View source for Template:LinnApp:System Recovery

<noinclude>=Linn App:Device Recovery=</noinclude> 
<noinclude>__NOINDEX__</noinclude>
;Video instructions
::::{{#ev:youtube|a7mPGwbQvB4}}

;Written instructions
<b>This is only valid for Linn DS/DSM that have already been loaded with <u>Davaar 99</u>, or higher, firmware (from approx April 2023).</b>
:If, for any reason, the update process has failed, (for example, you have left this UPDATE running for 1-2 hours and the Linn DS appears to be stuck), we would suggest doing the following:

:1. Power OFF the Linn DS/DSM and disconnect any EXAKT speakers or Exaktboxes
[[File:Fallback_Akurate.png|right|link=|350px]]

:2. Power ON the Linn DS/DSM and press the <u>[[FALLBACK]]</u> recessed button on the back of the Linn DS/DSM. 
::(This sometime has the <b><big>FB</big></b> label  beside a recessed button near the Linn DS/DSM Ethernet socket.) 
::This should bring a lightening flash symbol on the Linn DS/DSM display.
<br>
[[File:Linn App-Update and Recovery.png|right|350px |  ]]
<br>
:3 Open the Linn App, click on the [[File:LinnAppMoreButton.png|80px|link=]] icon, this will proceed to the Recovery page 
<br>
:4:Press the <b><big><big>></big></big></b> icon and this will open the product list of products awaiting a RECOVERY. 
<br>
::<b> if there is no "System Recovery" option, then either the Linn App is on the wrong network or the Linn DS/DSM is <B><u>NOT</u></B> running Davaar99 or higher firmware. Use <u>[[Konfig]]</u> software to recover this Linn DS/DSM.</b>
<br><br><br><br>
[[File:Linn_App-System_Recover.png|right|350px | ]]
<br><br><br>
:5: Press the <B>RECOVER</b> button to start the recovery process of this Linn DS/DSM
::The button should now state "Recovering" and this may take between 5-60 minutes to complete.
<br><br><br><br><br><br>
:6. After a few minutes, go back to the HOME page, (ignore the recovering button message as this may not have refreshed itself)
::Your Linn DS/DSM has been recovered and may have been reset back to its factory default setting. I.e. It will be called the "Main Room"
::Note: Kustom DSM's will not show as a room(s), but are available to be added to your Linn Account in the next step...<br>
:7. Within the Linn App, go into the Settings
::a) Click on the Linn Account.
::b) click on the <b>Add/Remove products.</b>
::c) Scroll down the list of products and search for "Main Room" or Kustom DSM. Double check that the serial number listed matches your Linn DS/DSM serial number and hit the <B><BIG>+</big></b> to add it to your Linn account.<br>
:8. Reconnect any Exakt speakers or Exaktboxes if you had disconnected then in step 1.
:9. Proceed to <u>[[Manage_Systems]]</u> to rename and set up your Linn DS/DSM