DS Entry Level System

Introduction

This is a recommended guide to setting up an entry level Linn DS system, requiring you to purchase some network components in order to build the recommended system.

It is advisable to follow the instructions step by step to ensure that each part of the system is working before moving on to the next. By doing this, it simplifies the setup process and allows for any problems encountered to be more easily identified and resolved.

Required Components

The following components are required for the system detailed in this page:

• Router
• Computer
• Linn DS
• NAS

Notes:

1. Ethernet cables are required to connect devices
2. Router is required to have built in network switch and feature address reservation
3. NAS is required to have media server software and backup support
4. If a wireless router is being used, 'N' band WAP support is recommended

Step 1: Connect Computer To Router

1. Connect the computer to the router
2. Power on the Router
3. Power on the computer
4. Configure the router to the recommended settings

The computer’s network adapter should already be configured to ‘obtain an IP address automatically’.

Step 2: Connect NAS To Router

1. Connect the NAS to the router
2. Power on the NAS

Step 3: Connect Linn DS To Router

1. Connect the Linn DS to the router
2. Power on the Linn DS.

Step 4: Install Linn DS Control Software On Computer

1. Download Kinsky Desktop from here
2. Install Kinsky Desktop onto the computer
3. View the Kinsky Desktop manual here

Links to Other Systems

DS Budget System

DS High End System