Difference between revisions of "Selekt:Exakt crossover for Aktiv 2/3-way"
m |
m |
||
| Line 15: | Line 15: | ||
[[Image:LAMS-Selekt-Aktiv-Connections.png|right|500px|link=]] | [[Image:LAMS-Selekt-Aktiv-Connections.png|right|500px|link=]] | ||
Notes: | Notes: | ||
| − | :* The loudspeakers MUST be configured for | + | :* The loudspeakers MUST be configured for Exakt operation. |
:* Check the Manage Systems - General for the connection information, > | :* Check the Manage Systems - General for the connection information, > | ||
:* This will work with both <u>[[#SELEKT_DSM_CARTRIDGE_-_2Ch_LINE_OUT|Line Level]]</u> and <u>[[#SELEKT_DSM_CARTRIDGE_-_POWER_OUT|Power Amplifier]]</u> Selekt cartridges.(Check the cartridge notes on mixing both types of cartridges in the same Selekt DSM) | :* This will work with both <u>[[#SELEKT_DSM_CARTRIDGE_-_2Ch_LINE_OUT|Line Level]]</u> and <u>[[#SELEKT_DSM_CARTRIDGE_-_POWER_OUT|Power Amplifier]]</u> Selekt cartridges.(Check the cartridge notes on mixing both types of cartridges in the same Selekt DSM) | ||
Revision as of 08:27, 16 August 2024
- The Selekt DSM has Stereo 3-Way Exakt Engine. This allows you to use the Selekt DSM as 2-way or 3-way Exakt Crossover
- In Linn Account Manage systems go into the GENERAL tab and open the "Network Player" page. Finally go to Change Configuration and select the required loudspeaker;
- These are examples of wiring a Exakt Crossover system in different Amplifier configurations:
- Each Selekt power amplifier output drive each loudspeaker drive unit seperately.
- The loudspeaker must be made Externally Aktiv and any shorting links/bridging strip across the loudspeaker back panel MUST be removed according to the amplifier/speaker wiring. Please refer to a Linn Retailer to ensure that this is done correctly
Notes:
- The loudspeakers MUST be configured for Exakt operation.
- Check the Manage Systems - General for the connection information, >
- This will work with both Line Level and Power Amplifier Selekt cartridges.(Check the cartridge notes on mixing both types of cartridges in the same Selekt DSM)
- No HDMI Switching module is required for this setup.
- Do NOT mix Selekt power amplifier cartridges and Selekt Line-Level cartridges for Bi-Amp/Tri-Amp/Quad-Amp... system This is due to the Selekt power amplifier having a lower gain than other Linn amplifier. Therefore the feeds to loudspeaker inputs from the Selekt power amplifier and external power amplifier will be mis-matched in volume.
