Kustom DSM Setup

Linn Kustom DSM:

Back to Kustom DSM HOME page

Product info

• Product Name: Kustom DSM

• Date of Introduction: December 2019

• Type: Multi-zone Network music player

⊕ Versions:

Z4 - 2 Streamers with 4 zones

Z8 - 4 Streamers with 8 zones

• Features

• Linn DS Streaming technology shared with multiple zones including Songcast & NetAux (Airplay)
• Each Streamer has four dedicated inputs.(1 x Analogue, 2 x Digital and 1 x HDMI-ARC)
• Compact 1U 19" Rack sizing.
• Stereo PRE-OUT sockets for each zone.
• Independent Zone Standby/Mute/Volume controls.
• Master Volume controls for each Streamer Group
• Flexibility to add amplifiers and speakers of your choice throughout the installation.
• Configurable Streamer/Zone grouping at the time of installation.
• Integration with Control4 & Crestron control systems.
• Front panel indicators to show the configuration and operation of each Zone.
• UTOPIK supply fitted, as standard from October 2023

Hardware Upgrades

UTOPIK Power Supply upgrade: Improved power supply

Note: It should be noted that this upgrade information may at times be out of date and should not be used as a current list of what upgrades are available.

Setup

Initial Setup

Unpacking

Remove the Kustom DSM from the packing and check you have all the accessories.
Now place the product you want it to be.

REQUIRED CONNECTION

1. A mains power socket

2. An Ethernet network connection

The Kustom DSM has an internal network switch that will connect to the 2off(Z4) or 4off(Z8) Streamers.

Each Streamer has its own MAC address and IP address

Optional input connections

Each Stream has

1off HDMI ARC socket

1off RCA SPDIF socket

1off TOSLINK socket

1pr RCA Analogue sockets

Each Zone output connections

1pr RCA Analogue sockets to connect to:

External power amplifier,

Powered speakers,

Additional Matrix switchers......

Positioning

Review the advised Positioning guide to ensure safe and cool operation

Top Of Page Index

Setup and changes

System Design

Kustom DSM operation

The Kustom DSM shares any internal Streamer with dedicated/pre-assigned Zones. This will allow common areas to share the same source with local volume and common volume controls.

Kustom Z4

This has TWO Streamers, (in other words Linn DSM's), and FOUR> Zones.

Each Streamer can be dedicated to 0-4 Zones. (You may want to have one Streamer feeding all four Zones so the remaining Streamer is unused)

Each Streamer can Songcast to other Streamers/Linn DS/DSM/HUB's

Kustom Z8

This has FOUR Streamers, (in other words Linn DSM's), and EIGHT> Zones.

Each Streamer can be dedicated to 0-8 Zones. (You may want to have one Streamer feeding all eight Zones so the remaining Streamers are unused)

Each Streamer can Songcast to other Streamers/Linn DS/DSM/HUB's

You CANNOT dedicated a Zone to multiple Streamers, but you CAN dedicate a Streamer to muliple Zones.

Linn SONGCAST will allow you to share a Streamers audio to other Streamers and their dedicated Zones

Requirements for Crestron/Control4 operation

Linn Kazoo Server with Gateway API enabled

Standard operation

The Streamer / Zone configuration should be reviewed before installation.

• When you bring a Zone out of Standby then this automatically bring the Streamer and ALL Konfigured Zones of out of Standby. Therefore ONLY configure Streamer/Zones to Zones that are always connected.

E.g with Bedroom and Ensuite the typical scenarion in the morning is to go into Ensuite and switch on the Radio. if the Ensuite Zone and Bedroom Zone share the same Streamer then the Bedroom zone will also play the Radio at it last volume use. This is probably not advised.

The solution is to have Streamer1 for the Bedroom and Streamer2 for the Ensuite. If you want to listen to the same Music then these Streamers can easily be Songcasted/Grouped/Networked together.

• Zones within a Streamer group can be independently muted and the only umuted by either

• Pressing the Zone Mute button again
• Bringing the Streamer in to/out of Standby

There are two ways to configure, (if required), your Linn DS/DSM player/Speakers etc:

1. Web-browser App called Manage systems that can also be used on your Tablet:

Before you do anything you will need to have a Linn Account. This is a simple process and can only be performed using the Kazoo App or Linn App.
Details on how to create your Linn Account and how to use Manage systems can be found in the Manage Systems page.

2. Windows 10 PC or MAC OSX app called Konfig:

This Konfig App can be downloaded from KONFIG App

This will allow changing the Room name, Linn DS/DSM name, input name and other settings. This can be changes by yourself and/or your Linn Retailer.

Details of most of the options are listed in the Konfig Manual, this covers many options

Konfig has been deprecated and replaced by Manage Systems.

Note: Manage Systems has taken over from Konfig and we would prefer you to use Manage Systems to setup an configure your Linn products.

Setup using Kloud Konfig / System Management

The <FACTORY DEFAULT> of the Kustom DSM has no Streamers attached to no Zones and will not be attached to your Linn Account:

Use Manage systems to link the Kustom DSM to you Linn Account.

1.Open the | Manage systems and select you Kustom DSM from the list and under GENERAL

• Select CONFIGURE This will show,:

• Press
  

This will show the first Kustom Streamer and allow you to change Streamer and Zone names attach Zones to that Steamer:

• Hot NEXT to go to next Kustom Streamer....

2.You can then edit which Streamer will feed which Zone. REBOOT after the configuration has been selected to apply changes

---

3. Click on the CONFIGURE at the Kustom DSM to Streamer configure that streamer and attached Zone devices. You can change the names and settings of each Stream and Zone.

NOTE

• DO NOT HAVE THE STREAMER NAME THE SAME AS ANY ZONE NAME. THIS CAN CAUSE ERRATIC OPERATION OF THE CONTROL SOFTWARE (Kazoo, Linn App, Crestron, Control4...)
• After REBOOT, any Streamers that are not connected to any Zones are invisible all control interfaces, (Kazoo, Linn App, Control4 etc)

---

Setup using Konfig (deprecated)

The <FACTORY DEFAULT> of the Kustom DSM has no Streamers attached to no Zones.
1.Go into Konfig and Select you Kustom DSM followed by the ZONE tab. This will show, (for a Z8):

---

2.You can then edit which Streamer will feed which Zone. REBOOT after the configuration has been selected to apply changes

---

3. Click on the Arrow at the Kustom DSM to expand/contract the Stream and Zone devices. You can change the names and settings of each Stream and Zone.

