https://docs.linn.co.uk/wiki/api.php?action=feedcontributions&user=Simonc&feedformat=atom
LinnDocs - User contributions [en]
2024-03-28T23:54:46Z
User contributions
MediaWiki 1.31.1
https://docs.linn.co.uk/wiki/index.php?title=PcmSurround&diff=27019
PcmSurround
2022-12-14T16:48:28Z
<p>Simonc: /* Definitions */</p>
<hr />
<div>=DSM Surround Sound without DSP module=<br />
This page describes how to configure a surround sound system without using a surround decoder module in a DSM. In all the cases below, surround decode is performed in another device connected to the DSM by HDMI.<br />
<br />
Non-encoded (PCM) surround audio playback is supported by the following DSM players<br />
* Any DSM with HDMI and/or HDMI eARC inputs and Exakt outputs<br />
* Selekt DSM (Classic and Edition) with 2 or more 2-channel modules<br />
<br />
== Summary ==<br />
The most reliable configuration is as follows:<br />
* access video streaming services (Netflix, Amazon Prime, BBC iPlayer, etc.) through either Apple TV or Sony Playstation connected to a DSM HDMI input. Switch the DSM to the HDMI[1..4] source for these<br />
* access TV channels via eARC. Switch the DSM to the eARC source for these.<br />
<br />
Many other configurations are possible. Some may be more appropriate for any given combination of TV, disc player and streaming device. More detailed notes on these are included below. <i>Note that these configurations will need to be tested by the retailer or prospective purchaser case by case.</i><br />
<br />
== Definitions ==<br />
* <b>HDMI Source</b>: Any device which can supply audio to the DSM HDMI input<br />
** Set-top box such as SkyQ, Apple TV etc.<br />
** Streaming devices such as Amazon Firestick, Chromecast, Roku etc.<br />
** Blu-ray players, Games consoles etc. <br />
* <b>TV</b>: Any video output device<br />
** Television<br />
** Projector<br />
<br />
==Configurations==<br />
====(1) HDMI Source -> DSM HDMI input : DSM HDMI out -> TV====<br />
The <b>HDMI source</b> device must supply PCM (i.e. decoded) surround audio to the DSM over HDMI.<br />
<br>If the original content is encoded (Dolby/DTS), the HDMI source device needs to decode to PCM audio and then output to the DSM over HDMI.<br />
<br />
====(2) TV HDMI eARC out -> DSM HDMI out====<br />
The <b>TV</b> must supply PCM audio to the DSM over HDMI eARC<br />
<br>If the original content is encoded (Dolby/DTS), the TV needs to decode to PCM audio and then output over TV HDMI eARC over HDMI.<br />
<br />
====(3) HDMI Source -> TV HDMI input : TV HDMI eARC out -> DSM HDMI====<br />
The <b>TV</b> must supply PCM surround audio to the DSM over HDMI eARC<br />
* The same requirements as scenario (2) above<br />
* Additionally, decode of encoded (Dolby/DTS) media may be performed on either TV or HDMI source before passing (decoded) PCM audio out TV HDMI eARC over HDMI.<br />
<br />
NOTES<br />
* Due to the vast array of available HDMI source and TV devices it is impossible for Linn to specify whether any given setup will function as required. Even within devices from any given manufacturer there are different hardware and software variants which can affect this functionality.<br />
* Behaviour can differ between different streaming services within the same source device <br />
* Playback of PCM surround audio using SPDIF or TOSLINK inputs is NOT supported<br />
<br />
==Tested Devices==<br />
<br />
* Table shows DSM audio output channels when no DSP module fitted<br />
* All devices and services tested are UK specification<br />
<br />
{| cellspacing="0" cellpadding="5" border="0" width="700"<br />
|- bgcolor="#c0c0c0"<br />
|'''Device'''<br />
|'''Media Source'''<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#c0c0c0"<br />
|<br />
|'''Sat / Aerial'''<br />
|'''Bluray'''<br />
|'''Game'''<br />
|'''Prime Video'''<br />
|'''BBC iPlayer'''<br />
|'''Netflix'''<br />
|'''Plex 7.1 Test Track'''<br />
|'''External HDMI source'''<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Amazon Firestick 4K'''<br />
|<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Apple TV'''<br />
|<br />
|<br />
|<br />
|5.1<br />
|2.0<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Sony PS4/PS5'''<br />
|<br />
|7.1<br />
|7.1<br />
|5.1<br />
|2.0<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Nvidia Shield'''<br />
|<br />
|<br />
|5.1<br />
|<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Oppo Disc Player'''<br />
|<br />
|7.1<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Sky Q'''<br />
|2.0<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''LG TV (eARC)'''<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|7.1<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Panasonic TV (eARC)'''<br />
|2.0<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|2.0<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Sony TV (eARC)'''<br />
|<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|2.0<br />
|<br />
<br />
|}</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=PcmSurround&diff=27018
PcmSurround
2022-12-14T16:35:02Z
<p>Simonc: /* Configurations */</p>
<hr />
<div>=DSM Surround Sound without DSP module=<br />
This page describes how to configure a surround sound system without using a surround decoder module in a DSM. In all the cases below, surround decode is performed in another device connected to the DSM by HDMI.<br />
<br />
Non-encoded (PCM) surround audio playback is supported by the following DSM players<br />
* Any DSM with HDMI and/or HDMI eARC inputs and Exakt outputs<br />
* Selekt DSM (Classic and Edition) with 2 or more 2-channel modules<br />
<br />
== Summary ==<br />
The most reliable configuration is as follows:<br />
* access video streaming services (Netflix, Amazon Prime, BBC iPlayer, etc.) through either Apple TV or Sony Playstation connected to a DSM HDMI input. Switch the DSM to the HDMI[1..4] source for these<br />
* access TV channels via eARC. Switch the DSM to the eARC source for these.<br />
<br />
Many other configurations are possible. Some may be more appropriate for any given combination of TV, disc player and streaming device. More detailed notes on these are included below. <i>Note that these configurations will need to be tested by the retailer or prospective purchaser case by case.</i><br />
<br />
== Definitions ==<br />
* <b>HDMI Source</b>: Any device which can supplies audio to the DSM HDMI input<br />
** Set-top box such as SkyQ, Apple TV etc.<br />
** Streaming devices such as Amazon Firestick, Chromecast, Roku etc.<br />
** Blu-ray players, Games consoles etc. <br />
* <b>TV</b>: Any video output device<br />
** Television<br />
** Projector<br />
<br />
==Configurations==<br />
====(1) HDMI Source -> DSM HDMI input : DSM HDMI out -> TV====<br />
The <b>HDMI source</b> device must supply PCM (i.e. decoded) surround audio to the DSM over HDMI.<br />
<br>If the original content is encoded (Dolby/DTS), the HDMI source device needs to decode to PCM audio and then output to the DSM over HDMI.<br />
<br />
====(2) TV HDMI eARC out -> DSM HDMI out====<br />
The <b>TV</b> must supply PCM audio to the DSM over HDMI eARC<br />
<br>If the original content is encoded (Dolby/DTS), the TV needs to decode to PCM audio and then output over TV HDMI eARC over HDMI.<br />
<br />
====(3) HDMI Source -> TV HDMI input : TV HDMI eARC out -> DSM HDMI====<br />
The <b>TV</b> must supply PCM surround audio to the DSM over HDMI eARC<br />
* The same requirements as scenario (2) above<br />
* Additionally, decode of encoded (Dolby/DTS) media may be performed on either TV or HDMI source before passing (decoded) PCM audio out TV HDMI eARC over HDMI.<br />
<br />
NOTES<br />
* Due to the vast array of available HDMI source and TV devices it is impossible for Linn to specify whether any given setup will function as required. Even within devices from any given manufacturer there are different hardware and software variants which can affect this functionality.<br />
* Behaviour can differ between different streaming services within the same source device <br />
* Playback of PCM surround audio using SPDIF or TOSLINK inputs is NOT supported<br />
<br />
==Tested Devices==<br />
<br />
* Table shows DSM audio output channels when no DSP module fitted<br />
* All devices and services tested are UK specification<br />
<br />
{| cellspacing="0" cellpadding="5" border="0" width="700"<br />
|- bgcolor="#c0c0c0"<br />
|'''Device'''<br />
|'''Media Source'''<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#c0c0c0"<br />
|<br />
|'''Sat / Aerial'''<br />
|'''Bluray'''<br />
|'''Game'''<br />
|'''Prime Video'''<br />
|'''BBC iPlayer'''<br />
|'''Netflix'''<br />
|'''Plex 7.1 Test Track'''<br />
|'''External HDMI source'''<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Amazon Firestick 4K'''<br />
|<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Apple TV'''<br />
|<br />
|<br />
|<br />
|5.1<br />
|2.0<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Sony PS4/PS5'''<br />
|<br />
|7.1<br />
|7.1<br />
|5.1<br />
|2.0<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Nvidia Shield'''<br />
|<br />
|<br />
|5.1<br />
|<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Oppo Disc Player'''<br />
|<br />
|7.1<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Sky Q'''<br />
|2.0<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''LG TV (eARC)'''<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|7.1<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Panasonic TV (eARC)'''<br />
|2.0<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|2.0<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Sony TV (eARC)'''<br />
|<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|2.0<br />
|<br />
<br />
|}</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=PcmSurround&diff=27017
PcmSurround
2022-12-14T16:28:52Z
<p>Simonc: /* Definitions */</p>
<hr />
<div>=DSM Surround Sound without DSP module=<br />
This page describes how to configure a surround sound system without using a surround decoder module in a DSM. In all the cases below, surround decode is performed in another device connected to the DSM by HDMI.<br />
<br />
Non-encoded (PCM) surround audio playback is supported by the following DSM players<br />
* Any DSM with HDMI and/or HDMI eARC inputs and Exakt outputs<br />
* Selekt DSM (Classic and Edition) with 2 or more 2-channel modules<br />
<br />
== Summary ==<br />
The most reliable configuration is as follows:<br />
* access video streaming services (Netflix, Amazon Prime, BBC iPlayer, etc.) through either Apple TV or Sony Playstation connected to a DSM HDMI input. Switch the DSM to the HDMI[1..4] source for these<br />
* access TV channels via eARC. Switch the DSM to the eARC source for these.<br />
<br />
Many other configurations are possible. Some may be more appropriate for any given combination of TV, disc player and streaming device. More detailed notes on these are included below. <i>Note that these configurations will need to be tested by the retailer or prospective purchaser case by case.</i><br />
<br />
== Definitions ==<br />
* <b>HDMI Source</b>: Any device which can supplies audio to the DSM HDMI input<br />
** Set-top box such as SkyQ, Apple TV etc.<br />
** Streaming devices such as Amazon Firestick, Chromecast, Roku etc.<br />
** Blu-ray players, Games consoles etc. <br />
* <b>TV</b>: Any video output device<br />
** Television<br />
** Projector<br />
<br />
==Configurations==<br />
====(1) Source -> DSM HDMI input : DSM HDMI out -> TV====<br />
The <b>source</b> device must supply PCM surround audio to the DSM over HDMI<br />
* For native PCM media this needs to be output without change<br />
* For encoded media (Dolby/DTS) this needs to be decoded to PCM surround audio and then output to the DSM over HDMI<br />
<br />
====(2) TV HDMI eARC out -> DSM HDMI out====<br />
The <b>TV</b> must supply PCM surround audio to the DSM over HDMI eARC<br />
* For native PCM media this needs to be output over TV HDMI eARC without change<br />
* For encoded media (Dolby/DTS) this needs to be decoded to PCM surround audio by the TV and then output over TV HDMI eARC over HDMI<br />
<br />
====(3) Source -> TV HDMI input : TV HDMI eARC out -> DSM HDMI====<br />
The <b>TV</b> must supply PCM surround audio to the DSM over HDMI eARC<br />
* The same requirements as scenario (2) above<br />
* Additionally<br />
** TV must pass through native PCM to HDMI eARC<br />
** Decode of encoded media must be performed on either TV or source and passed through to TV HDMI eARC out<br />
<br />
NOTES<br />
* Due to the vast array of available source and TV devices it is impossible for Linn to specify whether any given setup will function as required. Even within devices from any given manufacturer there are different hardware and software variants which can affect this functionality.<br />
* Behaviour can differ between different streaming services within the same source device <br />
* Playback of PCM surround audio using SPDIF or TOSLINK inputs is NOT supported<br />
<br />
==Tested Devices==<br />
<br />
* Table shows DSM audio output channels when no DSP module fitted<br />
* All devices and services tested are UK specification<br />
<br />
{| cellspacing="0" cellpadding="5" border="0" width="700"<br />
|- bgcolor="#c0c0c0"<br />
|'''Device'''<br />
|'''Media Source'''<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#c0c0c0"<br />
|<br />
|'''Sat / Aerial'''<br />
|'''Bluray'''<br />
|'''Game'''<br />
|'''Prime Video'''<br />
|'''BBC iPlayer'''<br />
|'''Netflix'''<br />
|'''Plex 7.1 Test Track'''<br />
|'''External HDMI source'''<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Amazon Firestick 4K'''<br />
|<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Apple TV'''<br />
|<br />
|<br />
|<br />
|5.1<br />
|2.0<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Sony PS4/PS5'''<br />
|<br />
|7.1<br />
|7.1<br />
|5.1<br />
|2.0<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Nvidia Shield'''<br />
|<br />
|<br />
|5.1<br />
|<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Oppo Disc Player'''<br />
|<br />
|7.1<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Sky Q'''<br />
|2.0<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''LG TV (eARC)'''<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|7.1<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Panasonic TV (eARC)'''<br />
|2.0<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|2.0<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Sony TV (eARC)'''<br />
|<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|2.0<br />
|<br />
<br />
|}</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=PcmSurround&diff=26986
PcmSurround
2022-12-13T16:14:52Z
<p>Simonc: /* DSM Surround Sound without DSP module */</p>
<hr />
<div>=DSM Surround Sound without DSP module=<br />
This page describes how to configure a surround sound system without using a surround decoder module in a DSM. In all the cases below, surround decode is performed in another device connected to the DSM by HDMI.<br />
<br />
Non-encoded (PCM) surround audio playback is supported by the following DSM players<br />
* Any DSM with HDMI and/or HDMI eARC inputs and Exakt outputs<br />
* Selekt DSM (Classic and Edition) with 2 or more 2-channel modules<br />
<br />
== Summary ==<br />
The most reliable configuration is as follows:<br />
* access video streaming services (Netflix, Amazon Prime, BBC iPlayer, etc.) through either Apple TV or Sony Playstation connected to a DSM HDMI input. Switch the DSM to the HDMI[1..4] source for these<br />
* access TV channels via eARC. Switch the DSM to the eARC source for these.<br />
<br />
Many other configurations are possible. Some may be more appropriate for any given combination of TV, disc player and streaming device. More detailed notes on these are included below. <i>Note that these configurations will need to be tested by the retailer or prospective purchaser case by case.</i><br />
<br />
== Definitions ==<br />
* <b>Source</b>: Any device which can supplies audio to the DSM HDMI input<br />
** Set-top box such as SkyQ, Apple TV etc.<br />
** Streaming devices such as Amazon Firestick, Chromecast, Roku etc.<br />
** Blu-ray players, Games consoles etc. <br />
* <b>TV</b>: Any video output device<br />
** Television<br />
** Projector<br />
<br />
==Configurations==<br />
====(1) Source -> DSM HDMI input : DSM HDMI out -> TV====<br />
The <b>source</b> device must supply PCM surround audio to the DSM over HDMI<br />
* For native PCM media this needs to be output without change<br />
* For encoded media (Dolby/DTS) this needs to be decoded to PCM surround audio and then output to the DSM over HDMI<br />
<br />
====(2) TV HDMI eARC out -> DSM HDMI out====<br />
The <b>TV</b> must supply PCM surround audio to the DSM over HDMI eARC<br />
* For native PCM media this needs to be output over TV HDMI eARC without change<br />
* For encoded media (Dolby/DTS) this needs to be decoded to PCM surround audio by the TV and then output over TV HDMI eARC over HDMI<br />
<br />
====(3) Source -> TV HDMI input : TV HDMI eARC out -> DSM HDMI====<br />
The <b>TV</b> must supply PCM surround audio to the DSM over HDMI eARC<br />
* The same requirements as scenario (2) above<br />
* Additionally<br />
** TV must pass through native PCM to HDMI eARC<br />
** Decode of encoded media must be performed on either TV or source and passed through to TV HDMI eARC out<br />
<br />
NOTES<br />
* Due to the vast array of available source and TV devices it is impossible for Linn to specify whether any given setup will function as required. Even within devices from any given manufacturer there are different hardware and software variants which can affect this functionality.<br />
* Behaviour can differ between different streaming services within the same source device <br />
* Playback of PCM surround audio using SPDIF or TOSLINK inputs is NOT supported<br />
<br />
==Tested Devices==<br />
<br />
* Table shows DSM audio output channels when no DSP module fitted<br />
* All devices and services tested are UK specification<br />
<br />
{| cellspacing="0" cellpadding="5" border="0" width="700"<br />
|- bgcolor="#c0c0c0"<br />
|'''Device'''<br />
|'''Media Source'''<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#c0c0c0"<br />
|<br />
|'''Sat / Aerial'''<br />
|'''Bluray'''<br />
|'''Game'''<br />
|'''Prime Video'''<br />
|'''BBC iPlayer'''<br />
|'''Netflix'''<br />
|'''Plex 7.1 Test Track'''<br />
|'''External HDMI source'''<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Amazon Firestick 4K'''<br />
|<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Apple TV'''<br />
|<br />
|<br />
|<br />
|5.1<br />
|2.0<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Sony PS4/PS5'''<br />
|<br />
|7.1<br />
|7.1<br />
|5.1<br />
|2.0<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Nvidia Shield'''<br />
|<br />
|<br />
|5.1<br />
|<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Oppo Disc Player'''<br />
|<br />
|7.1<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Sky Q'''<br />
|2.0<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''LG TV (eARC)'''<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|7.1<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Panasonic TV (eARC)'''<br />
