Difference between revisions of "Majik ExaktBox-I"
m (→Product info) |
m (→Supported speakers) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 65: | Line 65: | ||
# '''MAINS INPUT''' - To connect to the mains electricity supply. | # '''MAINS INPUT''' - To connect to the mains electricity supply. | ||
# '''EXAKT LINK'''- To connect to Exakt compatible devices (CAT-5 cables) | # '''EXAKT LINK'''- To connect to Exakt compatible devices (CAT-5 cables) | ||
| − | # '''SPEAKER OUTPUTS''' (4 mm, Banana) - To connect to ''' | + | # '''SPEAKER OUTPUTS''' (4 mm, Banana) - To connect to '''ACTIVE''' speakers (100W into 4ohm) |
# '''ANALOGUE OUTPUTS''' (RCA, variable level) - To connect to power amplifier with unbalanced (RCA) analogue inputs. (300ohm Output impedance) | # '''ANALOGUE OUTPUTS''' (RCA, variable level) - To connect to power amplifier with unbalanced (RCA) analogue inputs. (300ohm Output impedance) | ||
# '''FALLBACK''' - Primarily for Linn service use only, to put the device into Fallback mode (used when reprogramming the unit). | # '''FALLBACK''' - Primarily for Linn service use only, to put the device into Fallback mode (used when reprogramming the unit). | ||
| Line 107: | Line 107: | ||
If there are any mis-wires or wrong speaker definitions in the Exaktbox, you may blow the speaker drive units, so take care. | If there are any mis-wires or wrong speaker definitions in the Exaktbox, you may blow the speaker drive units, so take care. | ||
| − | If this is the first connection, use the standard | + | If this is the first connection, use the standard Active test scenario. |
# Put the Linn DS/DSM into Sleep mode to power down the Majik ExaktBox-I. | # Put the Linn DS/DSM into Sleep mode to power down the Majik ExaktBox-I. | ||
# Disconnect any Majik Exaktbox-I to speakers connections | # Disconnect any Majik Exaktbox-I to speakers connections | ||
| Line 211: | Line 211: | ||
Examples using '''one''' Majik Exaktbox-I<br> | Examples using '''one''' Majik Exaktbox-I<br> | ||
<span style="color:red">Note: It should be noted that information may at times be out of date and should not be used as a current list of what is supported. check <span class="plainlinks">[https://www.linn.co.uk/technology/exakt#exakt-compatible-speakers <u>www.Linn.co.uk</u>]</span></span><br> | <span style="color:red">Note: It should be noted that information may at times be out of date and should not be used as a current list of what is supported. check <span class="plainlinks">[https://www.linn.co.uk/technology/exakt#exakt-compatible-speakers <u>www.Linn.co.uk</u>]</span></span><br> | ||
| − | '''These speakers must be made externally | + | '''These speakers must be made externally Active'''<br> |
| − | Note: Speakers that cannot be made externally | + | Note: Speakers that cannot be made externally Active e.g. Av5110, UNIK, Diskreet etc cannot be used with the Exaktbox<br> |
* '''[[Majik_ExaktBox_I#Keltik | pair Keltik]]''' | * '''[[Majik_ExaktBox_I#Keltik | pair Keltik]]''' | ||
<br> | <br> | ||
Latest revision as of 13:21, 19 November 2024
Contents
Product info
- Product Name:
- Majik ExaktBox-I
- Date of Introduction:
- October 2015
- Type: Digital Crossover with Exakt Technology and Integrated Amplifiers
Supports *ONE or TWO loudspeakers ONLY as digital crossover Each loudspeaker can only be 2-way, 3-way or 4-way Software upgradable to support more and more loudspeakers Connects directly to externally Active speakers or power amplifiers and externally Active speakers OR *Can be used to directly feed Surround channels in a Surround Sound system
- It can only be used with Exakt-Link output products
- Features
- Specification
- Power output: 8 x 100W into 4 ohms
- Line Level output: 3 x 0dBv from 300ohm source impedance
- Weight: 8.8 kg / 19lb
- Dimensions:
- Metric (H) 80 mm x (W) 381 mm x (D) 355 mm
- Imperial(H) 3.15 inches x (W) 15 inches x (D) 14 inches
Support
Installation
As this is an Exaktbox the initial setup must be performed with a Local Area Network that has Internet access. Otherwise, Konfig cannot set the speaker channel, Speaker profile and Space Optimisation of these products
Latest software
Details of latest Product release software
Manuals
Back Panel Connections
- MAINS INPUT - To connect to the mains electricity supply.
- EXAKT LINK- To connect to Exakt compatible devices (CAT-5 cables)
- SPEAKER OUTPUTS (4 mm, Banana) - To connect to ACTIVE speakers (100W into 4ohm)
- ANALOGUE OUTPUTS (RCA, variable level) - To connect to power amplifier with unbalanced (RCA) analogue inputs. (300ohm Output impedance)
- FALLBACK - Primarily for Linn service use only, to put the device into Fallback mode (used when reprogramming the unit).