NOTE

• DO NOT HAVE THE STREAMER NAME THE SAME AS ANY ZONE NAME. THIS CAN CAUSE ERRATIC OPERATION OF THE CONTROL SOFTWARE (Kazoo, Linn App, Crestron, Control4...)
• After REBOOT, any Streamers that are not connected to any Zones are invisible all control interfaces, (Kazoo, Linn App, Control4 etc)

---

Examples

Example 1

Kustom DSM Z4 using Crestron and/or Kazoo/LinnApp

A 5 zone system with the Kustom DSM Z4 and Series3 DSM

---

Click for PDF

Creston UI will show all changes made by Kazoo/Linn App and user front panel operation

---

Click for PDF

Control4 does not show any changes in volume/input/Standby states made by other control interfaces

---

Click on the above images to download PDF version

Streamer1 is feeding the

Zone1: Lounge zone and

Zone4: Patio zone.

Streamer 1 Sources

TV-ARC: giving audio from Set top box(Satellite.Cable etc), Game station, Bluray, Aerial broadcasts etc

Analogue: giving audio from CD Player¹

TOSLINK: giving audio from DAB/FM radio¹

SPDIF: giving audio from DAT Player¹

Streamer2 is feeding the

Zone2: Bedroom and

Zone3: Bathroom.

Streamer 2 Sources

TV-ARC: giving audio from Set top box(Satellite.Cable etc), Game station, Bluray, Aerial broadcasts etc

Analogue: unused in this sceanrio

TOSLINK: unused in this sceanrio

SPDIF: unused in this sceanrio

Series3 DSM is feeding the Kitchen

Note:

¹ These are only example stereo sources. The Kustom DSM already had streaming playback to allow Music from internet radio, Tidal, Qobuz, Calm radio & playlists.

● Each Streamer source is dedicated to that Streamer and cannot be linked seperately to another streamer.

● If you are using Crestron or Control4 the you MUST have the Linn Kazoo Server - Gateway service running.

This will allow you to.....

• Lounge & Patio to each have their own volume and Standby controls and listen to the Kustom Streamer1streaming sources., as well as TV audio, CD player, DAB/FM etc.
• Kitchen to listen to the Series3 streaming sources
• Bedroom & Bathroom to each have their own volume and Standby controls and listen to the Kustom Streamer2 streaming sources., as well as TV audio((+BluRay) etc.
• The Series3 (Kitchen) can share its audio to the Streamer1 (Lounge and/or Patio) and/or streamer2 (Bedroom and/orBathroom) and subsequent zones.
• Streamer1 can share its audio with the Series3 and/or streamer2 (Bedroom and/or Bathroom)
• Streamer2 can share its audio with the Series3 and..or Streamer1 (Lounge and/or Patio)

This will allow you to have Party music from one source or each Streamer/Linn DS/DSM listen to it own Music.

Crestron works well with the the Kazoo/LinnApp and will update its User Interface whenever there are changes with the Kazoo/Linn App

Note:

1. Each Streamers source can ONLY be shared to other Streamers and Zones using the Songcast App. That is, that Streamer must be playing that source BEFORE it can be shared.

1. You can easily share the Analogue source outputs with different Streamer inputs.

Or if the sources also have Toslink or SPDIF outputs then these other source outputs can be shared with different streamer inputs.

1. From Kazoo V4.13.67 & LinnApp V4.2.13 this now allows seperate Standby controls of each Streamer and Znne. The only restriction is when you bring a Streamer out of Standby then this will bring all dedicated Zones out of Standby. If you then keep the Streamer out of Standby then you can put each zone in and out of Standby independently.

---

Top Of Page Index

Example 2

Kustom DSM Z8 using Crestron and/or Kazoo/LinnApp

A 7 zone system with the Kustom DSM Z8, Akurate DSM and Series3 DSM

---

Click for ODF

Creston UI will show all changes made by Kazoo/Linn App and user front panel operation

---

Click for PDF

Control4 does not show any changes in volume/input/Standby states made by other control interfaces

---

Click on the above image to download PDF version

Streamer 1 is feeding the

Zone1: Master Bedroom

Streamer 1 external Sources

None but you can wire a HDMI Switch/extender and share a Satellite box. The HDMI switcher HDMI-ARC can then be fed to the Kustom DSM HDMI-ARC-1

Streamer 2 is feeding the

Zone2: This allows the bathroom to be shared by any other Streamer/DS/DSM to play the audio from that area.

Streamer 2 external Sources

None, but can listen to the same as another Zone internal or external source

Streamer 3 is feeding the

Zone3: Kitchen,

Zone4: Dining and

Zone5: Terrace,

Streamer 3 Sources

TV-ARC: giving audio from Set top box(Satellite.Cable etc), Game station, Bluray, Aerial broadcasts or whatever this TV is playing etc

Series3 DSM is feeding the Guest Rooom

Akurate DSM is feeding the Lounge

Akurate DSM external sources

TV-ARC: giving audio from Set top box(Satellite.Cable etc), Game station, Bluray, Aerial broadcasts etc

Analogue: giving audio from CD Player¹

Note:

¹ These are only example stereo sources. The Kustom DSM already had streaming playback to allow Music from internet radio, Tidal, Qobuz, Calm radio & playlists.

● Each Streamer source is dedicated to that Streamer and cannot be linked seperately to another streamer.

● If you are using Crestron or Control4 the you MUST have the Linn Kazoo Server - Gateway service running.

This will allow you to.....

• Kitchen, Dining & Terrace to each have their own volume and Standby controls and listen to the Kustom Streamer1streaming sources., as well as TV audio, CD player, DAB/FM etc.
• Guest Bedroom to listen to the Series3 streaming sources
• The Akurate DSM (Lounge) can share its audio using Songcast to the Streamer1 (Master Bedroom)

and/or Streamer 2 (Bathroom)

and/or Streamer 3 (Kitchen/Dining/Terrace)

and/or Guest Bedroom

• Streamer1 can share its audio with the Series3 and/or streamer2 (Guest Bedroom and/or Bathroom)

..........

This will allows you to have Party music from one source or each Streamer/Linn DS/DSM listen to it's own Music.

Crestron works well with the Kazoo/LinnApp and will update its User Interface whenever there are changes with the Kazoo/Linn App

Note:

1. Each Streamers source can ONLY be shared to other Streamers and Zones using the Songcast App. That is, that Streamer must be playing that source BEFORE it can be shared.

1. You can easily share the Analogue source outputs with different Streamer inputs.

Or if the sources also have Toslink or SPDIF outputs then these other source outputs can be shared with different streamer inputs.

1. From Kazoo V4.13.67 & LinnApp V4.2.13 this now allows separate Standby controls of each Streamer and Zone. The only restriction is when you bring a Streamer out of Standby then this will bring all dedicated Zones out of Standby. If you then keep the Streamer out of Standby then you can put each zone in and out of Standby independently.

---

Using the Kustom DSM

Front panel LED's

          

Kustom DSM Z4

Kustom DSM Z8

During normal operation the colour of each Zone (1-8) LED will signify the state that it is in.

