View source for Template:TroubleShooting:ARC

ARC setting on your Television vary from manufacturer to manufacturer. So please double check your TV setup manual.

<u><b>Common issues for the lack of ARC audio:</b></u>
1. The standard Linn DSM can only playback stereo audio. If the TV is set to output '''Dolby Digital''' or other Surround format then the Linn DSM will not play this audio and stay silent. <br>
::> Make sure the audio output is set to '''"STEREO"''''
::> If you are using an built-in service to the TV, such as Netflix, Amazon Prime etc, that you control from the TV handset then try a standard aerial TV channel or an external Satellite receiver and find out if you get any audio back from these TV sources.
  
2. The TV audio setup may be conflicting with itself.
::> If possible do an "AV RESET" or equivalent on your TV, then setup for '''Audio format - Stereo''' and '''CEC-enabled''' (CEC can go by different names AnyNet+, Veiralink, SimpLink, RIHD, Kuro Link..... etc. Check what your TV call it)<br>
3. You are connected to the wrong socket on your TV. 
::> Check the Linn DSM HDMI output is connected to the TV socket that states <b>"ARC"</b><br><br>
4. <u>'''Sony TV''''s and '''SKY-Q'''</u>: It has been reported that this configuration can cause lack of ARC audio. When it does work sometimes there is a crack/bang noise from the speaker when the system is put to Sleep/Standy. 
::> The solution is to disable <b><u>HDMI control</u></b> on the '''SKY-Q''' box and power cycle all of the products. (This is primarily an issue between Sky-Q and Sony Tv's communications)