Difference between revisions of "Info:Series3-Mono-Stereo"
(Created page with ":The <b>Series3-301</b> can be configured for <b><u>Mono</u></b> playback. (This is when left and right hand channel audio is mixed together to give one speaker)<br> :Or conne...") |
m |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | :The <b>Series3-301</b> can be configured for <b><u> | + | :The <b>Series3-301</b> can be configured for <b><u>Single</u></b> playback. (This is when left and right hand channel audio is mixed together to give one speaker)<br> |
:Or connect a <b>Series3-302 partner speaker</b> for <b><u>Stereo</u></b> playback. (One speaker for Left hand channel and one speaker for Right hand channel) | :Or connect a <b>Series3-302 partner speaker</b> for <b><u>Stereo</u></b> playback. (One speaker for Left hand channel and one speaker for Right hand channel) | ||
| − | The <b>Series3-302 partner speaker</b> requires its own mains power cable and a CAT-5 <u>[[Exakt_link|Exakt-link]] cable to hook up to the <b>Series3-301</b> | + | :The <b>Series3-302 partner speaker</b> requires its own mains power cable and a CAT-5 <u>[[Exakt_link|Exakt-link]]</u> cable to hook up to the <b>Series3-301</b> |
| + | Example: | ||
| + | [[image: Series3-wiring-2sp-LAN-ARC.png|600px|centre]] | ||
| − | + | Configure for use with <b>Series3-302 partner</b> speaker | |
| + | {{Setup:Series3-Self_Configure}} | ||
| + | |||
| + | :Check <u>[[Series_3_Setup#Wiring|Setup > Wiring]]</u> for more example | ||
Latest revision as of 08:50, 25 October 2019
- The Series3-301 can be configured for Single playback. (This is when left and right hand channel audio is mixed together to give one speaker)
- Or connect a Series3-302 partner speaker for Stereo playback. (One speaker for Left hand channel and one speaker for Right hand channel)
- The Series3-302 partner speaker requires its own mains power cable and a CAT-5 Exakt-link cable to hook up to the Series3-301
Example:
Configure for use with Series3-302 partner speaker
|
Add/Remove a Partner speaker setup procedure
(This will change the Series3-301 from MONO to STEREO and use the Series3-302 as the other STEREO channel) : | |
| 1. Connect or remove the Series3-302 speaker as required: | ||
| * Stereo mode:Connect the Series3-302 using an Exakt-link cable to the Series3-302 | ||
| * Single (mono) mode: Disconnect the Series3-302 Exakt-link from the Series3-302 | ||
2. Press and HOLD both buttons  &  on the Series3-301 until half of the Volume indicator lights illuminate
| ||
| 3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display. |
The On-line setup guide can be found https://www.linn.co.uk/setup
- Check Setup > Wiring for more example