The Zone LED color signifys the mappings, that is, the Streamer that Zone it is configured to use :

Zone LED Colour	Streamer
OFF	None Defined
Magenta	1
Cyan	2
Blue	3
Green	4

Note: Pre-production software had Streamer 3 Green and Streamer 4 Yellow

Example behaviour of Zone LEDs listening to Streamer1:

	Not Mapped to Streamer
	STOPPED or In Standby
	PLAYING
	MUTED
	In Fallback (Either updating Firmware or waiting for firmware to be updated)

Crestron

Crestron

There is extensive and actively maintained support for Linn devices within Crestron systems. These drivers allow for potentially several Linn devices to be controlled through a Crestron control point (touch panel, iPad, etc). This support works alongside our own software, Linn App. For systems with many devices the driver organises the available rooms into a selection menu, and you can switch between active room for each Crestron control point as in Linn App. This support allows for seamless integration of the Kustom DSM alongside other DS/DSM devices.

There is a choice of support depending on the Crestron hardware available. Each option comes with setup guides and a demo project with a touch panel designed in VisionTools Pro-e for testing out their capabilities. The driver can then be customized and integrated into a customer’s system alongside other home automation features. For all options, the driver communicates with Linn’s CI Gateway software that can be enabled on certain Linn devices. If one of these devices is not available, then Linn Kazoo Server includes the CI Gateway and can be used instead.

For Crestron 4-Series Processors:

Click >HERE< for the Linn Crestron 4-Series Driver for SIMPL Windows

Click >HERE< for the Linn Crestron 4-Series Driver for SIMPL#Pro

These two options offer the same underlying driver with different approaches, whether you wish to design a system using SIMPL Windows or SIMPL#Pro. They offer all the basic control functionality of the Linn Lite driver alongside many extra features and optional modules that add extra functionality such as

• More extensive metadata and seeking within audio tracks.

• Browsing and searching of streaming services: Airable radio, TIDAL, Qobuz

• Modifying the active playlist of a Linn DS/DSM

• Rearranging the groupings of Linn DS/DSM devices to play the same audio source.

• Browsing and creation of Linn account playlists

• Browsing and searching of a local media server (such as Minim, Twonky, or Kazoo Server)

If you wish to keep the implementation simple, however, then these optional modules can be omitted.

For Crestron Home Systems:

Click >HERE< for Linn Drivers for Crestron Home

This bundle of drivers developed using the Crestron Drivers SDK allows for the inclusion of single devices in a Crestron Home system. These offer limited control of functionality:

• Natively integrated source, volume, and standby control

• Natively integrated transport controls for the playlist source

• An extension driver offers additional functionality such as metadata and further transport control. It also allows you to select for playback: pins, recent airable stations, account playlists.

Any DS/DSM model can be used in Crestron Home. There is limited support for the Kustom DSM where each stream is treated as a separate standalone device and zones are disregarded. Grouping functionality within Crestron Home is largely restricted..

For Crestron 3-Series Processors:

Click >HERE< for the Linn Lite Crestron Driver for SIMPL Windows

This driver offers control over basic functionality of Linn DS/DSM devices such as standby, volume, transport control (play/pause/skip/shuffle/repeat), etc. Metadata about what is currently playing can be displayed, and pin selection allows an easy way to quickly select for playback from some favourite options. A string input allows commands using a Linn-defined protocol, LPEC, to be sent directly to rooms, allowing for macros to be set up.

Control4

Control4 with Kazoo Server or CI-Gateway

***THESE ARE NOW AVAILABLE UNDER CERTIFIED ONLINE DATABASE***

"Linn DS Series" & "Linn DS Network (32 Players)"

The Control4 module provides the following features,

• Simple integration and installation via a Linn provided Control4 certified module
• Support for cloud and local music through Control4 virtual sources for browsing and searching Tidal, Qobuz, TuneIn, Kazoo Server and Minim Server
• Support for AV installations, such as Kaleidescape, through volume and source switching modules
• Support for Control4 zone grouping
• OS 2.10 (Upto V145), & OS 3 compatible
• OS 3 and Kustom DSM support use V145 or later

Linn Control4 setup guide document

Click >HERE< for the Control4 Driver FAQ's & download

Note:

July 16th 2024- Control4 driver V178

Control of the Linn DS/DSM using a PC/MAC/Tablets & Phones

Initial installation

Linn App

The Linn DS/DSM can be done from many control points at the same time.

The name of this control App/software is Linn App

Apple App store - Linn App for iPhone / iPad

        or

Google Play - Linn App for Android Phone/Tablet

Kazoo (Aug 2023 - Ceased all development)

The Linn DS/DSM can be done from many control points at the same time.
Note: from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)

The name of this control App/software is KAZOO..

Kazoo control App/software is available for

| Windows Kazoo download

from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)

MAC OSX Kazoo download

from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)

Android Kazoo for Android Phone/Tablet download

from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)

Using the Linn DS/DSM control software

For full operation of Kustom DSM you will need to use Linn App and/or Kazoo 4.13.64 >

As you can see from the above section there are multiple software/Apps for different control devices. Although Kazoo has the same style of control in each device, there are minor differences depending on what your control device is. This is why we have different Manuals.
These manuals should only be used as a basic guide for what the buttons can do. We would recommend just using the App/Software and only using the guide if you are having difficulty or want to see what more features are available.

These guides may show some features that are not available, or not have not be configured to work in your system. If you required more information then please contact your Retailer or Linn Support Site

iPad / iPhone / Android Linn App

• Quick Start Linn App User Guide for Android phone/Tablet & Apple iPad/iPhone

Windows Kazoo

from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)

Windows7

• Kazoo User Guide for for Windows7

Windows 8 / 10 / 11

• Kazoo User Guide for Windows 8 / 10 / 11

MAC/MACBook Kazoo

from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)

up to Yosemite (OSX 10.10)]

• Kazoo User Guide for for iMac up to Yosemite (10.10)

El Capitan (10.11 >)

• Kazoo User Guide for iMac El Capitan (10.11 >) onwards.. (including OSX Catalina 10.15)

iPad/iPhone Kazoo

from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)

• Kazoo User Guide for Apple iPad/iPhone

Android Kazoo

from April 2023 : Tidal have removed support for the Linn Kazoo application on ALL platforms. We recommend trying the new Linn app (available on iOS and Android)

• Kazoo User Guide for Android

Top Of Page Index

General products manuals and information

Controlling the product User Guide

Product setup:Konfig user manual

Safety Information

Warranty Terms and Conditions

Third-Party Software Copyright

Top Of Page Index

Streaming Services

Tidal

Tidal

Click for more....

Tidal This will work with Linn DS/DSM products running Davaar23 firmware. This can be updated using the Konfig software.

To create and add Tidal tracks to a Linn DS/DSM playlist, you require Kazoo or Linn App

Tidal is supported in countries listed HERE on the Tidal website

Check for Tidal FAQ's with Linn DS/DSM

Qobuz

Qobuz

Click for more....

Qobuz Streaming CD or Hi-Res quality music

To create and add Qobuz tracks to a Linn DS/DSM playlist you require Kazoo or Linn App

Check for Qobuz FAQ's with LInn DS/DSM

Calm Radio

Calm Radio

Click for more....