Note: Both 4 mm and RCA outputs are active simultaneously.
EXAKT LINK Connections
For example, if you are using a Majik DSM/1 to connect to an Akurate ExaktBox:
The Exakt-link cable can supply digital audio for multiple speakers.
Use Konfig > Exakt Setup pages to declare if Channel1 is left or right-hand channel and Channel2 is left or right-hand channel
Check HERE for more information of Exakt link connection
Speaker/Power Amplifier connections
Speaker terminals
The binding post terminals can be used as sockets for the connection of 4 mm banana plugs or can be used as binding posts for the connection of bare wires or spade terminated cables by loosening the outer section of the binding post (do not attempt to completely remove this outer section), inserting the cable or terminal and re-tightening the binding post to clamp it in place. Ensure that all the binding posts are tight.
We recommend using Class 2 wiring of at least 16AWG.
DOUBLE-CHECK the wiring from the Exaktbox-I to speaker terminals!
If there are any mis-wires or wrong speaker definitions in the Exaktbox, you may blow the speaker drive units, so take care.
If this is the first connection, use the standard Active test scenario.
- Put the Linn DS/DSM into Sleep mode to power down the Majik ExaktBox-I.
- Disconnect any Majik Exaktbox-I to speakers connections
- Set to a low-volume value, e.g. 40-50
- Do the following tests 5,6,7,8 starting with the Bass connections, then Midrange, then tweeter and finally super tweeter in that order.
- Connect the respective (Bass or Mid or tweeter or super-tweeter) Exaktbox-I connection to the Bass connection (Bass or Mid or tweeter or super-tweeter) of the speaker.
- Bring the Linn DS/DSM out of Sleep mode and play some Music. Check that you are only getting (Bass or Mid or tweeter or super-tweeter) audio from that speaker drive unit.
- Stop the Music playing and put the Linn DS/DSM into Sleep mode
- Leave this cable connected, go to Step4 and connect the next speaker drive unit in the list.
If you change the speaker or variant, this may also change the Exaktbox-I terminations, so DOUBLE CHECK
To see the Exaktbox terminations for each speaker, click here
EXAKT LED Status
|
LED |
OFF |
ON |
Flash / Blink |
| 0 Master Port | No Link | Link Discovered | Link Activity |
| 1 Audio Clock | No Clock | Clock locked | Clock not locked |
| 2 Slave Port | No Link | Link Enabled | Link Activity |
| 3 Software Status | Not Configured | Running | Hardware Fault |
Installation
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
- The ExaktBox-I is shipped from Linn with no speaker setup and must be configured with Konfig software.
Exakt options
Exakt usage can be found in Klimax_Exakt_System
One of the benefits of the Exakt system is that you can easily set up and optimise your listening environment. Simply download the latest version of Konfig (version 4.11.7 or higher) and follow the Space_Optimsation+ & Space Optimisation+ (Advanced)
Supported speakers
When used in this mode any spare outputs CANNOT be used for the either 6 or 8 channel passthrough Surround mode
Select CONNECTION HELP for up-to-date wiring information
Examples using one Majik Exaktbox-I
Note: It should be noted that information may at times be out of date and should not be used as a current list of what is supported. check www.Linn.co.uk
These speakers must be made externally Active
Note: Speakers that cannot be made externally Active e.g. Av5110, UNIK, Diskreet etc cannot be used with the Exaktbox
- pair Ninka speakers- bi-amped or Tri-amped
- pair Keilidh- Bi-Amped & Tri-Amped (t1-Tweeter 15, T2-Tweeter 038)
- single Ekwal - Bi-Amped & Tri-Amped
- pair Espek
- single AV5120 - Bi-Amped & Tri-Amped
- pair AV5140
- pair Kaber
- pair Katan
- pair of original Isobarik
Unused Channels CANNOT/u> be used for another speaker or purpose.
The Majik Exaktbox-I will only work with loudspeakers up to 4-way. This means that you CANNOT use this Majik Exaktbox-I to drive 5-way, or higher, speakers such as the AkuBarik loudspeakers.
non-Linn speakers
Examples using one Majik Exaktbox-I
Note: It should be noted that information may at times be out of date and should not be used as a current list of what is supported. check www.Linn.co.uk
- Pair B&W 802 Diamond - Tri-amped or Quad-amped
- Pair B&W Nautilus
- JBL K2 S9900
- Pair KUDOS Super10
- Pair KUDOS Super20
- Pair KUDOS Titan 505
- Pair KUDOS Titan 606
- Pair KUDOS Titan 707
- Pair KUDOS Titan 808
- PMC Twenty 26
- KEF Reference 3
- KEF Reference 5
Example of use with a Majik Exaktbox-I supported speaker
or
ExaktBox Surround Channel selection
E.g. But NOT a LFE AND MONO on the same Exaktbox |
above is an Exaktbox configured for "6 channel passthrough" |
Trouble shooting
Check Exakt trouble shooting
For further assistance, try our customer support pages