|2.0<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|2.0<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Sony TV (eARC)'''<br />
|<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|2.0<br />
|<br />
<br />
|}</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=PcmSurround&diff=26977
PcmSurround
2022-12-13T09:38:24Z
<p>Simonc: /* Summary */</p>
<hr />
<div>=DSM Surround Sound without DSP module=<br />
This page describes how to configure a surround sound system without using a surround decoder module in a DSM.<br />
<br />
Non-encoded (PCM) surround audio playback is supported by the following DSM players<br />
* Any DSM with HDMI and/or HDMI eARC inputs and Exakt outputs<br />
* Selekt DSM (Classic and Edition) with 2 or more 2-channel modules<br />
<br />
== Summary ==<br />
The most reliable configuration is as follows:<br />
* access video streaming services (Netflix, Amazon Prime, BBC iPlayer, etc.) through either Apple TV or Sony Playstation connected to a DSM HDMI input. Switch the DSM to the HDMI[1..4] source for these<br />
* access TV channels via eARC. Switch the DSM to the eARC source for these.<br />
<br />
Many other configurations are possible. Some may be more appropriate for any given combination of TV, disc player and streaming device. More detailed notes on these are included below. <i>Note that these configurations will need to be tested by the retailer or prospective purchaser case by case.</i><br />
<br />
== Definitions ==<br />
* <b>Source</b>: Any device which can supplies audio to the DSM HDMI input<br />
** Set-top box such as SkyQ, Apple TV etc.<br />
** Streaming devices such as Amazon Firestick, Chromecast, Roku etc.<br />
** Blu-ray players, Games consoles etc. <br />
* <b>TV</b>: Any video output device<br />
** Television<br />
** Projector<br />
<br />
==Configurations==<br />
====(1) Source -> DSM HDMI input : DSM HDMI out -> TV====<br />
[ insert a diagram here ]<br />
<br />
The <b>source</b> device must supply PCM surround audio to the DSM over HDMI<br />
* For native PCM media this needs to be output without change<br />
* For encoded media (Dolby/DTS) this needs to be decoded to PCM surround audio and then output to the DSM over HDMI<br />
<br />
====(2) TV HDMI eARC out -> DSM HDMI out====<br />
[ insert a diagram here ]<br />
<br />
The <b>TV</b> must supply PCM surround audio to the DSM over HDMI eARC<br />
* For native PCM media this needs to be output over TV HDMI eARC without change<br />
* For encoded media (Dolby/DTS) this needs to be decoded to PCM surround audio by the TV and then output over TV HDMI eARC over HDMI<br />
<br />
====(3) Source -> TV HDMI input : TV HDMI eARC out -> DSM HDMI====<br />
[ insert a diagram here ]<br />
<br />
The <b>TV</b> must supply PCM surround audio to the DSM over HDMI eARC<br />
* The same requirements as scenario (2) above<br />
* Additionally<br />
** TV must pass through native PCM to HDMI eARC<br />
** Decode of encoded media must be performed on either TV or source and passed through to TV HDMI eARC out<br />
<br />
NOTES<br />
* Due to the vast array of available source and TV devices it is impossible for Linn to specify whether any given setup will function as required. Even within devices from any given manufacturer there are different hardware and software variants which can affect this functionality.<br />
* Behaviour can differ between different streaming services within the same source device <br />
* Playback of PCM surround audio using SPDIF or TOSLINK inputs is NOT supported<br />
<br />
==Tested Devices==<br />
<br />
* Table shows DSM audio output channels when no DSP module fitted<br />
* All devices and services tested are UK specification<br />
<br />
{| cellspacing="0" cellpadding="5" border="0" width="700"<br />
|- bgcolor="#c0c0c0"<br />
|'''Device'''<br />
|'''Media Source'''<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#c0c0c0"<br />
|<br />
|'''Sat / Aerial'''<br />
|'''Bluray'''<br />
|'''Game'''<br />
|'''Prime Video'''<br />
|'''BBC iPlayer'''<br />
|'''Netflix'''<br />
|'''Plex 7.1 Test Track'''<br />
|'''External HDMI source'''<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Amazon Firestick 4K'''<br />
|<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Apple TV'''<br />
|<br />
|<br />
|<br />
|5.1<br />
|2.0<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Sony PS4/PS5'''<br />
|<br />
|7.1<br />
|7.1<br />
|5.1<br />
|2.0<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Nvidia Shield'''<br />
|<br />
|<br />
|5.1<br />
|<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Oppo Disc Player'''<br />
|<br />
|7.1<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Sky Q'''<br />
|2.0<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''LG TV (eARC)'''<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|7.1<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Panasonic TV (eARC)'''<br />
|2.0<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|2.0<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Sony TV (eARC)'''<br />
|<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|7.1<br />
|<br />
<br />
|}</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=PcmSurround&diff=26976
PcmSurround
2022-12-12T14:30:14Z
<p>Simonc: Better grouping of sources</p>
<hr />
<div>=DSM Surround Sound without DSP module=<br />
This page describes how to configure a surround sound system without using a surround decoder module in a DSM.<br />
<br />
Non-encoded (PCM) surround audio playback is supported by the following DSM players<br />
* Any DSM with HDMI and/or HDMI eARC inputs and Exakt outputs<br />
* Selekt DSM (Classic and Edition) with 2 or more 2-channel modules<br />
<br />
== Summary ==<br />
The most reliable configuration is as follows:<br />
* access video streaming services (Netflix, Amazon Prime, BBC iPlayer, etc.) through either Apple TV or Sony Playstation connected to a DSM HDMI input. Switch the DSM to the HDMI[1..4] source for these<br />
* access broadcast TV channels via eARC. Switch the DSM to the eARC source for these.<br />
<br />
Many other configurations are possible. Some may be more appropriate for any given combination of TV, disc player and streaming device. More detailed notes on these are included below. <i>Note that these configurations will need to be tested by the retailer or prospective purchaser case by case.</i><br />
<br />
== Definitions ==<br />
* <b>Source</b>: Any device which can supplies audio to the DSM HDMI input<br />
** Set-top box such as SkyQ, Apple TV etc.<br />
** Streaming devices such as Amazon Firestick, Chromecast, Roku etc.<br />
** Blu-ray players, Games consoles etc. <br />
* <b>TV</b>: Any video output device<br />
** Television<br />
** Projector<br />
<br />
==Configurations==<br />
====(1) Source -> DSM HDMI input : DSM HDMI out -> TV====<br />
[ insert a diagram here ]<br />
<br />
The <b>source</b> device must supply PCM surround audio to the DSM over HDMI<br />
* For native PCM media this needs to be output without change<br />
* For encoded media (Dolby/DTS) this needs to be decoded to PCM surround audio and then output to the DSM over HDMI<br />
<br />
====(2) TV HDMI eARC out -> DSM HDMI out====<br />
[ insert a diagram here ]<br />
<br />
The <b>TV</b> must supply PCM surround audio to the DSM over HDMI eARC<br />
* For native PCM media this needs to be output over TV HDMI eARC without change<br />
* For encoded media (Dolby/DTS) this needs to be decoded to PCM surround audio by the TV and then output over TV HDMI eARC over HDMI<br />
<br />
====(3) Source -> TV HDMI input : TV HDMI eARC out -> DSM HDMI====<br />
[ insert a diagram here ]<br />
<br />
The <b>TV</b> must supply PCM surround audio to the DSM over HDMI eARC<br />
* The same requirements as scenario (2) above<br />
* Additionally<br />
** TV must pass through native PCM to HDMI eARC<br />
** Decode of encoded media must be performed on either TV or source and passed through to TV HDMI eARC out<br />
<br />
NOTES<br />
* Due to the vast array of available source and TV devices it is impossible for Linn to specify whether any given setup will function as required. Even within devices from any given manufacturer there are different hardware and software variants which can affect this functionality.<br />
* Behaviour can differ between different streaming services within the same source device <br />
* Playback of PCM surround audio using SPDIF or TOSLINK inputs is NOT supported<br />
<br />
==Tested Devices==<br />
<br />
* Table shows DSM audio output channels when no DSP module fitted<br />
* All devices and services tested are UK specification<br />
<br />
{| cellspacing="0" cellpadding="5" border="0" width="700"<br />
|- bgcolor="#c0c0c0"<br />
|'''Device'''<br />
|'''Media Source'''<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#c0c0c0"<br />
|<br />
|'''Sat / Aerial'''<br />
|'''Bluray'''<br />
|'''Game'''<br />
|'''Prime Video'''<br />
|'''BBC iPlayer'''<br />
|'''Netflix'''<br />
|'''Plex 7.1 Test Track'''<br />
|'''External HDMI source'''<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Amazon Firestick 4K'''<br />
|<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Apple TV'''<br />
|<br />
|<br />
|<br />
|5.1<br />
|2.0<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Sony PS4/PS5'''<br />
|<br />
|7.1<br />
|7.1<br />
|5.1<br />
|2.0<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Nvidia Shield'''<br />
|<br />
|<br />
|5.1<br />
|<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Oppo Disc Player'''<br />
|<br />
|7.1<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Sky Q'''<br />
|2.0<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''LG TV (eARC)'''<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|7.1<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Panasonic TV (eARC)'''<br />
|2.0<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|2.0<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Sony TV (eARC)'''<br />
|<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|7.1<br />
|<br />
<br />
|}</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=PcmSurround&diff=26975
PcmSurround
2022-12-12T14:28:51Z
<p>Simonc: Make most reliable system more prominent</p>
<hr />
<div>=DSM Surround Sound without DSP module=<br />
This page describes how to configure a surround sound system without using a surround decoder module in a DSM.<br />
<br />
Non-encoded (PCM) surround audio playback is supported by the following DSM players<br />
* Any DSM with HDMI and/or HDMI eARC inputs and Exakt outputs<br />
* Selekt DSM (Classic and Edition) with 2 or more 2-channel modules<br />
<br />
== Summary ==<br />
The most reliable configuration is as follows:<br />
* access video streaming services (Netflix, Amazon Prime, BBC iPlayer, etc.) through either Apple TV or Sony Playstation connected to a DSM HDMI input. Switch the DSM to the HDMI[1..4] source for these<br />
* access broadcast TV channels via eARC. Switch the DSM to the eARC source for these.<br />
<br />
Many other configurations are possible. Some may be more appropriate for any given combination of TV, disc player and streaming device. More detailed notes on these are included below. <i>Note that these configurations will need to be tested by the retailer or prospective purchaser case by case.</i><br />
<br />
== Definitions ==<br />
* <b>Source</b>: Any device which can supplies audio to the DSM HDMI input<br />
** Set-top box such as SkyQ, Apple TV etc.<br />
** Streaming devices such as Amazon Firestick, Chromecast, Roku etc.<br />
** Blu-ray players, Games consoles etc. <br />
* <b>TV</b>: Any video output device<br />
** Television<br />
** Projector<br />
<br />
==Configurations==<br />
====(1) Source -> DSM HDMI input : DSM HDMI out -> TV====<br />
[ insert a diagram here ]<br />
<br />
The <b>source</b> device must supply PCM surround audio to the DSM over HDMI<br />
* For native PCM media this needs to be output without change<br />
* For encoded media (Dolby/DTS) this needs to be decoded to PCM surround audio and then output to the DSM over HDMI<br />
<br />
====(2) TV HDMI eARC out -> DSM HDMI out====<br />
[ insert a diagram here ]<br />
<br />
The <b>TV</b> must supply PCM surround audio to the DSM over HDMI eARC<br />
* For native PCM media this needs to be output over TV HDMI eARC without change<br />
* For encoded media (Dolby/DTS) this needs to be decoded to PCM surround audio by the TV and then output over TV HDMI eARC over HDMI<br />
<br />
====(3) Source -> TV HDMI input : TV HDMI eARC out -> DSM HDMI====<br />
[ insert a diagram here ]<br />
<br />
The <b>TV</b> must supply PCM surround audio to the DSM over HDMI eARC<br />
* The same requirements as scenario (2) above<br />
* Additionally<br />
** TV must pass through native PCM to HDMI eARC<br />
** Decode of encoded media must be performed on either TV or source and passed through to TV HDMI eARC out<br />
<br />
NOTES<br />
* Due to the vast array of available source and TV devices it is impossible for Linn to specify whether any given setup will function as required. Even within devices from any given manufacturer there are different hardware and software variants which can affect this functionality.<br />
* Behaviour can differ between different streaming services within the same source device <br />
* Playback of PCM surround audio using SPDIF or TOSLINK inputs is NOT supported<br />
<br />
==Tested Devices==<br />
<br />
* Table shows DSM audio output channels when no DSP module fitted<br />
* All devices and services tested are UK specification<br />
<br />
{| cellspacing="0" cellpadding="5" border="0" width="700"<br />
|- bgcolor="#c0c0c0"<br />
|'''Device'''<br />
|'''Media Source'''<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#c0c0c0"<br />
|<br />
|'''Sat / Aerial'''<br />
|'''Bluray'''<br />
|'''Game'''<br />
|'''Prime Video'''<br />
|'''BBC iPlayer'''<br />
|'''Netflix'''<br />
|'''Plex 7.1 Test Track'''<br />
|'''External HDMI source'''<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Amazon Firestick 4K'''<br />
|<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Apple TV'''<br />
|<br />
|<br />
|<br />
|5.1<br />
|2.0<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''LG TV (eARC)'''<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|7.1<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Nvidia Shield'''<br />
|<br />
|<br />
|5.1<br />
|<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Panasonic TV (eARC)'''<br />
|2.0<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|2.0<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Oppo Disc Player'''<br />
|<br />
|7.1<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Sky Q'''<br />
|2.0<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|<br />
|<br />
<br />
|- bgcolor="#d0d0d0"<br />
|'''Sony PS4/PS5'''<br />
|<br />
|7.1<br />
|7.1<br />
|5.1<br />
|2.0<br />
|5.1<br />
|5.1<br />
|<br />
|<br />
<br />
|- bgcolor="#d8d8d8"<br />
|'''Sony TV (eARC)'''<br />
|<br />
|<br />
|<br />
|2.0<br />
|2.0<br />
|2.0<br />
|<br />
|7.1<br />
|<br />
<br />
|}</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=ReleaseNotes&diff=22231
ReleaseNotes
2020-07-21T15:08:37Z
<p>Simonc: </p>
<hr />
<div><!--<span style="color:red">ONLY DO A SOFTWARE UPDATE IF THIS WILL PROVIDE A NEW SERVICE OR FIX A REPORTED ISSUE YOU ARE HAVING WITH YOUR LINN DS/DSM</span>--><br />
<span style=" font-size:150%;">Davaar Release Notes</span><br />
For help on how to upgrade your DS firmware, please see [[How_to_Upgrade_DS_Software|How to Upgrade DS Software]]<br />
<br />
===Davaar 76 Build 377 (4.76.377) Released on 21 Jul 2020<span class="mw-customtoggle-Davaar76"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar76"><br />
<br />
===Maintenance and Bug fixes===<br />
* Fixed: Cannot select HDMI ARC when there are more than 2 sources on CEC bus (this only occurred when certain source devices were on the bus)<br />
* Fixed: HDMI source switching issues when there are more than 2 sources on CEC bus (this only occurred when certain source devices were on the bus)<br />
* Fixed: No HDMI audio without TV/Sink device attached<br />
* Fixed #7009: Intermittent 10s delay in Songcast receivers joining stream<br />
* Fixed #7216: Laggy UI when starting certain streams on network sources<br />
* Fixed #7177: Space Optimisation sometimes applied to headphone output<br />
* Fixed #6509: Selekt DSM: Can't use presets > 9 from handset<br />
* Fixed #7213: Selekt DSM: Show track info when on Songcast<br />
* Fixed #7034: Selekt DSM: Songcast source name in UI is not consistent<br />
* Update HLS implementation to support HTTPS streams<br />
* Fix to reduce severity of audio drop-outs from some Airplay senders when there are network drop-outs<br />
* Selekt DSM, Series 3: Added options to enable/disable Wi-Fi and Bluetooth<br />
* Retain Songcast sender info on power cycle when a device is setup as a Songcast receiver<br />
<br />
</div><br />
<br />
===Davaar 75 Build 360 (4.75.360) Released on 13 Feb 2020<span class="mw-customtoggle-Davaar75"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar75"><br />
===New features===<br />
* Wi-Fi network connectivity for Selekt (will work on all existing Selekt devices)<br />
* Bluetooth audio playback for Selekt (will work on all existing Selekt devices)<br />
* Configurable SPDIF input/output for Selekt (will work on all existing Selekt devices on SPDIF 1 connector)<br />
* MPEG2 AAC support for Selekt with surround module and Core 1 products with HDMI 2.0 and surround module<br />
<br />
===Maintenance and Bug fixes===<br />
* Mono downmix support for all Selekt variants<br />
* Enabled LPEC for Kustom<br />
* Added option to set startup volume for Kustom<br />
* Added option to reduce max playlist size<br />
* Improvements to changing between wired and wireless networks<br />
* Revert UPnP version to 1.0 (makes no change to any known control point)<br />
* Updated security libraries (fixes some rare crashes)<br />
* Improvements to reading TuneIn favourites<br />
* Updates to Qobuz usage reporting<br />
* Fixed (rare) repeating crash with very long Tidal or Qobuz user name<br />
* Improvements to some edge case behaviour shuffling a playlist<br />
* Fixed Selekt crash moving from HDMI to SPDIF/ TOSLINK source<br />
* Fixed hang when connection to Linn Account was interrupted<br />
* Fixed #6196: Selekt DSM: Display 'Failed to Play Pin'<br />
* Prevent volume from wrapping to max volume when decremented from zero<br />
* Added mechanism for clearing Wi-Fi credentials from device<br />
** Selekt can be done via the display menu<br />
** Series 3 cane be done with a press and hold of pin buttons 1,2 and 5 (2 seconds)<br />
</div><br />
<br />
===Davaar 74 Build 340 (4.74.340) Released on 17 Dec 2019<span class="mw-customtoggle-Davaar74"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar74"><br />
* Initial release for Kustom DSM<br />
</div><br />
<br />
===Davaar 73 Build 326 (4.73.326) Released on 24 Oct 2019<span class="mw-customtoggle-Davaar73"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar73"><br />
Released for Series 3 only<br />
* Updated generic bass model for Series 3 master device<br />
</div><br />
<br />
===Davaar 72 Build 323 (4.72.323) Released on 14 Oct 2019<span class="mw-customtoggle-Davaar72"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar72"><br />
Released for Series 3 only<br />