Calm Radio "Music that helps you get through the day "

To create and add Calm Radio tracks to a Linn DS/DSM playlist you require Kazoo or Linn App

Check Check for Calm Radio FAQ's with Linn DS/DSM

Spotify Connect

Spotify Connect

Click for more....

Spotify Connect can now be used on Linn products using firmware Davaar59 (Aug 2017) or later firmware. (That is, if your Linn DS/DSM has had a software update after Aug 2017 then you can use Spotify connect)

This allows you to select and play your Spotify music on your Linn DS/DSM players and use the internal volume control on the Linn DS/DSM.

To connect your Spotify account to the Linn DS/DSM:

1. On your control device, iPad/Android/PC/MAC etc, connect to the same computer network as your Linn DS/DSM
2. Start your Spotify app, (if it is already open then close the App, wait a few seconds, and open the App)
3. Now check the Spotify Speakers icon to find your Linn DS. (In some cases you may have to power cycle your Linn DS/DSM before this is seen)
4. Select your Linn product, and you can now play to the Linn DS/DSM from the Spotify account and control the Linn DS/DSM volume.

This is web controlled and if your Linn DS/DSM has already been paired with your Spotify account you will be able to control even if you are not on the same ethernet network.(So be careful that if you accidentally select the Linn DS/DSM as a Spotify speaker and put the volume up high, and you are not at home)

Check FAQ Spotify Connect for more information.

Roon

"Roon Tested"

Click for more....

from Davaar 106 onwards, (March 2024 >), the following products are also Roon Ready and support RAAT audio distribution:

▼ Roon Ready   Klimax DSM /3 (2020 Variant)   Kustom DSM   Majik DSM /4 (2020 Variant)   Selekt DSM /0   Selekt DSM /0 Classic Hub   Selekt DSM /1 Classic Hub   Selekt DSM /1 Edition Hub   Series 3 RAAT is also included with Linn DS/DSM's updated to Organik DAC's

Change Roon Protocol to Roon Ready in Manage Systems > Music tab.

This will also allow you to decide, if the Linn DS/DSM supports has the DACs to support DSD playback, which products decode the DSD. Either Roon decoding or Linn DS/DSM direct playback.

All Linn DS/DSM ARE ROON CERTIFIED devices

The Linn DS/DSM requires Davaar63 (May 2018) or later firmware to work with Roon V1.5 and above.(That is, if your Linn DS/DS/HUB has had a software update after May 2018 then you can use Roon)

This allows full hi-res audio, (192k/24bit) playback controlled by the Roon system

Songcast is used to share audio between Linn Products when using Roon. It does not use RAAT (Roon Advanced Audio Transport) for sharing Music, so cannot be set up as a Roon-Ready sharer.

Roon Tested Setup
On Linn DS proxy setups, Linn DS with Linn Kontrol preamplifier connected with RS232, the Roon volume control will not control the Linn Kontrol volume.
A Roon Core is required in your network system to allow Roon to control your Linn DS/DSM.
ENABLE the Linn DS/DSM player in the Roon - Settings - Audio - NETWORKED section.
In the Settings > Setup make sure that the Subnet of Linn Streaming is the same as the network that the Linn DS is on. Otherwise, they will not show in the Audio

Control
Primary control is through Roon.
:Transport IR is disabled on the Linn DS/DSM when the Roon input is selected from Linn DS firmware release Davaar80 (Nov 2020)

Issues
Roon uses the Linn DS/DSM as a media player, the control interface IS Roon.

• I cannot see any Linn DS in the Audio list...

If you cannot see any Linn DS product in the Audio list then check that with the setup the correct Linn Streaming subnet (network address range).

E.g. if your Linn DS has IP address 192.168.1.34 then its subnet is 192.168.1.0

• I am only getting Airplay quality audio from the Linn DS using Roon

In Roon: Settings - Audio setup page, you will have devices listed with "via Linn Streaming" and devices listed with "via Airplay".

Pressing this ENABLE button on "via Linn Streaming" will bring this Linn DS player alive.

When you press ENABLE, this will then allow you to rename this Linn DS, otherwise it will be its default name. E.g. below the "Linn Akurate DSM" - "via Linn Streaming" has been enabled and I have renamed it "Merlin Lounge".

The Linn DS/DSM products have to be declared as "Roon Tested", networked devices in the Roon Core settings. (The "AIRPLAY" option for the Linn DS/DSM must be disabled within the Roon Core).

Click on the Roon Ready - Enable and give a name to the Linn DS/DSM. (In the example below, this has been named Merlin Lounge)

• I press STOP and the Roon starts playing again...

Transport (play / pause / stop) and Volume can be controlled using Kazoo or Ir handset. Although later versions of Roon will counteract these commands. Only use the Roon controller software to control what is playing.

Linn DS Firmware Davaar80 onwards will disable transport controls whilst on the Roon input of the Linn DS/DSM

• If I select an external source whilst playing Roon, I need to reselect the source to get it playing.

This can be due to a confusion, as the Roon will send a stop command to the Linn DSM as you exit the Roon source. However, as the Linn DSM will probably have changed to this new source, then this new source is stopped by Roon. On external sources, this can only be recovered by selecting another source and going back to the originally selected source.

The solution is to Stop or Pause the Roon source BEFORE you change to a different input on the Selekt DSM.

This can also be reduced by going into Konfig or Manage systems and disabling the "AutoPlay" option.

Deezer

Click for more....

This can now be used on Linn products using firmware Davaar82 (July 2021) or later firmware.

To create and add Deezer tracks to a Linn DS/DSM playlist you require the Linn App

This function is NOT available on the Kazoo or Kinsky Apps

The Deezer is broadcast from the Internet straight to the Linn DS/DSM and you use the Linn App to select and play the Music on the Linn DS/DSM.

Check for Deezer FAQ's with Linn DS/DSM

AIRPLAY

Airplay

Click for more....

AirPlay is a Apple protocol that allows wireless streaming media.

The Linn DS/DSM/HUB can take the audio stream via the "Netlink" input.

Check <HERE> for any issues with Airplay

AIRPLAY2

From Linn DS/DSM firmware Davaar 108 (Oct 2024)

Airplay 2

Click for more....

AirPlay2 is an Apple protocol that allows wireless streaming media.

• It is only available Linn DS products with CORE4 , or higher, processors.
  
• The Linn DSM/HUB can take the audio stream via the "NetAux" input.
• Airplay2 allows you to Group multiple Airplay2 devices (including Linn DS HomePod, Apple TV) to play in sync using iOS, Siri, Homekit, iTunes desktop (Windows & MacOS)....
• From Linn DS/DSM firmware Davaar 108 this will no longer allow you to Songcast an Airplay stream to other Linn DS/DSM products. . (Airplay2 supports mixing and matching with other Airplay2 devices and not required to Songcast).

