Akurate ExaktBox 6-10/0 (2014 variant)

Akurate Exaktbox (2018 variant) >>

AKURATE EXAKTBOX 6 or 10
(Original version)

Product info

• Product Name:

Akurate ExaktBox (10-channel)

Akurate ExaktBox ( 6-channel)

• Date of Introduction:

September 2014 (10-channel)

September 2015 ( 6-channel)

Replaced by Akurate Exaktbox 6 or 10 /1 in 2018

• Type: Digital Crossover with Exakt Technology

Supports

Stereo speakers from 2way to 3way (6-channel) or 2-way to 5-way (10-channel) or

Mono speakers from 2way to 6way (6 & 10 channel)

Software upgradable to support more and more loudspeakers

Connects to power amplifiers and externally Active/Exakt speakers

• It can only be used with Exakt-Link output products

• Features
  • Dynamik Power Supply
  • EXAKT
  • Surround Sound

Hardware Upgrades

UTOPIK Power Supply upgrade: Improved power supply

Note: It should be noted that this upgrade information may at times be out of date and should not be used as a current list of what upgrades are available.

Support

Linn Support Site

Installation

As this is an Exaktbox the initial setup must be performed with a Local Area Network that has Internet access. Otherwise Manage Systems cannot set the speaker channel, Speaker profile and Space Optimisation of these products

Latest software

Latest software releases

Open source software

Manuals

Manage Systems setup manual

Space Optimisation (Advanced)

Surround Sound with Exakt systems

Safety Information

Warranty Terms and Conditions

Third Party Software Copyright

FAQ's

Check FAQ-AkurateBox DSM

Back Panel Connections

1. MAINS INPUT - To connect to the mains electricity supply.
2. EXAKT LINK- To connect to Exakt compatible devices (CAT-5 cables)
3. ANALOGUE OUTPUTS (XLR,variable level) - To connect to power amplifiers with balanced (XLR) analogue inputs. (300ohm Output impedance)
4. ANALOGUE OUTPUTS (RCA, variable level) - To connect to power amplifier with unbalanced (RCA) analogue inputs. (300ohm Output impedance)
5. FALLBACK - Primarily for Linn service use only, to put the device into Fallback mode (used when reprogramming the unit).

Note: Both XLR and RCA outputs are active simulatneously.

EXAKT LINK Connections

Example if you are using a Akurate DSM/1 to connect to an Akurate ExaktBox:

The Exakt-link cable can supply digital audio for multiple speakers.
Use Manage Systems Setup pages to declare if Channel1 is left or right hand channel and Channel2 is left or right hand channel

Check HERE for more information of Exakt link connection

Power Amplifier/Speaker connections

DOUBLE CHECK the wiring from the Exaktbox to power amplifier to speaker terminals!
If there are any mis-wires or wrong speaker definitions in the Exaktbox, you may blow the speaker drive units, so take care.

If this is the first connection, use the standard Active test scenario.

1. Switch off ALL power amplifiers.
2. Disconnect any power amplifier to speakers connections
3. Set to a low-volume value, e.g 40-50
4. Do the following tests 5,6,7,8 starting with the Bass connections, then Midrange, then tweeter and finally super tweeter in that order.
5. Connect the respective (Bass or Mid or tweeter ot super-tweeter) power amplifier connection to the Bass connection (Bass or Mid or tweeter ot super-tweeter) of the speaker.
6. Switch on the respective amplifier and play some Music. Check that you are only getting (Bass or Mid or tweeter ot super-tweeter) audio from that speaker drive unit.
7. Stop the Music playing.
8. Leave this cable connected, go to Step4 and connect the next speaker drive unit in the list.

If you change speaker or variant, this may also change the Exaktbox terminations, so DOUBLE CHECK

To see the Exaktbox terminations for each speaker, click here

EXAKT LED Status

LED	OFF	ON	Flash / Blink
0 Master Port	No Link	Link Discovered	Link Activity
1 Audio Clock	No Clock	Clock locked	Clock not locked
2 Slave Port	No Link	Link Enabled	Link Activity
3 Software Status	Not Configured	Running	Hardware Fault

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

• Unpacking Information

• Positioning Information

• The ExaktBox is shipped from Linn with no speaker setup and must be configured with Manage Systems.