* Volume range adjustments for Series 3 <br />
** Unity gain now volume 100<br />
** Startup volume defaults to 60<br />
** Volume limit defaults to 100 <br />
</div><br />
<br />
===Davaar 71 Build 322 (4.71.322) Released on 24 Sep 2019<span class="mw-customtoggle-Davaar71"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar71"><br />
* Initial release for Series 3<br />
</div><br />
<br />
===Davaar 70 Build 300 (4.70.300) Released on 03 June 2019<span class="mw-customtoggle-Davaar70"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar70"><br />
* Implemented more reliable communication of device state to wireless control points<br />
* Added Balance and Lip Sync settings to Selekt menu<br />
* Fixed issue with changing balance on Selekt from legacy handsets<br />
* Selekt MM/MC inputs are no longer affected by gain settings applied to analog inputs<br />
* Fixed #6494: No LFE trim on Selekt TOS input<br />
* Fixed #6499: Crash entering Standby<br />
* Fixed #6504: Kiko: SourceToggle from remote no longer works<br />
* Fixed #6447: Kiko display does not illuminate on network control changes<br />
* Fixed #6455: Fix for unplayable radio stations (such as Radio RTV Drenthe and the Radio 10 family of stations)<br />
* Fixed #5211: HDMI Reading from an invalid EDID.<br />
* Fixed #6495: crash on digital input.<br />
* Fixed #5143: I2C bus access as power is going off.<br />
* Fixed numerous customer crash reports related to SiI9777 hardware.<br />
</div><br />
<br />
=== Davaar 69 Build 289 (4.69.289) Released on 06 May 2019<span class="mw-customtoggle-Davaar69"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar69"><br />
* Support for new Selekt modules: HDMI, DSP, 1.1<br />
* DSD performance improvements<br />
* Fixed missing center channel content on 4.0 configuration with space optimisation enabled. <br />
* Fixed crash on Selekt devices when using Konfig <br />
* Fixed a number of crashes reported automatically <br />
* Fixed crash on Selekt DSM when using the USB input<br />
* Fixed crash that can occur on stream on TOSLINK/SPDIF sources<br />
* Fixed automatic ARC source selection for non-Android Sony TV coming out of standby.<br />
* Fixed reboot with spdif or surround stream using a 2s lip-sync delay.<br />
* Fixed #6493: Fix crash that can occur on Qobuz login<br />
* Fixed #6490: DSF/DSD playback: Crack noise between tracks<br />
* Fixed #6482: Crash-on-boot when DS logged into certain Qobuz accounts<br />
* Fixed #6422: Radio preset not saved if just using the radio source <br />
* Fixed #6364: Volume offsets cannot be adjusted if Space Opt is disabled <br />
* Fixed #6406: KDSM - SPDIF lipsync issue and assert when DSP module fitted <br />
* Fixed #6351: Selekt crashes when Standby on/off Ir code is sent twice <br />
* Fixed #6386: Unicode characters on Radio name showing incorrectly on Selekt DSM <br />
* Fixed #6350: LED behavior on dial press (Radio Source) is not consistent <br />
* Fixed #6376: Selekt Display stuck on: Proximity sensor should be recalibrated periodically<br />
* Fixed #6344: Playlist navigation from handset should rotate through options without stopping<br />
* Fixed #6355: Core1 UI - time ticks not incrementing when on radio<br />
* Fixed #6356: REM 022 handset does not allow you to find the System information<br />
</div><br />
<br />
=== Davaar 68 Build 267 (4.68.267) Released on 28 Jan 2019<span class="mw-customtoggle-Davaar68"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar68"><br />
====Improved surround sound support====<br />
* DTS and Dolby decoding now available (requires a Surround DSP hardware upgrade module for any HDMI 2.0 capable Akurate or Klimax DSM) <br />
* A complimentary firmware upgrade for all Exaktboxes which allows any 6, 8 or 10 channel Exaktbox to be used in surround pass-through mode (driving up to 8 channels of surround audio) to connected speakers<br />
* More information can be found here: [http://docs.linn.co.uk/wiki/index.php/Surround_Sound_Variations#Linn_Surround_Module http://docs.linn.co.uk/wiki/index.php/Surround_Sound_Variations]<br />
</div><br />
<br />
=== Davaar 67 Build 262 (4.67.262) Released on 17 Dec 2018<span class="mw-customtoggle-Davaar67"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar67"><br />
* Reliability improvements for Selekt DSM display<br />
* Update secure sockets to use TLS v1.2<br />
* Fixed #6334: CEC issue with some TV's not bringing DSM out of standby<br />
* Fixed #6331: Selekt: Wake animation not displayed when waking device via network<br />
* Fixed #6337: Pins: radio preset will not restart after pause<br />
* Fixed #6329: Selekt: Display fails to switch off when using the dial to bring the device out of standby<br />
* Fixed #5278: Fix buffer overflow that can occur when selecting an external source<br />
</div><br />
<br />
=== Davaar 66 Build 255 (4.66.255) Released on 09 Nov 2018 <span class="mw-customtoggle-Davaar66"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar66"><br />
* Added DSD Playback support for Selekt DSM<br />
* Added ability to use Selekt DSM with external pre-amps (line out configuration, volume control disabled)<br />
* Fix for Selekt DSM display issues<br />
* Fix for handling digital input from legacy Linn CD players<br />
* Fix for hang when attempting to play Qobuz tracks not supported in user's region <br />
* Fixed possible hang changing room name from Linn web site<br />
* Fixed defect #6293: Sekrit DSM - Source selection via IR issue<br />
* Fixed defect #6294: Sekrit DSM - IR led not blinking on front panel.<br />
* Fixed defect #6221: Add volume control option for SelektDsm.<br />
* Fixed defect #6203: Fix deadlock in Exakt subsystem during device discovery (may manifest itself when coming out of standby).<br />
* Fixed defect #5782: Fix no audio from Urika II following power cycle when DS powers back onto Exakt source.<br />
* Fixed defect #6138: Fix deadlock starting Spotify playback while taking device out of standby.<br />
* Fixed defect #6246: Fix crash while playing FLAC file with format change mid-stream.<br />
* Fixed defect #6194: Fix invalid memory access on network adapter change.<br />
</div><br />
<br />
=== Davaar 65 Build 247 (4.65.247) Released on 27 Sep 2018 <span class="mw-customtoggle-Davaar65"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar65"><br />
* Initial release for Selekt DSM<br />
</div><br />
<br />
=== Davaar 64 Build 238 (4.64.238) Released on 25 Sep 2018 <span class="mw-customtoggle-Davaar64"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar64"><br />
* Added support for configuring a DS via a Linn account<br />
* Added support for pins<br />
<br />
==== Introducing Pins ====<br />
Pins are a new, convenient, way to access your favourite content.<br />
<br />
You will also need to download Kazoo to start using Pins.<br />
You can access the latest Kazoo for Windows, iOS or Android<br />
<br />
=====How do I set a Pin?=====<br />
<br />
In Kazoo, browse (or search) for the content you would like to pin, then click the "pin" icon under the "more" action. Clicking the "pin" icon will allow you to select a pin to assign the content to.<br />
<br />
=====How do I play a Pin?=====<br />
<br />
From Kazoo, select the Pin tile and then click the desired pin.<br />
<br />
From the DS remote, press and hold the pin number for 2 seconds.<br />
<br />
=====How do I provide feedback?=====<br />
<br />
We are interested in hearing about any issues you might have, but, we are particularly interested in hearing about issues around the setting and playback of a pin.<br />
<br />
You can provide us with feedback using the “Report to Linn” button (found in Kazoo under settings)<br />
</div><br />
<br />
=== Davaar 63 Build 223 (4.63.223) Released on 09 May 2018 <span class="mw-customtoggle-Davaar63"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar63"><br />
* Added support for Roon<br />
* Changes to support future cloud development (Linn Labs)<br />
* Fixed #5709: HLS Socket Leak<br />
* Fixed issue with TuneIn preset lists not always refreshing after changes<br />
* Fixed crash that was occurring occasionally when restarting HLS radio streams<br />
</div><br />
<br />
===Davaar 62 Build 200 (4.62.200) Released on 07 Mar 2018 <span class="mw-customtoggle-Davaar62"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar62"><br />
* Added support for new product variants with replacement flash devices<br />
* Fix for occasional dropouts reported on external sources<br />
* Fixed defect #5678: Changing track in 'track position' (X/Y) display mode doesn't refresh track position<br />
* Fixed defect #5682: ADS Renew handset skip fails after facdef<br />
* Fixed defect #5459: An Exakt Sub Box set to "MONO" on DS products with Exakt and without HDMI will now output a mono downmix<br />
* Fixed defect #5611: Analogue output test tones played via Konfig's "Speakers/Exakt" tab now work correctly on products without surround capabilities<br />
* Fixed #5659: Race condition in Exakt discovery<br />
</div><br />
<br />
=== Davaar 61 Build 196 (4.61.196) Released on 29 Jan 2018 <span class="mw-customtoggle-Davaar61"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar61"><br />
* Added support for Urika II<br />
* Fixed #5278 - Fix buffer overflow causing crash on Net Aux source<br />
* Fixed #5656 - Close network connections to music providers (NAS etc.) more quickly<br />
* Fixed #5211, #5617 - crash playing certain surround tracks<br />
* Fixed a number of relatively rare crashes when IP address changes<br />
</div><br />
<br />
=== Davaar 60 Build 193 (4.60.193) Released on 14 Dec 2017 <span class="mw-customtoggle-Davaar60"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar60"><br />
'''Features'''<br />
* Added support for DSD playback on Klimax DS/3(Mk4) and Klimax DSM/2(Mk3)<br />
** Supports DSD64 and DSD128<br />
** Supports DSF (with metadata) and DFF (raw data) formats<br />
** Uses Katalyst DAC on DS/DSM analogue outputs (not available on Exakt outputs)<br />
** If using Kazoo server, please upgrade to 4.8.5 or higher for DSD file support<br />
'''Bug Fixes'''<br />
* Rework of BBC radio streaming code to better handle intermittent connection issues<br />
* Added support for HTTPS radio streams (re-enables support for ALR Jazz and Absolute Radio)<br />
* Faster eventing of updates after skipping tracks or seeking<br />
* Improved Exakt device discovery time<br />
* Fix for crash on Airplay<br />
* Fix for rare crash involving Exakt and toggling Standby<br />
* Fix for crash scrolling non-ascii metadata<br />
* Fixed space optimisation for certain devices <br />
* Fixed #4752: BBC streams don't resume when network cable disconnected and re-connected<br />
* Fixed #4631 and #5427: Occasional crashes while on BBC radio streams<br />
* Fixed #5594: Dropouts when playing from phono source<br />
* Fixed #5548: Enable Songcast synchronisation when on Spotify source, via Songcast delay option<br />
* Fixed #5549: Fix no audio/volume control on first selection of Spotify source in certain setups<br />
* Fixed #4431 and #4655: Errors in web UI help text.<br />
* Fixed #5558: Handset does not stop internet radio playback<br />
* Fixed #5525: Analogue Sources set to Delay Mode-"Video Sync" on Klimax Exakt DSM do not have the IR sync adjust option<br />
* Fixed #5520: Klimax products source select failure<br />
* Fixed #5471: IR: Seek doesn't work on Sneaky family products<br />
</div><br />
<br />
=== Davaar 59 Build 185 (4.59.185) Released on 30 Aug 2017 <span class="mw-customtoggle-Davaar59"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar59"> <br />
* Added Spotify Connect support (Spotify Premium account required). See http://docs.linn.co.uk/wiki/index.php/SpotifyConnect<br />
* Fixed Calm Radio login failures for username or password containing certain non-alphanumeric characters<br />
* Fixed #4784: Bug in Net Aux implementation which can result in device lock-up when network issues encountered.<br />
* Fixed #5228/#5465: Songcasting mono streams results in playback at half speed on receiver.<br />
* Fixed #5261: Seeking backwards in certain AAC tracks would result in playback resuming at half speed.<br />
</div><br />
<br />
=== Davaar 58 Build 182 (4.58.182) Released on 15 Aug 2017<span class="mw-customtoggle-Davaar58"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar58"><br />
* Added support for Calm Radio<br />
* Added Transport service. Developers see [http://wiki.openhome.org/wiki/Av:Developer:TransportService Transport Service Documentation] for details.<br />
* Front panel now displays transport state on NetAux<br />
* Fix one possible cause of errors reading network time (which causes failures to play Qobuz tracks)<br />
* Fixed crash reading network time (during startup of Qobuz tracks)<br />
* Handle HTTP redirects for Calm Radio streams (used by some free streams).<br />
* Don’t display skip next/previous buttons for Calm Radio stations.<br />
* Fix #5449 – crash processing WAV files that report their length as zero.<br />
* Relax tests for validity of WAV files (MinimStreamer sometimes outputs a slightly corrupt header on WAV streams).<br />
</div><br />
<br />
=== Davaar 57 Build 178 (4.57.178) Released on 29 Jun 2017<span class="mw-customtoggle-Davaar57"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar57"> <br />
* Initial release for Sekrit DS<br />
</div><br />
<br />
=== Davaar 56 Build 177 (4.56.177) Released on 06 Jun 2017<span class="mw-customtoggle-Davaar56"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar56"><br />
* Fixed defect #5361: Proxy preamp connection causes DS to lockup on boot.<br />
* Improved handling of errors reading network time (may reduce problems with skipped or slow to start tracks from Qobuz)<br />
* Enable SDDP discovery for Control 4 integration to simplify developer tooling<br />
* Fixed defect #5300: KDSM (all variants) crash on spdif/tos selection when HDMI board disconnected<br />
* Fix for slow eventing from a DS (this may manifest as discovery problems)<br />
* Fix for crash processing a malformed search request (from an unknown third party control point)<br />
* Fixed defect #5295: HDMI2: Fix potential deadlock when switching between HDMI sources<br />
* Fixed defect #5287: Exakt: Front panel exclamation shows on valid stereo-only setup<br />
* Fixed defect #5281: Mute failing to fully mute (KDSM, Kiko)<br />
* Fixed defect #5265: Volume commands shouldn't affect Standby state if volume control is disabled<br />
* Fixed defect #5263: Sekrit DSM: No FP AMP or IR led operation<br />
* Fixed defect #5258: KDSM/2 front panel LED does not come on after power cycle<br />
* Fixed defect #5241: UI: Small volume value has right most pixels missing (when volume =100)<br />
* Fixed defect #5255: '&' character not shown on display (artist and composer fields)<br />
</div><br />
<br />
=== Davaar 55 Build 172 (4.55.172) Released on 30 Mar 2017 <span class="mw-customtoggle-Davaar55"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar55"><br />
'''Features'''<br />
* Added support for Surround Sound<br />
** See http://docs.linn.co.uk/wiki/index.php/Surround_Sound for details and setup instructions.<br />
** Added trim control for Centre/LFE channels. This is available using the IR handset and can be used to fine-tune the relative volume of these channels compared to other inputs channels. Trim is available regardless of whether Centre/LFE are output to dedicated speakers or down-mixed into the rest of a surround system.<br />
** Volume is automatically adjusted to account for any attenuation caused by down-mixing multi-channel (surround) inputs<br />
** Songcast sending of surround content is not supported<br />
** NOTE: this also requires a new version of Konfig (4.33 or higher)<br />
* Classic and Classic Movie Preamp proxies reinstated (no disc functionality)<br />
* Improved front panel preset navigation<br />
* Improved general layout on front panel<br />
'''Bug Fixes'''<br />
* Fixed #5245: HDMI output shows wrong HDMI source at startup<br />
* Fixed drop in volume on HDMI when device or source has volume control disabled<br />
* Fixed crash playing 192/24 with Space+ enabled, surround setup and a large difference in positions of Exakt and analog speakers <br />
* Fixed #5602: analogue channels not always immediately in sync for surround content after applying Space Optimisation+<br />
* Fixed crash playing digital inputs<br />
* Fixed #5202: Fix digital outs carrying audio when in surround mode.<br />
* Fixed #5211: Fix crash caused by radio metadata.<br />
* Fixed #5228: Fix potential hang when switching between surround/stereo input material.<br />
* Fixed audio output silence on Exakt only Klimax and Akurate DSM devices<br />
* New Exakt filters for surround mode subwoofers<br />
* Adjust volume to account for any attenuation caused by down-mixing multi-channel content<br />
* Fixed #5165: Fix bug resulting in some AIFF files failing to play<br />
* Fixed #5108: Add "Dual Analogue/Exakt" output option to DS products with Exakt<br />
* Fixed #5166: Remove "Dual Analogue/Exakt" output option from Exakt-only DSMs<br />
* Fixed #5102: Fix digital outs not working on DSMs with Exakt speakers connected<br />
* Fixed #5138:'Lipsync option missing on Analog in on KDSM with Exakt'<br />
* Fixed #5170:'Marantz handset commands are adjusting balance on DS/DSM'<br />
* Fixed #5150: Fix potential DS deadlock when setting up Exakt devices.<br />
* Fixed #5151: Fix setting of analogue delay.<br />
* Fixed #5121: Improve handling of mismatched speaker configurations.<br />
* Fixes downgrade issue when space optimisation is set. Devices with this issue will need to be updated to this beta release (4.55.166) before they can be downgraded.<br />
* Fixed #5114: Reselecting the same playlist track via handset doesn't restart track<br />
* Fixed #5135: Front panel source button does not work on some Akurate DS variants<br />
* Fixed #5124: Kiko fails to disable power amps in standby<br />
* Fixed #4703: Line-out muted on Majik DSi & DSM<br />
* Fixed #4744: Display "pulses"<br />
* Fixed #5106: Rem19 Amp->Left/Right key functionality clash with Klimax Kontrol<br />
* Fixed #5043: Kiko - headphones not fully muting speaker output<br />
* Fixed #5100: Crash caused by Exakt debugging which was affecting some users' DSs<br />
* Work towards #4686: Muting may now give a more gradual fade of audio<br />
* Fixed rare crash sending UPnP announcements<br />
* Work towards a rare crash dealing with drop-outs on digital inputs<br />
* Fixed #4836: Handset navigation of playlist by artist or album not implemented<br />
* Fixed #4855: tone issue on Kiko family (whistling)<br />
* Fixed #4098: incorrect display of lip sync range when Exakt devices are connected.<br />
* Fixed #5069: HDMI disable pass-through issue on HDMI1 products<br />
* Fixed #5070: Kiko help text timeout using wrong start point / too early<br />
* Reduced scroll rate on Kiko<br />
* Removed transport state display glitch on Kiko<br />
* Fixed #4990: handle 16KHz sample rate in products with surround support<br />
* Fixed #5045: HDMI disable not working<br />
* Fixed #5046: digital output mode selector missing on DS products<br />
* Fixed #5049: crash attempting to play 6 channel WAV file<br />
* Fixed #5050: crash on HDMI source<br />
* Fixed #5051: front panel scrolling interrupted by sleep<br />