Products supporting Airplay2 from Davaar 108 (October 2024)

▼ Airplay 2

  Klimax DSM /3 (2020 Variant)

  Kustom DSM

  Majik DSM /4 (2020 Variant)

  Selekt DSM /0

  Selekt DSM /0 Classic Hub

  Selekt DSM /1 Classic Hub

  Selekt DSM /1 Edition Hub

  Series 3

FAQ's

What are the differences between a Streamer, Zone and Linn DSM?

Streamer:

is the term for a Media source player. In the case of the Kustom DSM this will play streams from the internet, (Tidal, Qobuz, Internet Radio etc), local Ethernet, (local UPnP Media Server, Songcast from another DS etc..) or from local inputs, (HDMI, TOSLINK, SPDIF, Analogue).

This also provides a Songcast stream to other Linn Streamers/DS/DSM/Hubs.

Zone:

takes a line-level input and performed simple Volume, balance and Standby control to the output(s)

Linn DSM:

Has an inbuilt Streamer and inbuilt Zone to provide you music for listening to.

In a Linn Kustom DSM the Streamer output can be configured to supply to multiple Zones. This sharing the same Music to multiple zones that always want to listen to the same, common, Music source.

Does the Kustom DSM support Surround sound?

No. This is a stereo playback product as there are no Exakt outputs

Does the Kustom DSM support Space Optimisation or Space Optimisation2?

No. Space Optimisation processing is performed within the Streamer. Each zone will have its own Space Optimisation profile but as multiple zones are connected to the same Streamer then multiple profiles cannot be actioned.

Can a Zone on one Streamer share audio to a Zone on another Streamer

Yes. The first Zone Streamer can Songcast to the Streamer feeding the second Zone.

Can I switch on individual Zones in a group without affecting the other Zones in the same group?

Yes, from Linn Davaar firmware 80 (Oct 2020), this will allow you to wake up single zones that will then wake up the group streamer. When all Zones are in Standby then this will put the Streamer into Standby. In Konfig you can disable putting the Streamer into Standby when all grouped Zones are off. This is primarily for Control4 operaiton to stop all grouped zones coming on when all are in Standby. This is called "Auto Standby" in Konfig for the Kazoo Server.

I have Konfigured Streams to Zones using Konfig but I cannot see anything in Kazoo

If you make any Stream/Zone assignment in Konfig the Kustom DSM MUST be REBOOTED before these changes are actioned.

Can I configure the HDMI-ARC socket as an HDMI input?

No, the HDMI socket on the Kustom is hardware configured for HDMI.

If you are using a rack HDMI switch, some have HDMI-ARC outputs or seperate TOSLINK/SPDIF to allow direct local feeds to the Kustom DSM.

You can use HDMI extenders that also support ARC, such as the BLUESTREAM HEX100ARC-KIT-V2, Brightlink 16x16..

If you are using a HDMI switch the other option is a Splitter, such as HDeilty 1x2 spltter with ARC

Where can I use the Linn Kustom DSM?

Example 1:

If you are a Business, e.g. a Restaurant, the Kustom DSM can be used to share the Music but have locally controlled volume controls.

You may have say, have a Kustom DSM Z8 with

5off Zones in different areas of the main floor, assigned to Streamer1

1off Zone - Reception , assigned to Streamer1

1off Zone - Kitchen , assigned to Streamer2

1off Zone - Bar with TV, assigned to Streamer3

Streamer4 unused

This will allow different volume levels in the Main floor and reception, the Kitchen to listen to something else, (such as football) and the Bar to listen to the local TV(via Streamer3 HDMI ARC input), or its own Music playlist.

With Songcast, the music from any Streamer can be shared with any other Linn Streamer or Linn DS/DSM/HUN. This give you Music & flexibility for what you want.

Example 2:

In a apartment with Kustom DSM Z4 and Akurate DSM

Open plan area Kitchen, Breakfast bar & Dining area, seperate rooms: Lounge, Study :

Akurate DSM - Lounge, , with TV, Sat, LP12 local sources

Kustom DSM Zone 1 - Study , assigned to Streamer1

Kustom DSM Zone 2 - Dining, , assigned to Streamer2

Kustom DSM Zone 3 - Kitchen & , assigned to Streamer2 with Kitchen TV and iPad dock sources

Kustom DSM Zone 4 - Breakfast bar , assigned to Streamer2

This will allow the Lounge to watch is own TV, listen to its own Music or Music from another Streamer using Songcast

The Dining, Breakfast bar and Kitchen all share the same source: TV, iPad, Internet Radio, Tidal..... or Music from another Streamer using Songcast

The Study listen to Internet Radio, Tidal..... or Music from another Streamer using Songcast

Each Zone & Linn DSM has their own Volume, Mute & Standby control

Top Of Page Index

Common FAQ's

How do I Update, or recover, the software on a Linn DS/DSM

This procedure is not difficult. The first step is finding out which software/firmware you are using to minimise the steps required.

From Software version Davaar 104, Konfig has retired from providing software update AFTER this software/Davaar version.

Up to > Davaar 98, then use Konfig to update the Linn DS/DSM to the latest software…

From Davaar99+ then you will need to use the Linn App or IR handset (See point1 below)

KONFIG will ONLY update to Davaar 104.

• If you have updated the Linn DS/DSM using Linn App this will be the latest Davaar version. Ignore this Konfig update.
• When you open Konfig this will only show the update as Davaar 104. This may be an earlier version of Davaar than currently installed on your Linn DS/DSM, (probably by Linn App). We recommend that you double check the current Davaar version installed on your Linn DS/DSM before updating using Konfig

To check what version of Software you are running on your Linn DSM, you can either:

1. Use the IR Handset

On the REM 022 use the SHUFFLE key, Press and HOLD this key for 2 seconds

On the REM 020 use the # key, Press and HOLD for 2 seconds,

On older products: early Majik, Akurate, early Klimax and Kiko:

* If this action states, "Your Software is up-to-date" or "Software update available...." then you are running Davaar99 or higher.

* If there is an update available, you will be able to authorise the Linn DS/DSM by pressing the the joystick UP then joystick RIGHT buttons.

* If this states anything else, then you are on Davaar 97 or lower

On newer products: New Majik, Any Selekt DSM & new Klimax DSM:

This will show "Device" on the front panel display. Hit the RIGHT cursor button and this will show you the product information including the software version. (Check point 2, below, on how to decode this version.)

If there is an update available, you will be able to perform this update by following the instructions on the Linn DS/DSM screen.

2: Use Konfig and select your Linn DS/DSM. The Software version is structured as a Software family(4=Davaar) :

Major Release version, (this is the key number to use) : Minor version of software (Ignore this just now)

4:99.491 relates to 4=Davaar, 99=Major software version, 491=Minor version. Therefore, is Davaar-99

Note: Konfig can still be used for these actions, it must still be used as a stepping stone to the latest Linn DS/DSM software.