Exakt options

Exakt usage can be found in Klimax_Exakt_System

One of the beneifts of the Exakt system is that you can easily setup and optimise your listening environment. Simply use Manage Systems and follow the Space_Optimsation+ & Space Optimisation+ (Advanced)

Supported speakers

When used in this mode any spare outputs CANNOT be used for the either 6 or 8 channel passthrough Surround mode

Select CONNECTION HELP for up to date wiring information

Check www.Linn.co.uk Exakt speakers

Examples using Akurate Exaktbox
Note: It should be noted that information may at times be out of date and should not be used as a current list of what is supported. check www.Linn.co.uk

Linn speakers

These speakers must be made externally Aktiv
Note: Speakers that cannot be made externally Aktiv e.g Av5110, UNIK, Diskreet etc cannot be used with the Exaktbox

• Klimax 350(Externally Aktiv 350's will need to be converted for use with the Exaktbox operation)
• Komri
• Keltik

Standard production mid-range 007 & tweeter 015

Mid-range 081 & tweeter 038 were used for repair or upgrade

• Akubarik passive made Aktiv
• Akudorik passive speakers made Aktiv
• Akurate 242 Mk1 & Mk2
• Akurate 212 Mk1 & Mk2
• Akurate 225 - Centre - Akurate Exaktbox6

• Majik Isobarik
• Majik 140
• Majik 112 - Akurate Exaktbox6
• Majik 109
• Komponent 104
• Komponent 106
• Komponent 110

• Custom2K 104
• Custom2K 106
• Sekrit IW10

• Ninka speakers- bi-amped or Tri-amped
• Keilidh- Bi-Amped & Tri-Amped (t1-Tweeter 15, T2-Tweeter 038)
• AV5140

Standard production tweeter 015, Tweeter 038 were used for repair or upgrade

• AV5120-Centre - Akurate Exaktbox6
• Espek
• Ekwal-Centre - Akurate Exaktbox6
• Kaber
• Katan
• Trikan - Centre - Akurate Exaktbox6
• (original) Isobarik
• Sekrit IW10

Unused Channels CANNOT be used for another loudspeaker or purpose.

non-Linn speakers

Examples using Akurate Exaktbox
Note: It should be noted that information may at times be out of date and should not be used as a current list of what is supported. check www.Linn.co.uk

1. B&W Nautilus
2. B&W 802 Diamond
3. KUDOS Super10
4. KUDOS Super20
5. KUDOS Titan 505
6. KUDOS Titan 606
7. KUDOS Titan 707
8. KUDOS Titan 808
9. JBL K2 S9900
10. Twenty.26
11. KEF Reference 3
12. KEF Reference 5

Example of use

ExaktBox Surround Channel selection

Speakers can be driven from any combination of: Direct analogue output from the DSM Exakt Speaker Exaktbox configured with crossovers for one or two speakers Exaktbox configured for surround playback Speaker type set for 6 x Channel Passthrough for 5.1ch or 8 x Channel Passthrough or 7.1ch Linn Selekt DSM cartridge(s) Examples of speaker setups can be found HERE You cannot assign mulitple Subwoofer types in the same Exaktbox. that is, You can ONLY be assign one or more LFE (Surround playback only) or one or more MONO Subwoofer (Stereo Playback only) or one or more LEFT Subwoofer (Stereo Playback only) or one or more RIGHT Subwoofer (Stereo Playback only) E.g. But NOT a LFE AND MONO on the same Exaktbox

above is an Exaktbox configured for "6 channel passthrough" In "6 or 8 channel passthrough" Exaktbox filter selection then this Exaktbox CANNOT be used for "digital crossover" speakers as well.

Trouble shooting

Check Exakt trouble shooting

For further assistance, try our customer support pages.