Difference between revisions of "Template:Setup:Selekt Edition Sub"
m |
m |
||
| Line 3: | Line 3: | ||
::Examples | ::Examples | ||
| − | [[image:Edition with Stereo SubOut.png |400px]]- [[image:Edition with Mono- | + | [[image:Edition with Stereo SubOut.png |400px]]- [[image:Edition with Mono-SubOut1.png|400px|top]] |
;In Konfig - subwoofer options | ;In Konfig - subwoofer options | ||
Revision as of 12:11, 3 May 2023
- These outputs are to give Stereo music enhancement on the Selekt DSM Edition.
- Examples
- 
- In Konfig - subwoofer options
| Filter | |||
| ON | SUBOUT set by crossover frequency 60Hz, 80Hz, 120Hz . | ||
| Disable | SUBOUT crossover frequency 1kHz, the LHC/RHC audio is flat. |
| Crossover frequency |
| 60: | Crossover frequency 60Hz | ||
| 80 | Crossover frequency 80Hz | ||
| 120 | Crossover frequency 120Hz |
| Type | In both case below, the audio below the crossover frequency is sent to the sub outs, | ||
| Bass redirect: | Audio above that frequency is sent to the cartridge and Exakt speakers | ||
| Bass Reinforcement | Audio to the cartdiges and Exakt speakers is flat. |
- In both case below, the audio below the crossover frequency is sent to the sub outs
| Channels | , | ||
| Mono: | Mono for a single Subwoofer | ||
| Stereo | For two Subwoofers |
- Notes
-
- Only works with Stereo playback
- Does NOT work with DSD playback