3. Open Manage Systems and the Firmware is listed on the product configuration page (top right). The Firmware version is decoded in the same manner as the Konfig setup.

Up to Davaar 97

To update, using Konfig and your current Linn DS/DSM firm is Davaar 97 or lower

1.Start Konfig (after ensuring you have latest version)

a) Go into KONFIG Settings and check that Konfig is set to the same network as your Linn DS/DSM.

2. Click on the UPDATES tab. If there is a software update for your Linn DS/DSM it will be listed after clicking UPDATES. If there is no firmware update available for the Linn DS/DSM then it will not be listed under this tab.

Note: on the Selekt DSM & new Majik DSM they will need to be power cycled and wait appox 30minutes before checking the Konfig UPDATES tab

3.Select the UPDATE button against the Linn DS/DSM you want to update.

a) A message will appear on the Konfig screen stating the major changes that this software update may incur. (This will be dependant on your present version of software loaded into the Linn DS/DSM)

b) If you want to continue with this update then scroll down to the bottom of the message and select UPDATE.

c) For your Privacy we ask if you agree to collecting Anonymous data on usage of the Linn DS. This will aid any fault reporting and also any activity to help Linn enhance the software and product operation.

d) Select I AGREE or more options to change what information Linn Products Ltd can receive.

4. Konfig will download the firmware update and proceed to updating the selected Linn DS/DSM player.
5.Once complete you will see an Update Completed Successfully message and your DS player will be re-started
6. Update complete

If you encounter any problems, please contact your Linn Specialist or Contact Linn.

From Davaar 99 onwards

To UPDATE, using Linn App, and your current Linn DS/DSM is Davaar 99 or higher

Linn Ds/DSM software updates using Linn App 1.Click on the icon and if there are any updates for your Linn DS/DSM you will see: 2.Press the > and this will open the product list. As an update is available, STOP ANY MUSIC PLAYING ON YOUR LINN DS/DSM BEFORE pressing the UPDATE button Tap the Update All to initiate the update of all Linn DS/DSM products shown in the list. Please be patient as this can typically take between 5–40 minutes to update depending on the complexity of the update. :

---

To RECOVER, using Linn App, and your current Linn DS/DSM is Davaar 99 or higher

This is only valid for Linn DS/DSM that have already been loaded with Davaar 99, or higher, firmware (from approx April 2023). Otherwise, use the Konfig procedure.

If, for any reason, the update process has failed, (for example, you have left this UPDATE running for 2 hours and the Linn DS appears to be stuck), we would suggest doing the following:

1. Power OFF the Linn DS/DSM

2. Power ON the Linn DS/DSM and press the FALLBACK recessed button on the back of the Linn DS/DSM.

(This sometime has the FB label beside a recessed button near the Linn DS/DSM Ethernet socket.)

This should bring a lightening flash symbol on the Linn DS/DSM display.

3 Now open Linn App, click on the icon, and you should now see the System Recovery option

4:Press the > and this will open the product list of products awaiting a RECOVERY.

if no product is listed, then either the Linn App is on the wrong network or the Linn DS/DSM is NOT running Davaar99 or higher firmware. Use Konfig software to recover this Linn DS/DSM.

5: Press the RECOVER button to start the recovery process of this Linn DS/DSM

The button should now state "Recovering" and this may take several minutes to complete.

6.After a few minutes go back to the HOME page, (ignore the recovering button message as this may not have refreshed itself)

Your Linn DS/DSM has been recovered and reset back to factory default setting. I.e. It will be called "Main Room"

Note: Kustom DSM's will not show as a room(s), but are available to be added to your Linn Account in the next step...

7. Within the Linn App, go into the Settings

a) Click on the Linn Account.

b) click on the Add/Remove products.

c) Scroll down the list of products and search for "Main Room" or Kustom DSM. Double check that the serial number listed matches your Linn DS/DSM serial number and hit the + to add it to your Linn account.

8. Proceed to Manage_Systems to rename and set up your Linn DS/DSM

To update, using an IR handset, and your current Linn DS/DSM is Davaar 99 or higher

Use the IR Handset

On older products, early Majik, Akurate, early Klimax and Kiko,

On the REM 022 use the SHUFFLE key, Press and HOLD this key for 2 seconds

On the REM 020 use the # key, Press and HOLD for 2 seconds,

With older products, early Majik, Akurate, early Klimax and Kiko, If there is a software update it will tell you to press the IR handset UP arrow followed by the RIGHT arrow. The update will now start.

On newer products: New Majik, Any Selekt DSM & new Klimax DSM:

On the IR Handset, or Dial, press the UP joystick key. This will open the setup menu

On the IR Handser, or Dial, press the DOWN joystick key a few times and press the RIGHT joystick key. If there are any software updates on this page it will then give you instructions on how to update the product.

Music formats

What audio formats do the DS players support?

DS products support

• FLAC Up to 192k 24bit
• WAV
• AIFF
• AIFC
• MP3
• AAC
• WMA (lossy)
• OGG VORBIS
• OGG FLAC
• ALAC (Apple Lossless) upto 192K 24bit (If these ALAC files were generated by an early version of dBpowerAmp the Linn DS will not recognise these. Transcode these files to ALAC using the latest version of dBPowerAmp to fix this.)
• DSD - limited to some products in a certain configuration. Check DSD Support for more informaiton

Linn recommends FLAC.

Formats NOT supported

• MQA: Check HERE for more information

• DRM protected files cannot be played on the DS products

Why does Linn recommend FLAC?

1. FLAC is a free open format. It is non-proprietary, which means your music collection is safeguarded for the future, can be played through any open digital music player, and is not tied to a particular manufacturer or product. The specification is published for all to see. In contrast, SACD has failed to achieve significant success because it requires proprietary music content and disc players with proprietary hardware inside.
2. FLAC allows even better than CD quality encoding and decoding. Linn Records provides studio master quality downloads in FLAC, at the same quality as SACD.
3. FLAC supports metadata, or tags, so that useful information about a piece of music can be stored with the music; for example, album, artist, genre, cover art, sleeve notes, etc. User interfaces can make good use of these tags. Two examples of applications that support tag editing are: Mp3tag (Windows) and Tag (Mac)
4. Because it is open and free, there are an extensive set of players, tools, transcoders (to convert between other formats and FLAC), tag editors, and other programs for FLAC.

---

Can the Linn DS/DSM play DSD music?

Products that will play stereo DSD audio:

• Linn DS/DSM players with Katalyst DACs, running firmware from Davaar 60, can play stereo DSD audio files.
  
• All ORGANIK DACs within the Linn DSM can play DSD audio files.
  
• Klimax DSM (2020 variant)
• ANYSelekt DSM variant with Organik, Katalyst or Standard DACs
  

> Only supported on SLOT #1 of the Selekt DSM. Selekt DSM slots 2 & 3 will not play DSD audio.

