View source for Sneaky Music DS

[[Image:SneakyMusicDS Silv 3QRight RGB 72DPI.jpg|right|404x174px]]

== '''Product info''' ==

* ''Product Name:'' Sneaky Music DS

* ''Date of Introduction:'' March 2008

* ''Type:'' Network Music Player.

* ''Features'' 
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]

== '''Latest software''' ==

[http://www.linn.co.uk/ds_software Latest software releases]

[http://oss.linn.co.uk/trac Open source software]

== '''Manuals''' ==

[http://docs.linn.co.uk/wiki/index.php/Linn_Konfig_Manual Linn Konfig manual]

[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]

[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]

[http://www.linn.co.uk/files/ccf1286d/Sneaky_Music_DS_Product_Information.pdf Production Information Sheet, including Product Specifications]

[http://www.linn.co.uk/files/07354a05/Pack_1387_Generic_Safety_Info.pdf Generic Safety Information]

[http://www.linn.co.uk/warranty On-line warranty registration]

== '''System Setup''' ==

[http://docs.linn.co.uk/wiki/index.php/DS_Network_Setup Recommended DS Network setup guide]

<br>

== '''Back Panel Connections''' ==

[[Image:Sneaky DS rear.jpg|center|720x230px|Image:Sneaky_DS_rear.jpg]]

# '''MAINS INPUT''' - For connection to the mains supply.
# '''EARTH GROUND''' - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
# '''SPEAKER OUTPUTS RIGHT, LEFT''' - Amplified output for connection to loudspeakers
# '''ANALOGUE AUDIO OUTPUTS RIGHT, LEFT''' - Analogue outputs for connection to a pre-amplifier or directly to a power amplifier if the internal volume control is enabled.
# '''TOSLINK OUT''' - For connecting to a device with a digital optical input.
# '''SPDIF OUT''' - For connecting to a device with a digital electrical (coaxial) input.
# '''RCU ACCESSORY''' - For connecting to Linn BASIK3 or BASIK3-IR.
# '''RS232 PORTS''' - For connection to Linn source products without ethernet ports.
# '''FALLBACK''' - Used when reprogramming the unit.
# '''ETHERNET''' - For connecting the unit to the network.

<br>

== '''Front Panel Connections''' ==

[[Image:SneakyMusicDS Silv Front RGB 72DPI.jpg|center|747x245px]]

Product status is indicated by the LED behind the Linn badge, default settings are shown below. <br>

'''LED OFF''' - no power <br>'''LED ON DIM''' - product in standby <br>'''LED ON BRIGHT''' - product is active <br>'''LED SLOW FLASH''' - searching for IP address (boot) <br>'''LED FAST FLASH''' - fallback (re-programme)

Note: LED may be turned off using Linn Konfig. <br><br>

== '''Installation''' ==

Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

* '''Unpacking''' - Please read the [http://docs.linn.co.uk/wiki/index.php/product_unpacking information] on unpacking your Sneaky Music DS.

* '''Positioning''' - Please read the [http://docs.linn.co.uk/wiki/index.php/product_positioning information] on positioning your Sneaky Music DS.

* '''Important Information:Protection''' - The Sneaky Music DS features over-current and over-temperature [http://docs.linn.co.uk/wiki/index.php/amplifier_protection protection]

For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]