '''SOURCE -/+''' - Changes Sources
 == '''Installation''' ==
@@ Line 73: / Line 66: @@
 Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
-* '''Unpacking''' - Please read the [http://docs.linn.co.uk/wiki/index.php/product_unpacking information] on unpacking your Sneaky Music DS.
-* '''Positioning''' - Please read the [http://docs.linn.co.uk/wiki/index.php/product_positioning information] on positioning your Sneaky Music DS.
+* [[product_unpacking|Unpacking Information]]
+* [[product_positioning|Positioning Information]]
+* [[amplifier_protection|Amplifier Protection]]
+== '''FAQ's''' ==
+Check:
+:* [[FAQ-Linn DS/DSM|'''<u>FAQ-Linn DS/DSM</u>''']]
+:* [[FAQ-Linn_DS/DSM#Linn_Sneaky_Music_DS.2FSekrit_DS|<u>'''FAQ-Sneaky Music DS'''</u>]]
-* '''Important Information:Protection''' - The Sneaky Music DS features over-current and over-temperature [http://docs.linn.co.uk/wiki/index.php/amplifier_protection protection]
-For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]
+For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages
+[[Category:Linn DS]]
+[[Category:CORE1]]

Difference between revisions of "Sneaky Music DS"

Latest revision as of 10:53, 17 August 2022

Contents

Product info

Support

Latest software

Manuals

Network Setup

Back Panel Connections

Front Panel Connections

Installation

FAQ's

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Product selection

Software/Setup

FAQ's

Support

Indexes

Useful Websites

Search

Tools