* Fixed #5052, #5056, #5059: loss of audio when switching away from any SPDIF or TOSLINK input<br />
* Press and hold of Standby for 10 seconds on Ir remote will force a crash then reboot. This can be used to send information on DS state to Linn (in lockup cases).<br />
* Additional logging to help diagnose DS discovery issues<br />
* Fixed front panel glitches when skipping track etc<br />
* Fixed occasional crash going into standby from an active digital input<br />
* Fixed crash playing very long tracks on UPnP AV source<br />
* Fixed #4903: assertion in Exakt speaker delay handling<br />
* Fixed #4399: slow updating of Exakt speaker mappings. Symptom showed as audio playing from both speakers for ~5s when switching between speakers under test using Konfig.<br />
* Fixed #4927: crash coming out of standby, caused by Exakt.<br />
* Fixed #4929: assertion in ChannelMapManager.<br />
* Fixed #4938: crash in Exakt message regulator.<br />
* Fixed #4847: excessive memory usage by Exakt subsystem.<br />
* Fixed #4532: intermittent missed audio at start of playback when using Exakt.<br />
* Fixed #4532: Fixed issue where start of audio was intermittently missed when Exakt speakers used <br />
* Fixed #4292: LED display flickers on IR when IR disabled<br />
* Fixed #4495: VFD displaying exakt logo at all times<br />
* Fixed #4565: Front panel "no network" X indicator is in wrong position<br />
* Fixed #4579: VFD - not scrolling track info on standby exit<br />
* Fixed #4636: Left/Right nav keys on Rem19 do not auto repeat (lipsync control)<br />
* Fixed #4642: Restarting a track or playing the same track again doesn't scroll track data<br />
* Fixed #4707: Source +/- from handset should not change source on a DS<br />
* Fixed #4800: First playlist track not shown on display when playlist restarted<br />
* Fixed #4812: KDSM VFD Help menu scroll is tempramental<br />
* Fixed #4856: UI retains metadata after playlist is deleted.<br />
* Fixed #4876: Press and hold '*' key on handset does not toggle shuffle state<br />
* Fixed #4884: FP display being refreshed every 2-3 seconds on source information make product info requests from IR handset difficult<br />
* Fixed #4891: Skip on radio presets doesn't wrap<br />
* Fixed #4898: Display comes out of sleep when volume is changed by network control point<br />
* Fixed #4907: Press and hold of the remote "i" button should scroll the current track info on the display<br />
* Fixed #4913: UI: Standby logo not being cleared properly on standby exit<br />
* Fixed #4926: Radio station name not being scrolled unless display mode set to "Channel"<br />
</div><br />
<br />
=== Davaar 54 Build 135 (4.54.135) Released on 29 Nov 2016<span class="mw-customtoggle-Davaar54"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar54"><br />
* Added support for Sekrit DSM, Sneaky DSM and Kiko DSM<br />
* Added support for Roomamp 2 using RS232 control<br />
* Added support for updated privacy statement<br />
* Added separate Konfig options for crash and activity reporting<br />
* Fix selection of radio preset using handset numeric keys<br />
* Digital Output Mode set to 'Fixed Sample Rate 176/192' now always uses 192k<br />
* Reduced display sleep time to match Web Konfig help text<br />
* Fix rare hang when room name is changed<br />
* Fix Klimax DSM/2 updater<br />
* Re-instate crash reporting (fix regression)<br />
* Removed fix for defect #4851: Sleep mode still activates in Standby. The fix caused a hang in some cases.<br />
* Fixed defect #4843: LED products don't respond to standby enter commands from network<br />
* Fixed defect #4851: Sleep mode still activates in Standby<br />
* Fixed defect #4852: Kiko doesn't have option to disable front LED<br />
* Fixed defect #4742: WAV transcoded radio streams not playing<br />
* Fixed defect #4725: Occasionally AkurateDsMk2 variant without Spdif output starts up in fallback<br />
* Fixed defect #4437: Scroll stutter when using Play Now from Kazoo<br />
* Fixed defect #4638: Network source change causes very brief source pop up on UI<br />
* Fixed defect #4654: Front panel volume popup times out too quickly when volume changed via network<br />
* Fixed defect #4677: VFD displays wrong track title after scrolling<br />
* Fixed defect #4727: Front panel - no artist info when on Playlist source<br />
* Fixed defect #4751: Front panel displays artist of first track in playlist as current artist<br />
* Fixed defect #4760: Front panel shows some metadata fields as empty, and can't select static info type<br />
* Fixed defect #4791: If startup in sleep mode is disabled, on KDSM the volume isn't displayed.<br />
* Fixed defect #4797: Front panel gives no indication that the DS is performing post-standby work<br />
* Fixed defect #4799: Direct source selection from Standby takes approx 10secs to action.<br />
* Fixed defect #4822: Pressing balance on handset locks up Sneaky MDS with volume control disabled<br />
* Fixed defect #4823: Starting playlist in Kazoo with DSM in standby does not always bring the VFD out of standby<br />
</div> <br />
<br />
=== Davaar 53 Build 128 (4.53.128) Released on 03 Nov 2016 <span class="mw-customtoggle-Davaar53"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar53"><br />
* Fixed problem with optical input not consistently locking on<br />
* Fixed problems with Exakt reprogramming<br />
* Reverted source index numbers to match Davaar37 for universal remotes and custom installations<br />
* Added opt-out for crash and user data collection<br />
* Fixed various Mpeg4 related crashes<br />
* Exakt link LEDs are now disabled when DS in sleep mode to match Davaar37<br />
* DS now reports correct software update version<br />
* Fixed hang using airplay to DS when DS in sleep mode<br />
* Fixed occasional problem with no audio on TOSLINK inputs<br />
* Fixed problem with HDMI 1.0 pass-thru not operating on power-up<br />
* Fixed lockup on Airplay reconnect<br />
* Volume/Mute icons are no longer displayed when volume control is disabled<br />
* Direct source buttons from all handsets now working<br />
</div><br />
<br />
=== Davaar 52 Build 119 (4.52.119) Released on 11 October 2016 <span class="mw-customtoggle-Davaar52"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar52"><br />
* Relevant changes from Davaar 51 now applied to all other supported products<br />
* Worked around bug in Control4 driver. Control4 systems using the ExtraVegetables driver will work again.<br />
* Fixed most common device crashes based on user reports<br />
* Fixed selection of radio station/playlist track by number on handset<br />
* HDMI maintenance and improvements<br />
* Front panel maintenance and improvements<br />
</div><br />
<br />
=== Davaar 51 Build 115 (4.51.115) Released on 30 September 2016 <span class="mw-customtoggle-Davaar51"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar51"><br />
''Only available for Klimax DSM/1 devices''<br />
* Added support for Klimax DSM/1 Renew device<br />
* Fixes for some unplayable WAV and AIFF files.<br />
* Fix incorrect bitrate reported for some MP3 files.<br />
* Changed type reported by UPnP device. This fixes older builds of SkweezyDs but breaks the recent 4.1.3 build<br />
* Re-instated icon in UPnP device XML (Bubble DS should display a device icon again)<br />
* Fixes for new HDMI hardware<br />
* Fixes LED problem on Klimax Renew DSM<br />
</div><br />
<br />
=== Davaar 50 Build 110 (4.50.110) Released on 19 September 2016 <span class="mw-customtoggle-Davaar50"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar50"><br />
* Substantial internal changes, both to fix bugs and to enable future development<br />
* Improved clock recovery for DSM external digital inputs<br />
* Fixed crash on DHCP renewal<br />
* Simplified lip sync setup<br />
* Improved support for various codecs<br />
* Improved support for radio stations using HLS<br />
* Web Konfig page updated<br />
* ‘Report to Linn’ from Kazoo now includes logs from your DS<br />
<br />
A small number of features have been removed. If any of the following are very important to you, please stay on Davaar 37 for now.<br />
* Jukebox. (A replacement, with simplified setup, is planned.)<br />
* Third party AV receiver surround mode. (An improved replacement using Exakt is under development and coming soon.)<br />
* Control of CD player via a DS.<br />
<br />
This release is available for the following DS products:<br />
* Klimax – DS, DSM, Renew<br />
* Akurate – DS, DSM, Renew<br />
* Majik – DS, DS-I, DSM<br />
* Sneaky Music DS<br />
* Sekrit DS-I<br />
The following products will be added in a future release (hopefully very soon):<br />
* Sneaky DSM<br />
* Sekrit DSM<br />
* Kiko DSM<br />
<br />
Note that some third party control points do not fully support this release:<br />
* Lumin can report but not control the DS volume. This has been diagnosed and reported as a bug in the Lumin app so will be fixed by a later Lumin update.<br />
* Chorus DS cannot discover a DS running Davaar 50. This was diagnosed as a bug in Chorus. Sadly, its developer has passed away so a fix is unlikely.<br />
<br />
Several other control points, including [https://www.linn.co.uk/software#kazoo Kazoo], BubbleDS Next and Kinsky work as before so could be used to supplement or replace any control point that no longer functions.<br />
</div><br />
<br />
=== Davaar 37 Build 1671 (4.37.1671) Released on 09 May 2016 <span class="mw-customtoggle-Davaar37"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar37"><br />
* Fixed Swiss Radio (SRF 1/2/3) playback problem.<br />
</div><br />
<br />
=== Davaar 36 Build 1598 (4.36.1598) Released on 07 March 2016 <span class="mw-customtoggle-Davaar36"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar36"><br />
* Improvements made to start-up sequence of connected Exakt products.<br />
* Removed strict mime-type checking.<br />
* Attempted fix for lockup during HLS playback.<br />
</div><br />
=== Davaar 35 Build 1521 (4.35.1521) Released on 17 December 2015<span class="mw-customtoggle-Davaar35"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar35"><br />
* Fixed problem where certain DS devices with Exakt outputs would not boot with Davaar 34.<br />
</div><br />
<br />
=== REMOVED Davaar 34 Build 1484 (4.34.1484) Released on 26 November 2015<span class="mw-customtoggle-Davaar34"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar34"><br />
* Fixed occasional glitch during playback on certain products.<br />
* Allow MIME type application/ogg as a speical case. This caters for synlogy media server which reports this for ogg files, as well as certain FLAC based internet radio stations.<br />
</div><br />
<br />
=== Davaar 33 Build 1430 (4.33.1430) Released on 06 October 2015<span class="mw-customtoggle-Davaar33"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar33"><br />
* TuneIn changes to support new TuneIn tile in Kazoo<br />
* Fixed defect #3697: Akurate DS/0 plays silence after sample-rate change <br />
* Fixed defect #3696: Hissing sound from analogue outputs while product is booting up <br />
* Fixed defect #3695: Loud crack from analogue outputs when enabling/disabling Space (while music is playing) <br />
* Fix for Exakt reprogramming problems with certain DS/DSM devices <br />
* Fix for source change clicks with certain Exakt DS/DSM devices <br />
* Fix for playback issues with tracks from Kazoo Server <br />
* Fix for occasional HLS playback problems <br />
* Force DAC to mute in Exakt devices while programming<br />
* Exakt outputs are now muted prior to Exakt reprogramming<br />
* Added a workaround for the problem of DS's becoming undiscoverable<br />
<br><br />
</div><br />
<br />
=== Davaar 32 Build 1283 (4.32.1283) Released on 06 July 2015<span class="mw-customtoggle-Davaar32"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar32"><br />
* Fixed a problem with Qobuz getting into a state where nothing can be streamed. <br />
* Added support for BBC on demand content using HLS (for future streams). <br />
* Fixed audio mute issue on HDMI pass-through with Majik DSM. <br />
* Added support for Qobuz hi-res streams (192k/24bit and 96kHz/24bit). Currently these are only available on purchased content. <br />
<br><br />
</div><br />
<br />
=== Davaar 31 Build 1267 (4.31.1267) Released on 16 June 2015 <span class="mw-customtoggle-Davaar31"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar31><br />
* Fixes to support device production: new fallback firmware required.<br />
* Davaar 29 and 30 will no longer be available.<br />
<br><br />
</div><br />
=== Davaar 30 Build 1248 (4.30.1248) Released on 04 June 2015 <span class="mw-customtoggle-Davaar30"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar30"><br />
* Fixes to support device production. <br />
* Fixed defect #3690: HDMI pass through not working consistently.<br />
* Fixed defect #3645: Analogue Input levels for balanced inputs now default to 4V-RMS.<br />
* Fixed BBC world service radio failure using new HLS stream.<br />
* Fixed customer reported Qobuz crash on attempt to retrieve time from the NTP server.<br />
<br><br />
</div><br />
=== Davaar 29 Build 1216 (4.29.1216) Released on 18 May 2015<span class="mw-customtoggle-Davaar29"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar29"> ===<br />
* Initial release to support Qobuz streaming functionality on all DS and DSM devices.<br />
* Added HLS support for higher resolution BBC radio content (where available).<br />
* Exakt discovery enhancements.<br />
* Maintenance and bug fixes.<br />
<br><br />
</div><br />
=== Davaar 28 Build 1162 (4.28.1162) Released on 08 April 2015<span class="mw-customtoggle-Davaar28"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar28"><br />
* Fixed defect where Exakt outputs are not being muted when headphones are connected.<br />
</div><br />
=== Davaar 27 Build (4.27.1153) Released on 19 March 2015<span class="mw-customtoggle-Davaar27"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar27"><br />
* Fixed defect: Majik DS-I and Majik DSM/0 do not work with volume control disabled.<br />
</div><br />
=== Davaar 26 Build (4.25.1148) Released on 17 March 2015 <span class="mw-customtoggle-Davaar26"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar26"><br />
* Added Space Optimisation for Akurate DSM.<br />
</div><br />
=== Davaar 25 Build (4.25.1134) Released on 16 March 2015 <span class="mw-customtoggle-Davaar25"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar25"><br />
* Added Space Optimisation for all DS products (minus Akurate DSM).<br />
* Initial release for Klimax DS/2, Akurate DS/2, Majik DS/1 and Majik DSM/2.<br />
* No longer use the '0' handset key to change delay modes at an attempt to lip sync normalise (use Konfig instead).<br />
* Fixed Tidal login bug<br />
</div><br />
=== Davaar 24 Build (4.24.1066) Released on 14 January 2014 <span class="mw-customtoggle-Davaar24"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar24"><br />
* Fixed various long-term Tidal playback issues related to handling of bad tracks.<br />
</div><br />
=== Davaar 23 Build (4.23.1042) Released on 18 December 2014 <span class="mw-customtoggle-Davaar23"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar23"><br />
* Initial release to support [http://www.tidalhifi.com Tidal] streaming functionality on all DS and DSM devices.<br />
* Fixed the device discovery issue related to Bonjour where devices were becoming undiscoverable after around 3 weeks of on time.<br />
</div><br />
<br />
=== Davaar 22 Build (4.22.1006) Released on 26 November 2014 <span class="mw-customtoggle-Davaar22"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar22"><br />
* Intial release for Akurate Renew DSM, Klimax Renew DSM, and Akurate Renew DS/1.<br />
* Fixed defect #3600: Exakt outs not muted with headphones on - Akurate DSM/1.<br />
* Exakt back panel LEDs on DS are now turned off in Standby.<br />
* Fixed defect #3640: Exakt: DSM crashes when Konfig is closed while DSM is in speaker discovery phase.<br />
* Fixed #3642: UI: buffering spinner visible during exakt reprog.<br />
</div><br />
<br />
=== Davaar 21 Build (4.21.936) Released on 10 November 2014 <span class="mw-customtoggle-Davaar21"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar21"><br />
* Fixed defect #3637: Toslink sample rate family changes not working over ExaktLink.<br />
* Fixed defect #3630: Exakt: Channel map on speakers and crossovers should default to 'OFF'.<br />
* Fixed defect #3632: On standby exit, Exakt should ramp audio once.<br />
* Fixed defect #3638: UI corruption whilst reprogramming Exakts.<br />
* Exakt back panel LEDs now behave consistently accross the product range.<br />
</div><br />
<br />
=== Davaar 20 Build (4.20.916) Released on 23 September 2014 <span class="mw-customtoggle-Davaar20"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar20"><br />
* REQUIRED for compatability with latest Exakt firmware releases.<br />
* Klimax DSM/1: Exakt LED's now go On or Off according to the configuration setting.<br />
* Fixed defect #3635: Exakt: Klimax DSM/1 continually reboots at startup when connected to Klimax 350 speakers.<br />
* Fixed defect #3603: Internal volume control 'Off' not working on Akurate Exakt DSM.<br />
* Fixed defect #3609: No HDMI audio output when DSM devices are configured with 'Startup Mode' as 'Active'.<br />
* Fixed #3621: DS crashes trying to play tracks created by StationRipper.<br />
* TuneIn fix: certain stations that present unplayable url's followed by playable url's (in the original list returned from TuneIn) will now work.<br />
* Exakt devices can now be interrogated and programmed while DSM is in standby.<br />
* Fixed defect #3612: HDMI: changing source DelayMode causes loss of audio.<br />
* TuneIn fix: preset xml was occasionally being corrupted (causing preset navigation to behave unpredictably).<br />
* Fixed problem with non-raw SPDIF and <44.1k Exakt outputs being 6dB too low.<br />
* Fixed #3618: (UpnpAv) DS reboots when seeking in non-seekable stream.<br />
* Fixed #3611: Multichannel DVD audio with Davaar 19 has no surround channels.<br />
</div><br />
<br />
=== Davaar 19 Build 799 (4.19.799) Released on 08 July 2014 <span class="mw-customtoggle-Davaar19"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar19"><br />
* Initial release for the Klimax Renew DS (with support for Klimax DS/1).<br />
* Fixed defect #3533: DSM products will not boot if HDMI is disabled.<br />
* Fixed defect #3607: Variable delay not set correctly on initialisation.<br />
* Fixed defect #3600: Exakt outs not muted with headphones (Akurate DSM/1).<br />
* Fixed defect #3603: Internal volume control on Akurate Exakt, Akurate DSM/1 and Klimax DSM/1 now boot properly after disabling internal volume control.<br />
* Fixed problem with SPDIF (100ms latency in applying status change mute).<br />
* Fix to ensure the DSM does not respond to source change requests for invisible sources when in standby (when using the direct source codes).<br />
* Fixed responsiveness problem when browsing TuneIn folders using the handset.<br />
* Added Assert if spartan 6 programming fails on bootup.<br />
* Fixed crash on DSM devices when HDMI "Disabled In Sleep" is enabled.<br />
* PLEASE NOTE: Renew DS has been renamed Klimax Renew DS. Renew DS owners wanting to roll back to older versions of firmware will need to manually rename the variant folder in the older firmware to match the new model name (i.e. rename 'RenewDs' folder to 'KlimaxRenewDs'). Klimax DS Mk2 devices that have been renewed should not be rolled back as they will not boot.<br />