Some important points on DSD playback on the Linn DS/DSM:

• DSD audio is ONLY available on the analogue outputs
  

DSD audio is NOT supported on:

• Exakt-link to Exakt speakers or Exaktbox. That is, DSD files will NOT play on Exakt speakers or Exaktboxes.
  
• Digital outputs. (TOSLINK, SPDIF)
  
• Songcast to other Linn DS/DSM players

• Supports DSD64 (2.8224MHz) and DSD128 (5.6448MHz) sample rates.
  • DSD256 is only supported on Klimax DSM (2020 variant) and Selekt Edition.

These in the following formats:

• DSF - Sony format that supports ID3 tags
  
• DFF - old Philips mastering format (aka DSDIFF)
  

• DSD is NOT supported on external inputs such as HDMI, Toslink or USB

• No digital signal processing is possible.
  

This means:

• • No balance control is possible to DSD audio file playback.
    
  • No Space Optimisation is applied to DSD audio file playback
    
  • Maximum volume is restricted to 80 (unity gain) on DSD audio file playback. However if you have raised to volume to a higher level e.g. 90, this higher volume is applied to any tracks that are NOT DSD audio files.
    
    

• Linn DS/DSM volume control MUST be enabled
  • If the DSM volume control is disabled you will hear "click"s on the loudspeaker when Play/Pause buttons are pressed or a change in bit-rate on change in tracks

Linn Kazoo Server supports the index and serving of DSD files. Non-indexed DFF files that have no metadata can be browsed by file name using the Kazoo Server Removable drives option.

Asset UPnP server and Minimserver support DSD index and serving to the Linn DS/DSM.

Can I change the audio quality of the Tunein Radio

NO, the Linn DS/DSM.HUB only plays the Radio stream provided by Tunein.

I can no longer get Linn radio stream, Linn Jazz, Linn Classical, Linn Radio, station

From June 2022 TuneIn have removed these Linn Radio streams from their supported list.

These stations are now available using the radio. click <HERE> for more information on how to change your LInn DS/DSM radio to

Does the Linn DS/DSM players play BBC Radio via TuneIn?

Yes, the Linn DS/DSM/HUB will continue to use TuneIn to access and play the BBC radio stations.

From the 30th September 2019 BBC radio made changes to what can access their Radio stations via TuneIn. This is mainly for devices that can support using the BBC Sounds App. The Linn DS products do not support the Sounds App can will continue to have BBC Radio playback rights using Tunein.

Check the BBC Sounds >HELP< section for more information.

How do I add BBC Radio stations to my Presets?

1. Select the TuneIn button in Kazoo /Linn App and find the BBC, or any other Radio station you wish to add in selection tree
2. Press the three dots on the right hand side of the station and enable/disable the Favourite, (TuneIn > Favourite in Linn App).
3. Complete

I cannot get any foreign Radio stations, I can only get UK stations

Due to a legal case between TuneIn and Sony Music, Warner Music. on licences. UK radio stations have licences for UK wecasting. However, non-UK based radio stations were not licensed to webcast music within the UK,

This is a TuneIn issue we are waiting for them to resolve. The alternative is to configure the Linn DS/DSM with airable internet radio

Does the Linn DS/DSM players play MQA?

No, check this link "MQA is bad for Music" for more information

Can the DS player play multi-channel files?

No, the Klimax DS, Akurate DS, Majik DS, Majik DSI, Sneaky Music DS, Sekrit DS, Sneaky DSM, Sekrit DSM and Sekrit DSi are stereo audio only.

Klimax DSM, Selekt DSM, Akurate DSM & Majik DSM can play multi-channel audio from their HDMI inputs if they are using Davaar55 or later software.

Upgrading software

How do I upload new software into the Linn DS/DSM

1. First of all you need a PC or MAC and install the KONFIG app.
   
2. After you have installed KONFIG go to the ADVANCED tab. If your Linn DS/DSM requires an update it will be listed here.
3. If an update is available for that Linn DS/DSM then press the UPDATE' button

More detailed instructions are listed HERE

Physical Input/Outputs

How do I add Music to play on Linn DS

If your Music is on a CD then this must be RIPPED from the CD first.

This can be using a PC or MAC with CD-ROM drive or from a Network attached Storage device/NAS with inbuilt ripper.

If you are using a PC or MAC you can use software listed HERE

The "Ripped" Music can be held on the PC/MAC of on a Network attached Storage device/NAS. The NAS is the better option as this is a low power device that can be left on all of the time.

The PC/MAC/NAS requires UPnP Media Server software to share the Music for the Linn DS/DSM to play.

Will downloaded music play on the DS players?

Yes, so long as it is not protected by Digital Rights Managemant (DRM) restrictions and is in one of the supported formats, or transcoded to such a format.

Can I Airplay from my Android device?

The newer products with Bluetooth allow Android devices to play on a Bluetooth device, that is, the Linn DSM.

▼ Bluetooth   Klimax DSM /3 (2020 Variant)   Majik DSM /4 (2020 Variant)   Selekt DSM /0   Selekt DSM /0 Classic Hub   Selekt DSM /1 Classic Hub   Selekt DSM /1 Edition Hub   Series 3

Otherwise without ROOTING, the android device there is no way to stream to the Linn DS (Airplay AOA Service).

All other apps take the media file and stream it via UPnP.

Streaming local files can be done use Skifta and “Double Twist Player”

Media Applications

After Updating to Davaar55 I can only get audio from my Exakt outputs and not the Analogue Out

Check Konfig > Device > "Dual Analogue/Exakt Stereo Output" has been enabled.

If you have declared your Exakt speakers as 'Front Left'/'Front Right' and the analogue outputs to be 'Front Left'/'Front Right' (Stereo). ensure that this option in Konfig is enabled. The audio in the Exakt outputs will be out of sync by approx 45mS compared to the analogue outputs.

Are the Digital outputs (Toslink/SPDIF) volume controlled?

This depends on the Digital Output mode. On some products, the SPDIF Input can be changed to an output and configured for Post EQ

The Digital outputs will always produce the front Left & Right of the audio source that is playing on the Analogue or Exakt outputs.

Can I add digital loudspeakers to the Linn DS/DSM?

This depends on the Digital Output mode. On some products, the SPDIF Input can be changed to an output and configured for Post EQ

General Q's

Can I stop the kids from playing with the front panel buttons?

Yes on of the Majik & Akurate DS/DSM/HUB. If you go into Konfig > Display settings you can define "Front Panel buttons" to be OFF. This will stop the front panel buttons from doing anything. You can still control the Linn DS/DSM by IR handset and the Kazoo App.

(Just remember if you have disabled the front panel buttons and think that the Linn DS/DSM is broken!)

How do I achieve gapless playback for live albums?

To guarantee gapless playback, you will need to rip your music tracks into a lossless format (i.e. FLAC). You must also ensure that you are using ripping software that does not add gaps between tracks when ripping (i.e. DBPoweramp). Most ripping software will offer the option to turn this feature off.

