Difference between revisions of "Akurate DS (2010 Variant)"

From LinnDocs
Jump to: navigation, search
m (Network Setup)
m (Product info)
Line 3: Line 3:
 
== '''Product info''' ==
 
== '''Product info''' ==
  
* ''Product Name:'' Akurate DS/1
+
* ''Product Name:'' Akurate DS/1 (Variant 2010)
  
* ''Date of Introduction:'' November 2010
+
* ''Date of Introduction:'' November 2010 - April 2015
 +
: Replaced by [[Akurate DS (Exakt Variant) | Akurate DS/2]] in 2015
  
 
* ''Type:'' Digital music player
 
* ''Type:'' Digital music player

Revision as of 11:23, 20 November 2018

AkurateDSMk2FrontTop.jpg

Product info

  • Product Name: Akurate DS/1 (Variant 2010)
  • Date of Introduction: November 2010 - April 2015
Replaced by Akurate DS/2 in 2015
  • Type: Digital music player

Support

Linn Support Site

Latest software

Latest software releases

Open source software

Manuals

Quickstart Guide

Controlling the product User Guide

Product setup:Manage Systems user manual

Space Optimisation (Advanced)

Safety Information

Warranty Terms and Conditions

Third Party Software Copyright

FAQ's

Check FAQ-Linn DS/DSM

Network Setup

DS Budget System Setup

DS Entry Level System Setup

DS High End System Setup

Back Panel Connections

AkurateDSMk2Back.png


  1. MAINS INPUT - To connect to the mains electricity supply.
  2. EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
  3. ETHERNET - To connect to a network.
  4. FALLBACK - To put the device into Fallback mode (used when reprogramming)
  5. RS232 PORTS - To connect to Linn devices that don't have ethernet.
  6. DIGITAL OUTPUT - To connect to an external DAC or computer that has an Spdif input.
  7. BALANCED AUDIO OUTPUTS - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.
  8. UNBALANCED AUDIO OUTPUTS - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.

Front Panel Connections

AkurateDSMk2Front.png
  1. SOURCE SELECT BUTTON - Changes to the next source
  2. SKIP TRACK BUTTONS - Skips to the previous/next track
  3. STOP BUTTON - Stops playing the current track
  4. PLAY BUTTON - Starts playing the current track
  5. STANDBY BUTTON - Brings the product in/out of standby
  6. POWER SWITCH - Switches the power on/off
  7. FRONT PANEL DISPLAY

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.


For further assistance, try our customer support pages