* PLEASE NOTE: Most products have not been updated since Davaar 14. For these products, all relevant changes described in Davaar 15-18 are included in the Davaar 19 release.<br />
</div><br />
<br />
=== Davaar 18 Build 754 (4.18.754) Released on 04 June 2014 <span class="mw-customtoggle-Davaar18"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar18"><br />
* Initial release of the Klimax DSM with Exakt Link.<br />
* Initial release of the Akurate DSM with Exakt Link.<br />
* Fixed defect #3566: HDMI: Audio cracks/pops when changing sample rate.<br />
* Fixed defect #3569: Certain MP3 files report incorrect duration.<br />
* Fixed defect #3589: Exakt Connection Status change events are sent out repeatedly.<br />
* Fixed defect #3597: Analog path gain correction is being applied to Exakt outputs. <br />
* Fixed defect #3568: Out-of-sync audio with Exakt to NonExakt songcast after clock multiplier change.<br />
* Fixed error in time of flight optimisation in Exakt systems.<br />
* Variable delay mode: Songcast sync will now occur at 160ms and higher rather than 250ms and higher.<br />
* Provide feedback on VFD when Exakt programming is in progress.<br />
* Radio playback: made pls file check slightly less strict to cope with a user reported station that didn't work.<br />
</div><br />
<br />
=== Davaar 17 Build 715 (4.17.715) Released on 29 April 2014 <span class="mw-customtoggle-Davaar17"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar17"><br />
* Updates to support Akubarik Exakt speaker upgrades.<br />
* Fixed defect #3565: HDMI: No audio on reselecting HDMI source with 32k stream present.<br />
* Improved super-tweeter drive unit model for all Exakt crossovers.<br />
</div><br />
<br />
=== Davaar 16 Build 694 (4.16.694) Released on 22 April 2014 <span class="mw-customtoggle-Davaar16"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar16"><br />
* Initial release for the Akurate Exakt DSM and the Exakt Akubarik speakers.<br />
</div><br />
<br />
=== Davaar 15 Build 647 (4.15.647) Released on 06 March 2014 <span class="mw-customtoggle-Davaar15"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar15"><br />
* Includes crossovers for Akurate 242 and Akubarik with Klimax Exakt Tunebox.<br />
* Added Single Ended crossover design files for Akurate 242, Akubarik, and Komri for use with the Klimax Exakt Tunebox.<br />
* Fixed defect #3558: Exakt Device List shows wrong version number after updating Tunebox.<br />
* Added fast flashing dim indicator on front of Klimax Exakt 350E and Tunebox for hardware fault conditions, eg overtemp.<br />
* Implemented 6db difference in the Klimax 350 single ended crossover compared to the balanced version.<br />
* Fixes for songcast receiver stability and synchronisation with Exakt systems. Fixed Songacst delay is now 150ms. Variable delay can now be set to lower than 100ms (Songcast sync if variable delay is >=250ms).<br />
* Added input signal detection and optional keep-awake tone generation for all Exakt crossovers, fixing amplifier power off problems.<br />
* Improved bass handling in the crossover domain.<br />
* Improvement to empirical drive unit inductance model (with regards to compenstation for drive unit variations).<br />
* Fixed problem with Exakt discovery eventing when disconnecting/connecting link cable.<br />
* Fixed audio thump on second crossover/speaker in Exakt link daisychain.<br />
</div><br />
<br />
=== Davaar 14 Build 549 (4.14.549) Released on 28 November 2013 <span class="mw-customtoggle-Davaar14"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar14"><br />
* Initial release for the Klimax Exakt Tunebox (with support for Klimax 350 and Komri speakers)<br />
* Fixed Airplay connection issue for Mac users on iTunes 11.1<br />
* Fixed problem that was causing high jitter on all sources for Kiko DSM, Sneaky DSM, and Sekrit DSM. This fix will provide an improvement in audio quality (for these products only)<br />
* Fixed room correction issues for Exakt<br />
* Fixed issue with an Exakt device being used as a Songcast receiver going out of sync with the Songcast sender<br />
* Fixed issue with an Exakt device crashing if more than 20 unique crossovers have been discovered since factory reset<br />
* Added support for right to left text on the front panel display<br />
* Fixed defect #3535: Line-out channels reversed on Sekrit/Sneaky DSM<br />
* Klimax DSM and Klimax Exakt DSM: front panel display will now dim in standby<br />
* PLEASE NOTE: Klimax DSM now requires Konfig 4.11.8 or higher for firmware updates<br />
</div><br />
<br />
=== Davaar 13 Build 469 (4.13.469) Released on 26 September 2013 <span class="mw-customtoggle-Davaar13"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar13"><br />
* Initial release for the Klimax Exakt DSM and the Klimax Exakt 350 speakers<br />
</div><br />
<br />
=== Davaar 12 Build 357 (4.12.357) Released on 1 July 2013 <span class="mw-customtoggle-Davaar13"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar13"><br />
* Fixed defect #3449: Songcast causes Akurate DS to lock up<br />
* Fixed defect #3448: DSM - No Audio with Hdmi Sleep mode set to yes.<br />
* Fixed defect #3453: Songcast causes DS (with proxy) to become undiscoverable<br />
* Fixed defect #3293: Input level is adjustable on phono type sources <br />
* Fixed defect #3388: Digital output is not muted in standby <br />
* Fixed defect #3392: Startup source ignored after power cycle if Front Aux connected / Active startup mode <br />
* Fixed defect #3393: HDMI "Turn off in sleep mode" not working on Sneaky, Sekrit and Kiko <br />
* Fixed defect #3395: HDMI bypass issue on Majik DSM :Front Aux <br />
* Fixed defect #3422: Variable delay is incorrect when switching from Radio/Playlist to Analog input <br />
* Fixed defect #3423: Thai characters displayed incorrectly on front panel display <br />
* Fixed defect #3424: Jukebox: If you add a Presets Folder URL with the NAS username:password the DS reports an error <br />
* Fixed defect #3430: Songcast app causes DS to be undiscoverable <br />
* Fixed defect #3432: DelayManager reporting DelayEnabled as true in Fixed mode <br />
* Fixed defect #3433: Lip sync cannot be controlled from REM020 handset<br />
</div><br />
<br />
=== Davaar 11 Build 5 (4.11.5) Released on 21 February 2013 <span class="mw-customtoggle-Davaar11"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar11"><br />
* Initial release for Sneaky DSM<br />
* Fixed defect: HDMI lockup issues<br />
* Fixed defect: Akurate DSM/Klimax DSM: balance on analog inputs is reversed<br />
* Fixed defect: Majik DSM: loss of HDMI audio after changing HDMI "Audio Mode" while in Standby<br />
* Fixed defect: Pop on analog out on Sekrit DSM<br />
* Added parameter to enable/disable from panel buttons<br />
* Added display sleep mode parameter to remaining models (single led devices: Renew DS, Akuarte Renew DS, Sneaky Music DS)<br />
* Device xml serial number field now contains the product ID, the product ID is then reflected in the device UDN as well. This will impact any contol point that caches device UDN numbers: you will be forced to re-discover your device.<br />
* Reduced brightness of Sekrit DSM LED's<br />
* Device will now send crash data automatically on power on (if avaialble). This functionality is on by default, but can be turned off using the corresponding config parameter<br />
</div><br />
<br />
=== Davaar 10 Build 2 (4.10.2) Released on 11 December 2012 <span class="mw-customtoggle-Davaar10"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar10"><br />
* Initial release for Sekrit DSM<br />
</div><br />
<br />
=== Davaar 9 Build 7 (4.9.7) Released on 22 October 2012 <span class="mw-customtoggle-Davaar9"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar9"><br />
* Fixed occasional thud coming out of standby on Majik DSM<br />
* Fixed bug in web config where apostrophe character could not be used in room name<br />
* Fixed defect: Songcast fails to play on sender switch<br />
* Fixed defect: DS to DS Songcast, receiver has silent gap at track boundary (during gapless playback)<br />
* Added configuration option to disable ethernet leds<br />
* Added configuration option for Kiko led visibility in sleep mode<br />
* Added on device check for matching firmware and hardware variants. If mistmatched firmware is loaded onto a device, it will no longer boot.<br />
* Fixed defect: Digital inputs intermittently staying muted<br />
* Fixed defect: Noise when playing studio master files on Kiko DSM<br />
* Fixed defect: First stage of up-sampling was being bypassed at certain sample rates in some products.<br />
* Fixed defect: Device crash on attempting to play BBC Listen Again content<br />
* Fixed lip sync anomaly when AV latency equaled lip sync<br />
</div><br />
<br />
=== Davaar 8 Build 5 (4.8.2) Released on 26 July 2012 <span class="mw-customtoggle-Davaar8"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar8"><br />
* Initial release for Akurate Renew DS<br />
* Includes support for Akurate DS/0 upgrades<br />
</div><br />
<br />
=== Davaar 7 Build 5 (4.7.5) Released on 05 July 2012 <span class="mw-customtoggle-Davaar7"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar7"><br />
* Songcast resend functionality: reduced occurrence of audio dropouts when running over some wireless networks<br />
* Net Aux disconnect/reconnect robustness improvements, including timeout if sender disconnects from network<br />
* Add retry fix to solve dropout problems when using Net Aux<br />
* Increased maximum HDMI AV Latency from 100ms to 500ms<br />
* Volume control can now be enabled/disabled on Klimax DSM, Akurate DSM, Majik DSM, Majik DS-I, and Sekrit DS-I<br />
* Added configuration option to turn auto selection of the Net Aux source on or off<br />
* Fixed defect: Dolby Digital Stream not muted on Hdmi input (all DSM products)<br />
* Fixed defect: Crash on Radio plyback (Japanese default list of stations)<br />
* Fixed defect: Surround volume stuck on maximum after a power cycle<br />
* Fixed defect: Distortion on surround/center channels<br />
* Fixed defect: Majik DSM device crash when HDMI is disabled<br />
* Fixed defect: HDMI 'crackle' problem<br />
* Konfig: installer now checks for .Net 4<br />
* Konfig: HDMI options now visible on MAC<br />
* Default source names now all uppercase (HDMI, SPDIF, TOSLINK)<br />
* Balance setting is no longer applied when headphones are active<br />
* Majik DSM (HDMI) main board now powered down in Standby<br />
* Added audio check functionality: press and hold the help key (or # key) on remote with device in standby and network cable removed (and device power cycled) to trigger the audio check.<br />
</div><br />
<br />
=== Davaar 6 Build 4 (4.6.4) Released on 17 April 2012 <span class="mw-customtoggle-Davaar6"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar6"><br />
* Initial release for Majik DSM Mk2 (HDMI)<br />
* Konfig: added support for new HDMI parameters on Majik DSM Mk2 (HDMI)<br />
* Konfig: HDMI options now visible on MAC<br />
</div><br />
<br />
===Davaar 5 <span class="mw-customtoggle-Davaar5"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar5"><br />
==== Davaar 5 Build 3 (4.5.3) Released on 14 December 2011 ====<br />
* Supports third party streaming protocol via the Net Aux source<br />
* Fixed bug on Klimax DSM: surround audio was not being passed through correctly to downstream AV receiver<br />
<br />
==== Davaar 5 Build 2 (4.5.2) Released on 12 December 2011 ====<br />
* Supports improved integration of DSM Systems with third-party surround sound systems (See [[HDMI_Setup|Setup documentation]])<br />
* Device lockup problems fixed (may result in device reboot instead)<br />
* Added support for seek on new [[REM_020| slimline handset]] using left and right navigation keys<br />
* Added support for stop on new [[REM_020| slimline handset]] using press and hold of pause key<br />
* Maintenance and bug fixes<br />
<br />
==== Davaar 5 Build 1 (4.5.1) Released on 16 November 2011 ===<br />
* Includes unreleased functionality from Davaar 4 beta for Akurate DSM and Majik DSM<br />
* Fixed intermittent Songcast dropouts on high bit-rate streams<br />
</div><br />
<br />
===Davaar 4<span class="mw-customtoggle-Davaar4"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar4"><br />
==== Davaar 4 Build 2 (4.4.2) Released on 1 November 2011 ====<br />
* Provides support for [http://oss.linn.co.uk/trac/wiki/Songcast Songcast app], which allows you to send any audio from your computer to your Linn DS player and get better sound from your music services and web pages<br />
* Fixed noise burst coming out of standby after power cycle<br />
* Fixed Majik DS-I clicks and pops when changing source (pre-out, speaker-out, and headphone-out)<br />
* Fixed problem where Kinsky volume can get out of step with Klimax Kontrol when startup volume is used<br />
* Changed clock used when Klimax DS Mk2, Majik DS-I, or Akurate DS Mk2 are receiving Songcast<br />
* External input track information (sample rate, etc) is now available on the device display<br />
* Source direct and video settings merged into source delay mode setting for simplicity<br />
* Added device update notifications setting (on or off)<br />
</div><br />
<br />
===Davaar 3<span class="mw-customtoggle-Davaar3"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar3"><br />
==== Davaar 3 Build 3 (4.3.3) Released on 29 September 2011 ====<br />
* Fixed Majik DS-I click when changing source<br />
* Fixed volume discrepancy between analog source direct and indirect modes<br />
* Removed clock change when Klimax DS Mk2, Majik DS-I, or Akurate DS Mk2 are receiving Songcast<br />
<br />
==== Davaar 3 Build 2 (4.3.2) Released on 12 September 2011 ====<br />
* Changed clock used when Klimax DS Mk2, Majik DS-I, or Akurate DS Mk2 are receiving Songcast<br />
* Fixed rare Songcast failure<br />
* Improved Web configuration<br />
* Konfig: fixed discovery lockup problem for users running Vista and Norton<br />
<br />
==== Davaar 3 Build 1 (4.3.1) Released on 11 August 2011 ====<br />
* Potential fix for DS lockup and discovery issues<br />
* DHCP compliance and robustness improvements<br />
</div><br />
<br />
=== Davaar 2 Build 1 (4.2.1) Released on 04 August 2011<span class="mw-customtoggle-Davaar2"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar2"><br />
* Improved handling of low sample rate streams (32kHz and below).<br />
</div><br />
<br />
===Davaar 1<span class="mw-customtoggle-Davaar1"><code style="color: blue; font-size:88%;">{{Menu:expand}}</code></span> ===<br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-Davaar1"><br />
==== Davaar 1 Build 10 (4.1.10) Released on 27 April 2011 ====<br />
<br />
* Fixed defect that was causing the startup source activation to be inconsistent (source applied out of standby alternating between startup source and last used source)<br />
<br />
==== Davaar 1 Build 9 (4.1.9) Released on 26 April 2011 ====<br />
<br />
* Fixed #3163 - Device crashes after long pause<br />
* Fixed #3166 - Songcasting Sekrit TOS input fails intermittently<br />
<br />
==== Davaar 1 Build 8 (4.1.8) Released on 21 April 2011 ====<br />
<br />
* Fixed #3160: Search within a track causes an assert<br />
* Fixed #3161: Sender switching source w/o clock change gives no audio on rcvr<br />
* Fixed #3162: Assert - Thread.cpp 353: on startup on DS-I (semaphore count exceeded)<br />
* Fixed problem with audio glitch outputs immediately prior to start of audio when switching to a non direct external source<br />
<br />
==== Davaar 1 Build 7 (4.1.7) Released on 20 April 2011 ====<br />
<br />
* Fixed #3136: 'Click' switching from Playlist to Songcast on Klimax DS<br />
* Fixed #3156: Receiver lockup after sender power cycled<br />
* Webconfig now supports full range of configuration parameters<br />
<br />
==== Davaar 1 Build 6 (4.1.6) Released on 12 April 2011 ====<br />
<br />
* Added support for [[Songcast]] Large-scale mode ([[Songcast]] Sender Output Mode -> [[Multicast_Filtering|Multicast]])<br />
* Improved Songcast clock synchronisation<br />
* Fixed #3144: Songcast (multicast) - add receiver and ALL receivers scroll metadata<br />
* Fixed #3147: Potential lockup of device on removal of Songcast receiver<br />
* Fixed songcast receiver buffering when sender paused. Now reports waiting.<br />
<br />
==== Davaar 1 Build 5 (4.1.5) Released on 24 March 2011 ====<br />
<br />
* Fixed defect #3135: Songcast not songcasting Sekrit DS-I external inputs<br />
* Fixed defect #3119: Hiss on analogue sources<br />
* Fixed defect #3136: 'Click' switching from Playlist to Songcast on Klimax DS<br />
* Fixed defect #3138: Noise burst/click when selecting jukebox preset while playing<br />
* Balance configuration added to Konfig<br />
* Current delay preset selection added to Konfig<br />
* Majik DS-I TOS link output light now goes off when the output is disabled<br />
* Added extra headroom in up-sampling filter<br />
* Konfig: Restore to factory defaults now requires user confirmation<br />
* Sender preset number is now in the description field of the sender metadata (previously appended to start of name)<br />
* Beta documentation can be found here: http://docs.linn.co.uk/wiki/index.php/Beta:DsDavaar<br />
<br />
==== Davaar 1 Build 3 (4.1.3) Released on 17 March 2011 ====<br />
<br />
* Initial beta release of Davaar<br />
* Added [[Songcast|Songcast]] functionality. Songcast allows a DS to tune into another DS. A DS can songcast to more than one DS. Further, a DS can songcast no matter what source is selected.<br />
* Added OpenHome compatibility. OpenHome is an independent standard for networked home devices. Linn's DS devices are now fully compatible with the OpenHome Audio Visual (AV) specification. OpenHome AV compatibility will allow the DS to interoperate with other manufacturer's digitial streaming products and control points. <br />
* Added Auto play functionality (via Konfig option)<br />
* Added ability for device to power up into or out of standby (via Konfig option)<br />
* Requires latest Davaar beta version of [http://products.linn.co.uk/VersionInfo/Downloads/Beta Linn Konfig] to update (Available for Windows, Mac, and Linux platforms).<br />
* Requires latest Davaar beta version of [http://oss.linn.co.uk/trac/wiki/KinskyDesktop KinskyDesktop] to to control your device once it has been updated (Available for Windows, Mac, and Linux platforms). <br />
* Added ability to choose a fixed sample rate on digital outputs (88/96kHz or 176/192kHz)<br />
* Fixed digital output downsampling from 176/192kHz<br />
* Minimum lip sync delay is now 100ms<br />
* Added source 'Direct' functionality to allow external sources to achieve a zero latency delay (via Konfig option)<br />
* Fixed standby lockup issue<br />
* Various maintenance and bug fixes<br />
* Beta documentation can be found here: http://docs.linn.co.uk/wiki/index.php/Beta:DsDavaar<br />
</div><br />
<br />
__NOTOC__</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Beta:DsDavaar75:Release_Notes&diff=21945
Beta:DsDavaar75:Release Notes
2020-01-10T09:09:12Z
<p>Simonc: DSP -> surround module</p>
<hr />
<div>==Davaar 75 Build 345 (4.75.345) Released on 09 Jan 2020 ==<br />
===New features===<br />
