View source for Majik-I

[[Image:Majik-I silver 3Qright RGB 72dpi.jpg|right|435x143px]]

DRAFT

== '''Product info''' ==

* ''Product Name:'' Majik-I

* ''Date of Introduction:'' October 2007 

* ''Type:'' Integrated preamplifier and power amplifier

* ''Features'' 
** [http://www.linn.co.uk/buying#technology Chakra Power]
** [http://www.linn.co.uk/why_dynamik Dynamik Power Supply]
** [http://docs.linn.co.uk/wiki/index.php/Aktiv Aktiv Operation]
** [http://docs.linn.co.uk/wiki/index.php/Unity_Gain Source Unity Gain option]


== '''Manuals''' ==

[http://docs.linn.co.uk/wiki/index.php/REM_020 Remote Control manual]

[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]

[http://www.linn.co.uk/warranty Warranty Terms & Conditions]


== '''Back Panel Connections''' ==

[[Image:Majik-I rear.jpg|center|747x245px|Image:Majik_DS-I_rear.jpg]] <br>

# '''MAINS INPUT''' - To connect to the mains electricity supply.
# '''SPEAKER OUTPUTS''' - To connect to loudspeakers
# '''ANALOGUE OUTPUTS''' (RCA, variable level) - To connect to a preamplifier with unbalanced (RCA) inputs.
# '''ANALOGUE OUTPUTS''' (RCA, fixed level) - To connect to an analogue recording device with unbalanced (RCA) inputs.
# '''ANALOGUE INPUTS''' (RCA, line level) - To connect sources with unbalanced (RCA) analogue outputs. Input 6 is a configurable input, which is factory set as a moving magnet phono input for connection to turntables. It can be changed by a Linn dealer to a line-level input or a moving coil phono input (moving coil is an optional upgrade).
# '''EARTH GROUND''' -  To connect to a turntable grounding terminal, or an earthing terminal if no mains earth is available, or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
# '''RS232 PORTS''' - For connection to Linn source products without ethernet ports.

<br>

== '''Front Panel Connections''' ==

[[Image:Majik-I front.jpg|center|800x300px]]

# '''MUTE BUTTON''' - Mutes/unmutes the audio
# '''FRONT PANEL DISPLAY'''
# '''STANDBY BUTTON''' - Brings the unit in/out of standby
# '''VOLUME ADJUST BUTTONS''' - Changes the volume up/down
# '''HEADPHONE OUTPUT''' (3.5mm stereo) -  To connect to headphones
# '''AUXILIARY SOURCE INPUT''' (3.5mm stereo) - To connect to an analogue stereo audio source
# '''SOURCE ADJUST BUTTONS''' - Changes to the previous/next source

<br>

== '''Installation''' ==

Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]

* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]

* [http://docs.linn.co.uk/wiki/index.php/amplifier_protection  Amplifier Protection]

* [http://docs.linn.co.uk/wiki/index.php/Integrated_Phono_Stage Configurable Phono Stage] 


For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]

== '''Setup Menus''' ==
The setup menus can be used to configure the Majik-I to customise aspects of its operation to suit your requirements, to operate in a particular type of installation, or
to view important functional data.  

'''Entering and Navigating setup'''
Using the Front Panel
* Press and Hold the '''MUTE''' button until "main Menu" appears on the front panel display.
* Navigate up or down the options within a menu using '''SOURCE+''' or '''SOURCE-'''
* Press '''VOLUME+''' or '''STANDBY''' to select an option.
* Press '''VOLUME-''' to go back to the previous option or menu.
* Press '''MUTE''' to exit Setup.

'''NOTE:''' For each option the currently selected setting will be indicated by a tick beside it.

The Main Menu Menu consists of four sub Menus:
* [http://docs.linn.co.uk/wiki/index.php/Majik-I_Display_Configuration Display Configuration]
* [http://docs.linn.co.uk/wiki/index.php/Majik-I_Source_Configuration Source Configuration]
* [http://docs.linn.co.uk/wiki/index.php/Majik-I_Audio_Configuration Audio Configuration]
* [http://docs.linn.co.uk/wiki/index.php/Majik-I_Unit_Configuration Unit Configuration]