Also make that that you have selected the PLAYLIST input and NOT the UPnPAV input

Linn PINS

What is a PIN, check HERE for more detailed information.

PIN FAQs:

• We currently support pinning from Kazoo Server (V4.9.8 onwards) , Tidal, Qobuz, TuneIn, CalmRadio, DS radio presets, and Linn DSM external inputs

• This is only applicable with Linn DS/DSM players with Davaar 64 or higher firmware

• This currently does NOT support Pins to external pre-amplifier inputs, such as Akurate Kontrol, Kisto etc.

• PINs use discrete IR codes and are not used with any other Linn Product control.

• PINS for Radio stations are wrongly created with Kazoo V4.13.21, this has been fixed with next version 4.13.22. If you have created a Radio station PIN and it doesn't work, check you have a later version of Kazoo and re-assign this PIN to the correct radio station.

Deezer on the Linn DS/DSM

This can now be used on Linn products using firmware Davaar82 (July 2021) or later firmware.

To create and add Deezer tracks to a Linn DS/DSM playlist you require the Linn App

This function is NOT available on the Kazoo or Kinsky Apps

The Deezer is broadcast from the Internet straight to the Linn DS/DSM and you use the Linn App to select and play the Music on the Linn DS/DSM.

Check for Deezer FAQ's with Linn DS/DSM

Linn Songcast

Songcast is the method of transport for streaming STEREO audio data between a Songcast sender, (Linn DS/DSM, Songcast App), and Songcast receivers, (other Linn DS/DSM players listening to that sender DS - multiroom operation.)

The Songcast stream contains the raw unprocessed music stream, the metadata information for the Music playing and timing information.

• The raw music data is the same data as received by the sending Linn DS. This maintains the same music stream is processed by ALL Linn DS players, (sender and receivers).
  
  • As this Songcast music stream is untouched this leaves the receiving Linn DS/DSM to do its own volume control.
  • Volume, Space Optimisation and Exakt processing, if used, are all performed as a final process to minimise any digital processing.

• The timing information is used to ensure that the Linn DS/DSM players are in sync with the music sender.
  

There is a ! on the front panel of my Linn DS/DSM

There is a speaker setup issue on the Linn DS/DSM Surround Sound Rules

The front panel of the DS is showing a flashing dot or lightening flash and I cannot see the Linn DS with Kazoo or Konfig

This is the Linn DS either in "startup" mode or in "Waiting for Software" mode.

"Startup": The flashing dot is the startup mode trying to connect to you ethernet network. This mode will typically occur when you first apply power to the Linn DS/DSM. This will typically take 30seconds and go into standard use mode.

"Waiting for Software": The lightening flash is the Linn DS/DSM waiting or getting a software update.

If you have any problems getting the Linn DS on an Ethernet network, (dot continuously flashing), try the following options:- Option1

• Power off the EVERYTHING connected to the Ethernet system, (PC, Printers, DS, Routers/DHCP servers).
• Leave everything powered off for at least 10seconds.
• Switch everything back on.
• Retry the system

You will find that some of the devices in the system get confused and cause system confusion. The power cycling will do a reset of the system and recover most issues.

Option2

• Use fresh Ethernet cables, (replace existing cables).
• If the Linn Ds is more than 3M (10ft) from the DHCP/Server. Move the Linn DS right beside the Router/DHCP server and patch using a short Ethernet cable (1M), the Linn DS to the DHCP server/Router
• Retry the system

Option3

• Build a totally separate system with only a DHCP/Server and Linn DS.
• Retry the system

Some networks only have a limited number of DHCP address’s. if you have already connected some PC’s to this system, your Router/DHCP server can remember these devices, (even though no longer connected) and will not allocated these previously assigned IP addresses to newly connected products. So the case of unplugging one device to free up an IP address for the DS to use will NOT work with most Routers/DHCP servers if there are no free DHCP IP addresses available.

This will give a better idea as to what is causing the problem. (98% of the time, this is due to a local network issue).

If you always get the flashing dot then the lightening flash symbol then the Linn DS/DSM needs to be programmed. Check the Konfig Manual > Updates section or contact your Linn Retailer to get assistance.

FAQ on ALL products link

Click HERE for FAQ on ALL products

Top Of Page Index

Troubleshooting

For information on: troubleshooting, Surround options, "Ripping" Cd's , Exakt system then this next section will provide the information that you need:

General points / Troubleshooting All DS troubleshooting Linn Songcast Exakt systems HDMI Issues.. (ARC, no Audio, no picture..) UPnP Media Server issue.. General Product FAQ Non-Linn software Some download Music sites	General Media and Apps Ripping Media Applications
	Surround Sound Original Surround capability Current Product Surround capability Linn Surround Module

---

Technical Specifications

Top Of Page Index

Kustom DSM
Overview	Product Name: Kustom DSM Date of Introduction: December 2019 Type: Multi-zone Network music player ⊕ Versions: Z4 - 2 Streamers with 4 zones Z8 - 4 Streamers with 8 zones
Dimensions	(H) 44 mm x (W) 450 mm x (D) 280 mm (1U height) (H) 1.73 inches x (W) 17.72 inches x (D) 11 inches Additional 6.5mm / 0.25inches in height when feet are added
Weight	2.45 kg / 5.4 lb
Mains supply voltage	(auto ranging) 100–120 V ac (±10%) 50–60 Hz 200–240 V ac (±10%) 50–60 Hz
Power consumption	25 W
Supported file types	FLAC, WAV, MP3, AAC, AIFF/AIFC, ALAC, OGG/VORBIS, WMA (Except lossless)
Audio sample rates	Up to 192 k
Word depths	16–24 bits
Control protocol	Compatible with UPnP™ media servers, limited functionality with UPnP™ AV 1.0 control points
Network	1off Ethernet 1GBASE-T RJ45 Internal switch feeds each Streamer (Z4 - 2off, Z8 - 4off). Each Streamer has its own MAC address and IP address
EXAKT	Not Supported
ONE Streamer input Each Streamer (Z4-2off & Z8-4off) each have the following dedicated inputs	Stream Sources Songcast (other Linn DS/DSM/HUB) LAN (UPnP Media Server) Internet radio Tidal Qobuz Calm Radio Spotify Connect NetAux Roon External sources (Dedicated to each Streamer) 1off HDMI ARC (2ch-PCM only) 1pr Stereo RCA/Phono Line level, Input sensitivity: 2 Vrms Input impedance - 10 kΩ 1off Stereo Toslink Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz 1off Stereo SPDIF Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz Nominal input voltage 0.5 V peak Input impedance - 75 Ω
Zone outputs (These are configured in Konfig to be fixed to a Streamer. These CANNOT be moved to another Stream in normal operation)	1pr Stereo RCA/Phono Line level, Output voltage: 2 V RMS (0 dBFS vol. 80) Output impedance - 300 Ω

Top Of Page Index