* Wifi network connectivity for Selekt (will work on all existing Selekt devices)<br />
* Bluetooth audio playback for Selekt (will work on all existing Selekt devices)<br />
* Configurable SPDIF input/output for Selekt (will work on all existing Selekt devices on SPDIF 1 connector)<br />
* MPEG2 AAC support for Selekt with surround module and Core 1 products with HDMI 2.0 and surround module<br />
* Mono downmix support for all Selekt variants<br />
<br />
===Bug fixes===<br />
* Revert UPnP version to 1.0 (makes no change to any known control point)<br />
* Updated security libraries (fixes some rare crashes)<br />
* Improvements to reading TuneIn favourites<br />
* Updates to Qobuz usage reporting<br />
* Fixed (rare) repeating crash with very long Tidal or Qobuz user name<br />
* Improvements to some edge case behaviour shuffling a playlist<br />
* Fixed Selekt crash moving from HDMI to SPDIF/ TOSLINK source</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Beta:DsDavaar75:Release_Notes&diff=21942
Beta:DsDavaar75:Release Notes
2020-01-09T16:15:36Z
<p>Simonc: Tweaked build number</p>
<hr />
<div>==Davaar 75 Build 345 (4.75.345) Released on 09 Jan 2020 ==<br />
===New features===<br />
* Wifi network connectivity for Selekt (will work on all existing Selekt devices)<br />
* Bluetooth audio playback for Selekt (will work on all existing Selekt devices)<br />
* Configurable SPDIF input/output for Selekt (will work on all existing Selekt devices on SPDIF 1 connector)<br />
* MPEG2 AAC support for Selekt with DSP module and Core 1 products with HDMI 2.0 and DSP module<br />
* Mono downmix support for all Selekt variants<br />
<br />
===Bug fixes===<br />
* Revert UPnP version to 1.0 (makes no change to any known control point)<br />
* Updated security libraries (fixes some rare crashes)<br />
* Improvements to reading TuneIn favourites<br />
* Updates to Qobuz usage reporting<br />
* Fixed (rare) repeating crash with very long Tidal or Qobuz user name<br />
* Improvements to some edge case behaviour shuffling a playlist<br />
* Fixed Selekt crash moving from HDMI to SPDIF/ TOSLINK source</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Linn_DS/DSM_control&diff=21723
Linn DS/DSM control
2019-12-13T10:07:15Z
<p>Simonc: Clearer statement of control options</p>
<hr />
<div>__toc__<br />
=Kazoo user guides=<br />
:<span class="mw-customtoggle-KazooControlWindows"><u>'''> Windows'''</u></span><br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-KazooControlWindows"><br />
:::[[Kazoo User Guide for for Windows and iMac | Kazoo User Guide for for <b><u>Windows7</u></b>]]<br />
<br />
:::[[Kazoo User Guide for Windows 8 onwards & iMac 10.11 onwards | Kazoo User Guide for <b><u>Windows 8/10</u></b>]]<br />
</div><br />
<br />
:<span class="mw-customtoggle-KazooControlApple"><u>'''> APPLE MAC'''</u></span><br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-KazooControlApple"><br />
:::[[Kazoo User Guide for for Windows and iMac | Kazoo User Guide for for iMac up to <b><u>Yosemite (10.10)</u></b>]]<br />
<br />
:::[[Kazoo User Guide for Windows 8 onwards & iMac 10.11 onwards | Kazoo User Guide for iMac <b><u>El Capitan (10.11 >) onwards</u></b>]]<br />
</div><br />
<br />
:<span class="mw-customtoggle-KazooControliPad"><u>'''> iPhone/iPad'''</u></span><br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-KazooControliPad"><br />
:::[[Kazoo User Guide for Apple iPad/iPhone|Kazoo User Guide for <u>Apple iPad/iPhone</u>]]<br />
</div><br />
:<span class="mw-customtoggle-KazooControlAndroid"><u>'''> Android'''</u></span><br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-KazooControlAndroid"><br />
:::[[Kazoo User Guide for Android|Kazoo User Guide for <u>Android</u>]]<br />
</div> <br />
<br />
;* [[FAQ-Kazoo|<b>Common Kazoo questions</b>]]<br />
<br />
;* [[General_product_control_issues|<b>Common Product control issues</b>]]<br />
<br />
=IR Handsets=<br />
{{IR Handsets}}<br />
<br />
<br />
<br><br><br />
<br />
=PINS=<br />
{{GUIDE:PINS - What are they and how do I use them}}<br />
<br />
<u>'''IR Remote control PIN use'''</u><br />
<br />
The [[REM 022|<u>REM 022 IR handset</u>]] has six direct selection PIN buttons<br />
{{GUIDE:PINS_BEFORE_REM022}}<br />
<br />
{{INFO:PIN Information}}<br />
<br />
=Alexa=<br />
{{Control:Alexa}}<br />
<br />
=PC/MAC/Android/IOS Control software=<br />
{{Control:Linn_Control_Software}}<br />
<br />
=3rd Party controllers (AMX/Crestron/Control4/RAKO)=<br />
Released in Feb 2017 for use with ''' 'Kazoo Server (4.7 or later)' ''':<br><br />
{{INFO:Control4_Ctrl}}<br />
<br />
{{INFO:Crestron_Ctrl}}<br />
<br />
<!--Click the button below to register your interest and get started with the sign-up process, and a Linn Business Representative will be in touch. <br />
[mailto:crestron.control4@linn.co.uk Register interest] --><br />
<br />
<br />
===Other modules:===<br />
{{INFO:Other_Ctrl}}<br />
<br />
=SPOTIFY CONNECT=<br />
[https://www.spotify.com/uk/connect/ <u>Spotify Connect</u>] can now be used on Linn products from Davaar59 or later firmware.<br />
This allows you to select and Play your Spotify music on your Linn DS/DSM players and use the internal volume control on the Linn DS/DSM.<br><br><br />
To connect up your Spotify account to the Linn DS/DSM:<br />
:# On your control device, iPad/Android/PC/MAC etc, connect to the same computer network as you Linn DS/DSM<br />
:# Start your Spotify app, (if it is already open then close the App, wait a few seconds, and open the App)<br />
:# Now check the Spotify Speakers icon to find your Linn DS. (In some cases you may have to power cycle your Linn DS/DSM/HUB before this is seen)<br />
:# Select you Linn product and you can now play to the Linn DS/DSM/HUB from the Spotify account and control the Linn DS/DSM/HUB volume.<br />
<br />
This is web controlled and if your LInn DS/DSM has already been paired with your Spotify account you will be able to control even if you are not on the same ethernet network.(So be careful that if you accidentally select the Linn DS/DSM/HUB as a Spotify speaker and put the volume up high and you are not at home)<br><br />
<br />
=[https://roonlabs.com/index.html ROON]=<br />
<p>The Linn DS/DSM requires Davaar63 or later to work with Roon V1.5 and above.<br><br><br />
The Linn DS/DSM is a "''Roon Tested network player''"<br><br />
This allows full hi-res audio, (192k/24bit) playback controlled by the <u>[https://roonlabs.com/partners/linn.html Roon system]</u><br><br />
Songcast is used to share audio between Linn Products when using Roon. It does not use RAAT (Roon Advanced Audio Transport) for sharing Music so cannot be setup as a Roon-Ready sharer.</p><br><br />
<br />
;<u>Setup</u><br />
On Linn DS proxy setups, Linn DS with Linn Kontrol preamplifer connected with RS232, the Roon volume control will not control the Linn Kontrol volume. This will only work with Linn DSM or Linn DS with internal volume control disabled.<br><br />
A Roon HUB is required in your network system to allow Roon to control your Linn DS/DSM.<br><br />
ENABLE the Linn DS/DSM player in the Roon - Settings - Audio - '''NETWORKED''' section.<br />
<br><br><br />
<br />
;<u>Control</u><br />
Primary control is through Roon.<br />
<br>Transport (play / pause / stop) and Volume can be controlled using Kazoo or Ir handset.<br />
<br><br><br />
<br />
;<u>Issues</u><br />
{{FAQ;Roon_FAQ}}<br />
<br />
=Knekt BASIK3 RCU=<br />
<br><br><br />
{| width="100%" cellspacing="0" cellpadding="0" border="0" align="center" class="FCK__ShowTableBorders"<br />
<br />
<!--| width="50%" align="center" |--><br />
| width="20%" align="center" | [[image:BASIK-3_backpanel.png|400px|BASIK-3-RCU]]<br />
<!--| width="20%" align="center" | [[image:BASIk3-IR-RightS.jpg|100px| BASIK-3-IR RCU]]--><br />
| width="40%" align="left" | These can only be used with the [[Sneaky Music DS]], [[Sekrit_DS|Sekrit DS]], [[Sekrit DS-I]] and [[Sekrit DSM]] Accessory RC5 socket. This must be wired with [http://docs.linn.co.uk/wiki/images/6/6d/KNEKT_CAT5_wiring.pdf Knekt CAT-5 wiring]<br><br>These wall mounted control units will give push button control of Sleep state and Volume +/-. Ensure that "Auto Play" is enabled in Konfig<br><br> The tear-drop shaped BASIK-3-IR also has an IR receiver to allow IR handset control of the Linn DS/DSM<br><br>Jumper link should be removed for Sneaky/Sekrit DS/DSM operation. (On Basik-3-IR, IR link can be in state required).<br />
|}<br />
<br />
<br><br><br />
<br />
<br />
<!--<br />
[[Image:REM020.png|left|15px]]<u>''' IR Handsets'''</u><br><br><br><br><br><br />
:<span class="mw-customtoggle-REM022"><u>'''> REM022'''</u></span><br />
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-KazooControlWindows"><br />
::{{Guide:REM022}}<br />
</div><br />
<br />
<br />
===REM 020 owners manuals===<br />
{{Guide:REM020}}<br />
<br />
<br />
===REM 019 owners manuals===<br />
{{Guide:REM019}}<br />
<br />
===AV5101 Remote Handset===<br />
{{Guide:AV5101}}<br />
<br />
<br />
===CD12 Learning Remote Handset===<br />
{{Guide:CD12_Learning_Handset}}--><br />
<br />
[[Category:FAQ's]]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=ThirdPartySoftwareCopyright&diff=21214
ThirdPartySoftwareCopyright
2019-10-22T11:15:05Z
<p>Simonc: </p>
<hr />
<div>= Third Party Software Copyright Information =<br />
<br />
Linn DS models use the following Open Source software:<br />
<br />
== FreeRTOS ==<br />
Any FreeRTOS source code, whether modified or in it's original release form, or whether in whole or in part, can only be distributed by you under the terms of the GNU General Public License plus this exception. An independent module is a module which is not derived from or based on FreeRTOS.<br />
<br />
Clause 1:<br />
<br />
Linking FreeRTOS with other modules is making a combined work based on FreeRTOS. Thus, the terms and conditions of the GNU General Public License V2 cover the whole combination.<br />
<br />
As a special exception, the copyright holders of FreeRTOS give you permission to link FreeRTOS with independent modules to produce a statically linked executable, regardless of the license terms of these independent modules, and to copy and distribute the resulting executable under terms of your choice, provided that you also meet, for each linked independent module, the terms and conditions of the license of that module. An independent module is a module which is not derived from or based on FreeRTOS.<br />
<br />
Clause 2:<br />
<br />
FreeRTOS may not be used for any competitive or comparative purpose, including the publication of any form of run time or compile time metric, without the express permission of Real Time Engineers Ltd. (this is the norm within the industry and is intended to ensure information accuracy).<br />
<br />
The GPL v2 text is available [[FreeRTOS_GPLv2| here]] <br />
<br />
== tlsf ==<br />
The TLSF allocator has been released under a dual license scheme: [http://www.gnu.org/copyleft/gpl.html| GPL] and [http://www.gnu.org/copyleft/lgpl.html| LGPL].<br />
<br />
For the GPL licence, the following exception applies.<br />
<br />
TLSF is free software; you can redistribute it and/or modify it under terms of<br />
the GNU General Public License as published by the Free Software Foundation;<br />
either version 2, or (at your option) any later version. TLSF is distributed<br />
in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the<br />
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See<br />
the GNU General Public License for more details. You should have received a<br />
copy of the GNU General Public License along with TLSF; see file COPYING. If<br />
not, write to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,<br />
USA.<br />
<br />
As a special exception, including TLSF header files in a file, or linking with<br />
other files objects to produce an executable application, is merely considered<br />
normal use of the library, and does *not* fall under the heading of "derived<br />
work". Therfore does not by itself cause the resulting executable application<br />
to be covered by the GNU General Public License. This exception does not<br />
however invalidate any other reasons why the executable file might be covered<br />
by the GNU Public License.<br />
<br />
== lwIP ==<br />
lwIP is licenced under the BSD licence: <br />
<br />
Copyright (c) 2001-2004 Swedish Institute of Computer Science. <br />
All rights reserved. <br />
<br />
Redistribution and use in source and binary forms, with or without modification, <br />
are permitted provided that the following conditions are met: <br />
<br />
1. Redistributions of source code must retain the above copyright notice, <br />
this list of conditions and the following disclaimer. <br />
2. Redistributions in binary form must reproduce the above copyright notice, <br />
this list of conditions and the following disclaimer in the documentation <br />
and/or other materials provided with the distribution. <br />
3. The name of the author may not be used to endorse or promote products <br />
derived from this software without specific prior written permission. <br />
<br />
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS AND ANY EXPRESS OR IMPLIED <br />
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF <br />
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT <br />
SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, <br />
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT <br />
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS <br />
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN <br />
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING <br />
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY <br />
OF SUCH DAMAGE.<br />
<br />
== OpenSSL ==<br />
<br />
LICENSE ISSUES<br />
==============<br />
<br />
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of<br />
the OpenSSL License and the original SSLeay license apply to the toolkit.<br />
See below for the actual license texts. Actually both licenses are BSD-style<br />
Open Source licenses. In case of any license issues related to OpenSSL<br />
please contact openssl-core@openssl.org.<br />
<br />
OpenSSL License<br />
---------------<br />
<br />
/* ====================================================================<br />
* Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved.<br />
*<br />
* Redistribution and use in source and binary forms, with or without<br />
* modification, are permitted provided that the following conditions<br />
* are met:<br />
*<br />
* 1. Redistributions of source code must retain the above copyright<br />
* notice, this list of conditions and the following disclaimer. <br />
*<br />
* 2. Redistributions in binary form must reproduce the above copyright<br />
* notice, this list of conditions and the following disclaimer in<br />
* the documentation and/or other materials provided with the<br />
* distribution.<br />
*<br />
* 3. All advertising materials mentioning features or use of this<br />
* software must display the following acknowledgment:<br />
* "This product includes software developed by the OpenSSL Project<br />
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"<br />
*<br />
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to<br />
* endorse or promote products derived from this software without<br />
* prior written permission. For written permission, please contact<br />
* openssl-core@openssl.org.<br />
*<br />
* 5. Products derived from this software may not be called "OpenSSL"<br />
* nor may "OpenSSL" appear in their names without prior written<br />
* permission of the OpenSSL Project.<br />
*<br />
* 6. Redistributions of any form whatsoever must retain the following<br />
* acknowledgment:<br />
* "This product includes software developed by the OpenSSL Project<br />
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"<br />
*<br />
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY<br />
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE<br />
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR<br />
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR<br />
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,<br />
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT<br />
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;<br />
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)<br />
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,<br />
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)<br />
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED<br />
* OF THE POSSIBILITY OF SUCH DAMAGE.<br />
* ====================================================================<br />
*<br />
* This product includes cryptographic software written by Eric Young<br />
* (eay@cryptsoft.com). This product includes software written by Tim<br />
* Hudson (tjh@cryptsoft.com).<br />
*<br />
*/<br />
<br />
Original SSLeay License<br />
-----------------------<br />
<br />
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)<br />
* All rights reserved.<br />
*<br />
* This package is an SSL implementation written<br />
* by Eric Young (eay@cryptsoft.com).<br />
* The implementation was written so as to conform with Netscapes SSL.<br />
* <br />
* This library is free for commercial and non-commercial use as long as<br />
* the following conditions are aheared to. The following conditions<br />
* apply to all code found in this distribution, be it the RC4, RSA,<br />
* lhash, DES, etc., code; not just the SSL code. The SSL documentation<br />
* included with this distribution is covered by the same copyright terms<br />
* except that the holder is Tim Hudson (tjh@cryptsoft.com).<br />
* <br />
* Copyright remains Eric Young's, and as such any Copyright notices in<br />
* the code are not to be removed.<br />
* If this package is used in a product, Eric Young should be given attribution<br />
* as the author of the parts of the library used.<br />
* This can be in the form of a textual message at program startup or<br />
* in documentation (online or textual) provided with the package.<br />
* <br />
* Redistribution and use in source and binary forms, with or without<br />
* modification, are permitted provided that the following conditions<br />
* are met:<br />
* 1. Redistributions of source code must retain the copyright<br />
* notice, this list of conditions and the following disclaimer.<br />
* 2. Redistributions in binary form must reproduce the above copyright<br />
* notice, this list of conditions and the following disclaimer in the<br />
* documentation and/or other materials provided with the distribution.<br />
* 3. All advertising materials mentioning features or use of this software<br />
* must display the following acknowledgement:<br />
* "This product includes cryptographic software written by<br />
* Eric Young (eay@cryptsoft.com)"<br />
* The word 'cryptographic' can be left out if the rouines from the library<br />
* being used are not cryptographic related :-).<br />
* 4. If you include any Windows specific code (or a derivative thereof) from <br />
* the apps directory (application code) you must include an acknowledgement:<br />
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"<br />
* <br />
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND<br />
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE<br />
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE<br />
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE<br />
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL<br />
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS<br />
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)<br />
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT<br />
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY<br />
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF<br />
* SUCH DAMAGE.<br />
* <br />
* The licence and distribution terms for any publically available version or<br />
* derivative of this code cannot be changed. i.e. this code cannot simply be<br />
* copied and put under another distribution licence<br />
* [including the GNU Public Licence.]<br />
*/<br />
<br />
== FLAC ==<br />
Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2007 Josh Coalson<br />
<br />
Redistribution and use in source and binary forms, with or without<br />
modification, are permitted provided that the following conditions<br />
are met:<br />
<br />
- Redistributions of source code must retain the above copyright<br />
notice, this list of conditions and the following disclaimer.<br />
<br />
- Redistributions in binary form must reproduce the above copyright<br />
notice, this list of conditions and the following disclaimer in the<br />
documentation and/or other materials provided with the distribution.<br />
<br />
- Neither the name of the Xiph.org Foundation nor the names of its<br />
contributors may be used to endorse or promote products derived from<br />
this software without specific prior written permission.<br />
<br />
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS<br />
``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT<br />
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR<br />
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR<br />
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,<br />
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,<br />
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR<br />
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF<br />
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING<br />
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS<br />
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.<br />
<br />
== libogg ==<br />
Copyright (c) 2002, Xiph.org Foundation<br />
<br />
Redistribution and use in source and binary forms, with or without<br />
modification, are permitted provided that the following conditions<br />
are met:<br />
<br />
- Redistributions of source code must retain the above copyright<br />
notice, this list of conditions and the following disclaimer.<br />
<br />
- Redistributions in binary form must reproduce the above copyright<br />
notice, this list of conditions and the following disclaimer in the<br />
documentation and/or other materials provided with the distribution.<br />
<br />
- Neither the name of the Xiph.org Foundation nor the names of its<br />
contributors may be used to endorse or promote products derived from<br />
this software without specific prior written permission.<br />
<br />
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS<br />
``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT<br />
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR<br />
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION<br />
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,<br />
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT<br />
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,<br />
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY<br />
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT<br />
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE<br />
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.<br />
<br />
== Tremor ==<br />
Copyright (c) 2002, Xiph.org Foundation<br />
<br />
Redistribution and use in source and binary forms, with or without<br />
modification, are permitted provided that the following conditions<br />
are met:<br />
<br />
- Redistributions of source code must retain the above copyright<br />
notice, this list of conditions and the following disclaimer.<br />
<br />
- Redistributions in binary form must reproduce the above copyright<br />
notice, this list of conditions and the following disclaimer in the<br />
documentation and/or other materials provided with the distribution.<br />
<br />
- Neither the name of the Xiph.org Foundation nor the names of its<br />
contributors may be used to endorse or promote products derived from<br />
this software without specific prior written permission.<br />
<br />
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS<br />
``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT<br />
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR<br />
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION<br />
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,<br />
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT<br />
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,<br />
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY<br />
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT<br />
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE<br />
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.<br />
<br />
== ALAC ==<br />
Apache License<br />
<br />
Version 2.0, January 2004<br />
<br />
http://www.apache.org/licenses/<br />
<br />
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION<br />
<br />
1. Definitions.<br />
<br />
"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.<br />
<br />
"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.<br />
<br />
"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.<br />
<br />
"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.<br />
<br />
"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.<br />
<br />
"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.<br />
<br />
"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).<br />
<br />
"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.<br />
<br />
"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."<br />
<br />
"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.<br />
<br />
2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.<br />
<br />
3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.<br />
<br />
4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:<br />
<br />
You must give any other recipients of the Work or Derivative Works a copy of this License; and<br />
<br />
You must cause any modified files to carry prominent notices stating that You changed the files; and<br />
<br />
You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and<br />
<br />
If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License. You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.<br />
<br />
5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.<br />
<br />
6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.<br />
<br />
7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.<br />
<br />
8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.<br />
<br />
9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.<br />
<br />
== AAC ==<br />
Software License for The Fraunhofer FDK AAC Codec Library for Android<br />
<br />
© Copyright 1995 - 2012 Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V.<br />
All rights reserved.<br />
<br />
1. INTRODUCTION<br />
The Fraunhofer FDK AAC Codec Library for Android ("FDK AAC Codec") is software that implements<br />
the MPEG Advanced Audio Coding ("AAC") encoding and decoding scheme for digital audio.<br />
This FDK AAC Codec software is intended to be used on a wide variety of Android devices.<br />
<br />
AAC's HE-AAC and HE-AAC v2 versions are regarded as today's most efficient general perceptual<br />
audio codecs. AAC-ELD is considered the best-performing full-bandwidth communications codec by<br />
independent studies and is widely deployed. AAC has been standardized by ISO and IEC as part<br />
of the MPEG specifications.<br />
<br />
Patent licenses for necessary patent claims for the FDK AAC Codec (including those of Fraunhofer)<br />
may be obtained through Via Licensing (www.vialicensing.com) or through the respective patent owners<br />
individually for the purpose of encoding or decoding bit streams in products that are compliant with<br />
the ISO/IEC MPEG audio standards. Please note that most manufacturers of Android devices already license<br />
these patent claims through Via Licensing or directly from the patent owners, and therefore FDK AAC Codec<br />
software may already be covered under those patent licenses when it is used for those licensed purposes only.<br />
<br />
Commercially-licensed AAC software libraries, including floating-point versions with enhanced sound quality,<br />
are also available from Fraunhofer. Users are encouraged to check the Fraunhofer website for additional<br />
applications information and documentation.<br />
<br />
2. COPYRIGHT LICENSE<br />
<br />
Redistribution and use in source and binary forms, with or without modification, are permitted without<br />
payment of copyright license fees provided that you satisfy the following conditions:<br />
<br />
You must retain the complete text of this software license in redistributions of the FDK AAC Codec or<br />
your modifications thereto in source code form.<br />
<br />
You must retain the complete text of this software license in the documentation and/or other materials<br />
provided with redistributions of the FDK AAC Codec or your modifications thereto in binary form.<br />
You must make available free of charge copies of the complete source code of the FDK AAC Codec and your<br />
modifications thereto to recipients of copies in binary form.<br />
<br />
The name of Fraunhofer may not be used to endorse or promote products derived from this library without<br />
prior written permission.<br />
<br />
You may not charge copyright license fees for anyone to use, copy or distribute the FDK AAC Codec<br />
software or your modifications thereto.<br />
<br />
Your modified versions of the FDK AAC Codec must carry prominent notices stating that you changed the software<br />
and the date of any change. For modified versions of the FDK AAC Codec, the term<br />
"Fraunhofer FDK AAC Codec Library for Android" must be replaced by the term<br />
"Third-Party Modified Version of the Fraunhofer FDK AAC Codec Library for Android."<br />
<br />
3. NO PATENT LICENSE<br />
<br />
NO EXPRESS OR IMPLIED LICENSES TO ANY PATENT CLAIMS, including without limitation the patents of Fraunhofer,<br />
ARE GRANTED BY THIS SOFTWARE LICENSE. Fraunhofer provides no warranty of patent non-infringement with<br />
respect to this software.<br />
<br />
You may use this FDK AAC Codec software or modifications thereto only for purposes that are authorized<br />
by appropriate patent licenses.<br />
<br />
4. DISCLAIMER<br />
<br />
This FDK AAC Codec software is provided by Fraunhofer on behalf of the copyright holders and contributors<br />
"AS IS" and WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, including but not limited to the implied warranties<br />
of merchantability and fitness for a particular purpose. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR<br />
CONTRIBUTORS BE LIABLE for any direct, indirect, incidental, special, exemplary, or consequential damages,<br />
including but not limited to procurement of substitute goods or services; loss of use, data, or profits,<br />
or business interruption, however caused and on any theory of liability, whether in contract, strict<br />
liability, or tort (including negligence), arising in any way out of the use of this software, even if<br />
advised of the possibility of such damage.<br />
<br />
5. CONTACT INFORMATION<br />
<br />
Fraunhofer Institute for Integrated Circuits IIS<br />
Attention: Audio and Multimedia Departments - FDK AAC LL<br />
Am Wolfsmantel 33<br />
91058 Erlangen, Germany<br />
<br />
www.iis.fraunhofer.de/amm<br />
amm-info@iis.fraunhofer.de<br />
<br />
== Functor ==<br />
[[https://github.com/openhome/ohNet/blob/master/OpenHome/Functor.h| Code]] was heavily influenced by the article in http://www.tutok.sk/fastgl/callback.html<br />
The psuedo-code in this article was based on a header (no longer obviously available at tutok.sk) which included the following license:<br />
<br />
Permission to use, copy, modify, distribute and sell this software<br />
for any purpose is hereby granted without fee,<br />
provided that the above copyright notice appear in all copies and<br />
that both that copyright notice and this permission notice appear<br />
in supporting documentation. Rich Hickey makes no<br />
representations about the suitability of this software for any<br />
purpose. It is provided "as is" without express or implied warranty.<br />
<br />
== mDNS ==<br />
Copyright (c) 2002-2003 Apple Computer, Inc. All rights reserved.<br />
<br />
Licensed under the Apache License, Version 2.0 (the "License");<br />
you may not use this file except in compliance with the License.<br />
You may obtain a copy of the License at<br />
<br />
http://www.apache.org/licenses/LICENSE-2.0<br />
<br />
Unless required by applicable law or agreed to in writing, software<br />
distributed under the License is distributed on an "AS IS" BASIS,<br />
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.<br />
See the License for the specific language governing permissions and<br />
limitations under the License.<br />
<br />
== md5 ==<br />
Copyright (C) 1999, 2002 Aladdin Enterprises. All rights reserved.<br />
<br />
This software is provided 'as-is', without any express or implied<br />
warranty. In no event will the authors be held liable for any damages<br />
arising from the use of this software.<br />
<br />
Permission is granted to anyone to use this software for any purpose,<br />
including commercial applications, and to alter it and redistribute it<br />
freely, subject to the following restrictions:<br />
<br />
1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.<br />
<br>2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.<br />
<br>3. This notice may not be removed or altered from any source distribution.<br />
<br />
L. Peter Deutsch<br />
ghost@aladdin.com</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Surround_Sound&diff=14673
Surround Sound
2018-02-16T14:43:51Z
<p>Simonc: Important typo in rears / surrounds dependency</p>
<hr />
<div>[[Image:SurroundSound.jpg|right|300px]]<br />
<br />
=Introduction=<br />
<br />
The Davaar 55 software release introduces [https://en.wikipedia.org/wiki/Surround_sound Surround Sound] (multichannel) support to all existing DSM products that feature both HDMI and Exakt functionality. This document gives an overview of the surround feature and provides examples of the various configuration options available.<br><br><br />
'''If you are using Exaktboxes please be aware that these will ONLY support loudspeakers that are listed [https://www.linn.co.uk/technology/exakt#linn-speaker-upgrades ''HERE'']'''<br />
<br />
=Requirements=<br />
To support surround functionality, a DSM must have an Exakt interface to allow multiple speakers to be connected. The DSM must have an HDMI interface to enable delivery of surround audio content. A 3rd party source device (ex. Blu Ray player) must be used to deliver surround audio to the DSM via HDMI. The source device must be capable of delivering (non-encoded) PCM multichannel content.<br />
<br />
=Terminology=<br />
Surround speaker configurations are expressed using two numbers separated by a dot (example "7.1"). The first number indicates the quantity of full frequency range (FFR) speakers in the system and the second number indicates the quantity of low frequency (subwoofer) speakers. A 5.2 system would therefore contain 5 FFR speakers and 2 subwoofers. Linn surround systems support a maximum of 7 FFR speakers with no limit on the number of subwoofers. Each speaker in the system has a specific role (type) which dictates the audio content that it plays.<br />
<br />
The available FFR speaker types are: <br />
<br />
* '''Front Left''' (FL)<br />
* '''FrontRight''' (FR)<br />
* '''Surround Left''' (SL)<br />
* '''Surround Right''' (SR)<br />
* '''Rear Left''' (RL)<br />
* '''Rear Right''' (RR)<br />
* '''Centre''' (C)<br />
<br />
The available subwoofer (sub) speaker types are: <br />
<br />
* '''Sub Mono''' (LFM)<br />
* '''Sub Left''' (LFL)<br />
* '''Sub Right''' (LFR)<br />
* '''Sub LFE''' (LFE)<br />
<br />
=Rules=<br />
When configuring a surround system the following rules apply:<br />
<br />
* '''No FFR duplicates''': Only one of each FFR speaker type can be used.<br />
* '''No partial groups''': The speaker types FL/FR, SL/SR, RL/RR, LFL/LFR must always exist in pairs.<br />
* '''Fronts must be present''': FL and FR must always exist<br />
*''' No Rears without Surrounds''': The RL/RR pair cannot be present if SL/SR are not present<br />
<br />
If these rules are not adhered to, the surround speaker configuration will be invalid. The front panel will indicate this by displaying a "!" near the volume display. The audio may also be muted automatically.<br />
<br />
=Room Setup=<br />
The following diagrams show a range of typical valid surround room setups, indicating speaker types and positioning. Also shown are some invalid setups that break one or more of the rules outlined earlier. <br><br />
Channel assignment and speaker offsets are [[ExaktSurround | set up in Konfig]] <br />
<br />
==Symbol Key==<br />
<br />
[[Image:RoomSetupKey.jpg|center|550px|Key (Room Setup)]]<br />
==Stereo 2.0==<br />
[[Image:Room2-0.jpg|center|400px]]<br />
==Stereo 2.1==<br />
[[Image:Room2-1.jpg|center|400px]]<br />
==Surround 3.1==<br />
[[Image:Room3-1.jpg|center|400px]]<br />
==Surround 4.0==<br />
[[Image:Room4-0.jpg|center|400px]]<br />
==Surround 4.1==<br />
[[Image:Room4-1.jpg|center|400px]]<br />
==Surround 5.1==<br />
[[Image:Room5-1.jpg|center|400px]]<br />
==Surround 7.1==<br />
[[Image:Room7-1.jpg|center|400px]]<br />
==Surround 7.2==<br />
[[Image:Room7-2.jpg|center|400px]]<br />
<br />
<br />
==Invalid Surround Setup (No Fronts)==<br />
[[Image:RoomNoFronts.jpg|center|400px]]<br />
<br />
==Invalid Surround Setup (No Surrounds)==<br />
[[Image:RoomNoSurrounds.jpg|center|400px]]<br />
<br />
==Invalid Surround Setup (Partial Front Group)==<br />
[[Image:RoomPartialFronts.jpg|center|400px]]<br />
==Invalid Surround Setup (Partial Surround Group)==<br />
[[Image:RoomPartialSurrounds.jpg|center|400px]]<br />
==Invalid Surround Setup (Partial Rear Group)==<br />
[[Image:RoomPartialRears.jpg|center|400px]]<br />
<br />
=Speaker Setup=<br />
In a traditional hardware surround system, speakers are assigned their type implicitly by the physical output they are connected to. With Exakt, any type can be applied to any speaker, using [http://oss.linn.co.uk/trac#Konfig Konfig], regardless of how the speakers are physically connected. The following diagrams show various typical speaker connection examples for a range of surround configurations.<br />
<br />
<br />
==Symbol Key==<br />
[[Image:SpeakerSetupKey.jpg|center|500px]]<br />
<br />
<br />
==Stereo 2.0==<br />
[[Image:Speaker2-0.jpg|center|550px]]<br />
==Surround 3.1 With Non Exakt Centre and Sub==<br />
[[Image:Speaker3-1Mixed.jpg|center|450px]]<br />
<br />
==Surround 4.0 All Exakt==<br />
[[Image:Speaker4-0.jpg|center|450px]]<br />
<br />
==Surround 5.1 With Integrated Exakt Fronts==<br />
[[Image:Speaker5-1.jpg|center|450px]]<br />
<br />
==Surround 5.1 With Non Exakt Centre and Sub==<br />
[[Image:Speaker5-1Mixed1.jpg|center|450px]]<br />
<br />
==Surround 5.1 With Integrated Exakt Fronts & Surrounds, Non Exakt Centre & Sub==<br />
[[Image:Speaker5-1Mixed2.jpg|center|550px]]<br />
<br />
==Surround 7.1 With Integrated Exakt Centre And Sub==<br />
[[Image:Speaker7-1IntFronts.jpg|center|550px]]<br />
<br />
==Surround 7.1 With Integrated Exakt Fronts, Surrounds And Rears==<br />
[[Image:Speaker7-1IntGroups.jpg|center|650px]]<br />
<br />
==Surround 7.1 With Non Exakt Centre And Sub==<br />
[[Image:Speaker7-1Mixed.jpg|center|450px]]<br />
<br />
==Surround 7.1 All Exakt Box==<br />
[[Image:Speaker7-1NoInt.jpg|center|650px]]<br />
<br />
==Encoded Setups==<br />
<br />
Some HDMI source devices (e.g. Sky Q) only output encoded audio streams. To use these devices with a Linn DSM, a 3rd party AV processor or HDMI repeater must be used to decode the stream. The diagrams below indicate how these setups may be connected.<br />
<br />
=== Encoded 7.1 Without Exakt===<br />
[[Image:SpeakerEncodedNoExakt.jpg|center|500px]]<br />
<br />
=== Encoded 5.1 With Integrated Exakt Fronts===<br />
[[Image:Speaker5-1EncodedExakt.jpg|center|500px]]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=ReleaseNotes&diff=14518
ReleaseNotes
2018-01-25T10:36:12Z
<p>Simonc: /* Davaar 60 Build 193 (4.60.193) Released on 14 Dec 2017 */</p>
<hr />
<div>== Davaar Release Notes ==<br />
For help on how to upgrade your DS firmware, please see [[How_to_Upgrade_DS_Software|How to Upgrade DS Software]]<br />
<br />
=== Davaar 60 Build 193 (4.60.193) Released on 14 Dec 2017 ===<br />
'''Features'''<br />
* Added support for DSD playback on Klimax DS/3(Mk4) and Klimax DSM/2(Mk3)<br />
** Supports DSD64 and DSD128<br />
** Supports DSF (with metadata) and DFF (raw data) formats<br />
** Uses Katalyst DAC on DS/DSM analogue outputs (not available on Exakt outputs)<br />
** If using Kazoo server, please upgrade to 4.8.5 or higher for DSD file support<br />
'''Bug Fixes'''<br />
* Rework of BBC radio streaming code to better handle intermittent connection issues<br />
* Added support for HTTPS radio streams (re-enables support for ALR Jazz and Absolute Radio)<br />
* Faster eventing of updates after skipping tracks or seeking<br />
* Improved Exakt device discovery time<br />
* Fix for crash on Airplay<br />
* Fix for rare crash involving Exakt and toggling Standby<br />
* Fix for crash scrolling non-ascii metadata<br />
* Fixed space optimisation for certain devices <br />
* Fixed #4752: BBC streams don't resume when network cable disconnected and re-connected<br />
* Fixed #4631 and #5427: Occasional crashes while on BBC radio streams<br />
* Fixed #5594: Dropouts when playing from phono source<br />
* Fixed #5548: Enable Songcast synchronisation when on Spotify source, via Songcast delay option<br />
* Fixed #5549: Fix no audio/volume control on first selection of Spotify source in certain setups<br />
* Fixed #4431 and #4655: Errors in web UI help text.<br />
* Fixed #5558: Handset does not stop internet radio playback<br />
* Fixed #5525: Analogue Sources set to Delay Mode-"Video Sync" on Klimax Exakt DSM do not have the IR sync adjust option<br />
* Fixed #5520: Klimax products source select failure<br />
* Fixed #5471: IR: Seek doesn't work on Sneaky family products<br />
<br />
=== Davaar 59 Build 185 (4.59.185) Released on 30 Aug 2017 ===<br />
* Added Spotify Connect support (Spotify Premium account required). See http://docs.linn.co.uk/wiki/index.php/SpotifyConnect<br />
* Fixed Calm Radio login failures for username or password containing certain non-alphanumeric characters<br />
* Fixed #4784: Bug in Net Aux implementation which can result in device lock-up when network issues encountered.<br />
* Fixed #5228/#5465: Songcasting mono streams results in playback at half speed on receiver.<br />
* Fixed #5261: Seeking backwards in certain AAC tracks would result in playback resuming at half speed.<br />
<br />
=== Davaar 58 Build 182 (4.58.182) Released on 15 Aug 2017 ===<br />
* Added support for Calm Radio<br />
* Added Transport service. Developers see [http://wiki.openhome.org/wiki/Av:Developer:TransportService Transport Service Documentation] for details.<br />
* Front panel now displays transport state on NetAux<br />
* Fix one possible cause of errors reading network time (which causes failures to play Qobuz tracks)<br />
* Fixed crash reading network time (during startup of Qobuz tracks)<br />
* Handle HTTP redirects for Calm Radio streams (used by some free streams).<br />
* Don’t display skip next/previous buttons for Calm Radio stations.<br />
* Fix #5449 – crash processing WAV files that report their length as zero.<br />
* Relax tests for validity of WAV files (MinimStreamer sometimes outputs a slightly corrupt header on WAV streams).<br />
<br />
=== Davaar 57 Build 178 (4.57.178) Released on 29 Jun 2017 ===<br />
* Initial release for Sekrit DS<br />
<br />
=== Davaar 56 Build 177 (4.56.177) Released on 06 Jun 2017 ===<br />
* Fixed defect #5361: Proxy preamp connection causes DS to lockup on boot.<br />
* Improved handling of errors reading network time (may reduce problems with skipped or slow to start tracks from Qobuz)<br />
* Enable SDDP discovery for Control 4 integration to simplify developer tooling<br />
* Fixed defect #5300: KDSM (all variants) crash on spdif/tos selection when HDMI board disconnected<br />
* Fix for slow eventing from a DS (this may manifest as discovery problems)<br />
* Fix for crash processing a malformed search request (from an unknown third party control point)<br />
* Fixed defect #5295: HDMI2: Fix potential deadlock when switching between HDMI sources<br />
* Fixed defect #5287: Exakt: Front panel exclamation shows on valid stereo-only setup<br />
* Fixed defect #5281: Mute failing to fully mute (KDSM, Kiko)<br />
* Fixed defect #5265: Volume commands shouldn't affect Standby state if volume control is disabled<br />
* Fixed defect #5263: Sekrit DSM: No FP AMP or IR led operation<br />
* Fixed defect #5258: KDSM/2 front panel LED does not come on after power cycle<br />
* Fixed defect #5241: UI: Small volume value has right most pixels missing (when volume =100)<br />
* Fixed defect #5255: '&' character not shown on display (artist and composer fields)<br />
<br />
=== Davaar 55 Build 172 (4.55.172) Released on 30 Mar 2017 ===<br />
'''Features'''<br />
* Added support for Surround Sound<br />
** See http://docs.linn.co.uk/wiki/index.php/Surround_Sound for details and setup instructions.<br />
** Added trim control for Centre/LFE channels. This is available using the IR handset and can be used to fine-tune the relative volume of these channels compared to other inputs channels. Trim is available regardless of whether Centre/LFE are output to dedicated speakers or down-mixed into the rest of a surround system.<br />
** Volume is automatically adjusted to account for any attenuation caused by down-mixing multi-channel (surround) inputs<br />
** Songcast sending of surround content is not supported<br />
** NOTE: this also requires a new version of Konfig (4.33 or higher)<br />
* Classic and Classic Movie Preamp proxies reinstated (no disc functionality)<br />
* Improved front panel preset navigation<br />
* Improved general layout on front panel<br />
'''Bug Fixes'''<br />
* Fixed #5245: HDMI output shows wrong HDMI source at startup<br />
* Fixed drop in volume on HDMI when device or source has volume control disabled<br />
* Fixed crash playing 192/24 with Space+ enabled, surround setup and a large difference in positions of Exakt and analog speakers <br />
* Fixed #5602: analogue channels not always immediately in sync for surround content after applying Space Optimisation+<br />
* Fixed crash playing digital inputs<br />
* Fixed #5202: Fix digital outs carrying audio when in surround mode.<br />
* Fixed #5211: Fix crash caused by radio metadata.<br />
* Fixed #5228: Fix potential hang when switching between surround/stereo input material.<br />
* Fixed audio output silence on Exakt only Klimax and Akurate DSM devices<br />
* New Exakt filters for surround mode subwoofers<br />
* Adjust volume to account for any attenuation caused by down-mixing multi-channel content<br />
* Fixed #5165: Fix bug resulting in some AIFF files failing to play<br />
* Fixed #5108: Add "Dual Analogue/Exakt" output option to DS products with Exakt<br />
* Fixed #5166: Remove "Dual Analogue/Exakt" output option from Exakt-only DSMs<br />
* Fixed #5102: Fix digital outs not working on DSMs with Exakt speakers connected<br />
* Fixed #5138:'Lipsync option missing on Analog in on KDSM with Exakt'<br />
* Fixed #5170:'Marantz handset commands are adjusting balance on DS/DSM'<br />
* Fixed #5150: Fix potential DS deadlock when setting up Exakt devices.<br />
* Fixed #5151: Fix setting of analogue delay.<br />
* Fixed #5121: Improve handling of mismatched speaker configurations.<br />
* Fixes downgrade issue when space optimisation is set. Devices with this issue will need to be updated to this beta release (4.55.166) before they can be downgraded.<br />
* Fixed #5114: Reselecting the same playlist track via handset doesn't restart track<br />
* Fixed #5135: Front panel source button does not work on some Akurate DS variants<br />
* Fixed #5124: Kiko fails to disable power amps in standby<br />
* Fixed #4703: Line-out muted on Majik DSi & DSM<br />
* Fixed #4744: Display "pulses"<br />
* Fixed #5106: Rem19 Amp->Left/Right key functionality clash with Klimax Kontrol<br />
* Fixed #5043: Kiko - headphones not fully muting speaker output<br />
* Fixed #5100: Crash caused by Exakt debugging which was affecting some users' DSs<br />
* Work towards #4686: Muting may now give a more gradual fade of audio<br />
* Fixed rare crash sending UPnP announcements<br />
* Work towards a rare crash dealing with drop-outs on digital inputs<br />
* Fixed #4836: Handset navigation of playlist by artist or album not implemented<br />
* Fixed #4855: tone issue on Kiko family (whistling)<br />
* Fixed #4098: incorrect display of lip sync range when Exakt devices are connected.<br />
* Fixed #5069: HDMI disable pass-through issue on HDMI1 products<br />
* Fixed #5070: Kiko help text timeout using wrong start point / too early<br />
* Reduced scroll rate on Kiko<br />
* Removed transport state display glitch on Kiko<br />
* Fixed #4990: handle 16KHz sample rate in products with surround support<br />
* Fixed #5045: HDMI disable not working<br />
* Fixed #5046: digital output mode selector missing on DS products<br />
* Fixed #5049: crash attempting to play 6 channel WAV file<br />
* Fixed #5050: crash on HDMI source<br />
* Fixed #5051: front panel scrolling interrupted by sleep<br />
* Fixed #5052, #5056, #5059: loss of audio when switching away from any SPDIF or TOSLINK input<br />
* Press and hold of Standby for 10 seconds on Ir remote will force a crash then reboot. This can be used to send information on DS state to Linn (in lockup cases).<br />
* Additional logging to help diagnose DS discovery issues<br />
* Fixed front panel glitches when skipping track etc<br />
* Fixed occasional crash going into standby from an active digital input<br />
* Fixed crash playing very long tracks on UPnP AV source<br />
* Fixed #4903: assertion in Exakt speaker delay handling<br />
* Fixed #4399: slow updating of Exakt speaker mappings. Symptom showed as audio playing from both speakers for ~5s when switching between speakers under test using Konfig.<br />
* Fixed #4927: crash coming out of standby, caused by Exakt.<br />
* Fixed #4929: assertion in ChannelMapManager.<br />
* Fixed #4938: crash in Exakt message regulator.<br />
* Fixed #4847: excessive memory usage by Exakt subsystem.<br />
* Fixed #4532: intermittent missed audio at start of playback when using Exakt.<br />
* Fixed #4532: Fixed issue where start of audio was intermittently missed when Exakt speakers used <br />
* Fixed #4292: LED display flickers on IR when IR disabled<br />
* Fixed #4495: VFD displaying exakt logo at all times<br />
* Fixed #4565: Front panel "no network" X indicator is in wrong position<br />
* Fixed #4579: VFD - not scrolling track info on standby exit<br />
* Fixed #4636: Left/Right nav keys on Rem19 do not auto repeat (lipsync control)<br />
* Fixed #4642: Restarting a track or playing the same track again doesn't scroll track data<br />
* Fixed #4707: Source +/- from handset should not change source on a DS<br />
* Fixed #4800: First playlist track not shown on display when playlist restarted<br />
* Fixed #4812: KDSM VFD Help menu scroll is tempramental<br />
* Fixed #4856: UI retains metadata after playlist is deleted.<br />
* Fixed #4876: Press and hold '*' key on handset does not toggle shuffle state<br />
* Fixed #4884: FP display being refreshed every 2-3 seconds on source information make product info requests from IR handset difficult<br />
* Fixed #4891: Skip on radio presets doesn't wrap<br />
* Fixed #4898: Display comes out of sleep when volume is changed by network control point<br />
* Fixed #4907: Press and hold of the remote "i" button should scroll the current track info on the display<br />
* Fixed #4913: UI: Standby logo not being cleared properly on standby exit<br />
* Fixed #4926: Radio station name not being scrolled unless display mode set to "Channel"<br />
<br />
=== Davaar 54 Build 135 (4.54.135) Released on 29 Nov 2016 ===<br />
* Added support for Sekrit DSM, Sneaky DSM and Kiko DSM<br />
* Added support for Roomamp 2 using RS232 control<br />
* Added support for updated privacy statement<br />
* Added separate Konfig options for crash and activity reporting<br />
* Fix selection of radio preset using handset numeric keys<br />
* Digital Output Mode set to 'Fixed Sample Rate 176/192' now always uses 192k<br />
* Reduced display sleep time to match Web Konfig help text<br />
* Fix rare hang when room name is changed<br />
* Fix Klimax DSM/2 updater<br />
* Re-instate crash reporting (fix regression)<br />
* Removed fix for defect #4851: Sleep mode still activates in Standby. The fix caused a hang in some cases.<br />
* Fixed defect #4843: LED products don't respond to standby enter commands from network<br />
* Fixed defect #4851: Sleep mode still activates in Standby<br />
* Fixed defect #4852: Kiko doesn't have option to disable front LED<br />
* Fixed defect #4742: WAV transcoded radio streams not playing<br />
* Fixed defect #4725: Occasionally AkurateDsMk2 variant without Spdif output starts up in fallback<br />
* Fixed defect #4437: Scroll stutter when using Play Now from Kazoo<br />
* Fixed defect #4638: Network source change causes very brief source pop up on UI<br />
* Fixed defect #4654: Front panel volume popup times out too quickly when volume changed via network<br />
* Fixed defect #4677: VFD displays wrong track title after scrolling<br />
* Fixed defect #4727: Front panel - no artist info when on Playlist source<br />
* Fixed defect #4751: Front panel displays artist of first track in playlist as current artist<br />
* Fixed defect #4760: Front panel shows some metadata fields as empty, and can't select static info type<br />
* Fixed defect #4791: If startup in sleep mode is disabled, on KDSM the volume isn't displayed.<br />
* Fixed defect #4797: Front panel gives no indication that the DS is performing post-standby work<br />
* Fixed defect #4799: Direct source selection from Standby takes approx 10secs to action.<br />
* Fixed defect #4822: Pressing balance on handset locks up Sneaky MDS with volume control disabled<br />
* Fixed defect #4823: Starting playlist in Kazoo with DSM in standby does not always bring the VFD out of standby<br />
<br />
=== Davaar 53 Build 128 (4.53.128) Released on 03 Nov 2016 ===<br />
* Fixed problem with optical input not consistently locking on<br />
* Fixed problems with Exakt reprogramming<br />
* Reverted source index numbers to match Davaar37 for universal remotes and custom installations<br />
* Added opt-out for crash and user data collection<br />
* Fixed various Mpeg4 related crashes<br />
* Exakt link LEDs are now disabled when DS in sleep mode to match Davaar37<br />
* DS now reports correct software update version<br />
* Fixed hang using airplay to DS when DS in sleep mode<br />
* Fixed occasional problem with no audio on TOSLINK inputs<br />
* Fixed problem with HDMI 1.0 pass-thru not operating on power-up<br />
* Fixed lockup on Airplay reconnect<br />
* Volume/Mute icons are no longer displayed when volume control is disabled<br />
* Direct source buttons from all handsets now working<br />
<br />
=== Davaar 52 Build 119 (4.52.119) Released on 11 October 2016 ===<br />
* Relevant changes from Davaar 51 now applied to all other supported products<br />
* Worked around bug in Control4 driver. Control4 systems using the ExtraVegetables driver will work again.<br />
* Fixed most common device crashes based on user reports<br />
* Fixed selection of radio station/playlist track by number on handset<br />
* HDMI maintenance and improvements<br />
* Front panel maintenance and improvements<br />
<br />
=== Davaar 51 Build 115 (4.50.115) Released on 30 September 2016 ===<br />
''Only available for Klimax DSM/1 devices''<br />
* Added support for Klimax DSM/1 Renew device<br />
* Fixes for some unplayable WAV and AIFF files.<br />
* Fix incorrect bitrate reported for some MP3 files.<br />
* Changed type reported by UPnP device. This fixes older builds of SkweezyDs but breaks the recent 4.1.3 build<br />
* Re-instated icon in UPnP device XML (Bubble DS should display a device icon again)<br />
* Fixes for new HDMI hardware<br />
* Fixes LED problem on Klimax Renew DSM<br />
<br />
=== Davaar 50 Build 110 (4.50.110) Released on 19 September 2016 ===<br />
* Substantial internal changes, both to fix bugs and to enable future development<br />
* Improved clock recovery for DSM external digital inputs<br />
* Fixed crash on DHCP renewal<br />
* Simplified lip sync setup<br />
* Improved support for various codecs<br />
* Improved support for radio stations using HLS<br />
* Web Konfig page updated<br />
* ‘Report to Linn’ from Kazoo now includes logs from your DS<br />
<br />
A small number of features have been removed. If any of the following are very important to you, please stay on Davaar 37 for now.<br />
* Jukebox. (A replacement, with simplified setup, is planned.)<br />
* Third party AV receiver surround mode. (An improved replacement using Exakt is under development and coming soon.)<br />
* Control of CD player via a DS.<br />
<br />
This release is available for the following DS products:<br />
* Klimax – DS, DSM, Renew<br />
* Akurate – DS, DSM, Renew<br />
* Majik – DS, DS-I, DSM<br />
* Sneaky Music DS<br />
* Sekrit DS-I<br />
The following products will be added in a future release (hopefully very soon):<br />
* Sneaky DSM<br />
* Sekrit DSM<br />
* Kiko DSM<br />
<br />
Note that some third party control points do not fully support this release:<br />
* Lumin can report but not control the DS volume. This has been diagnosed and reported as a bug in the Lumin app so will be fixed by a later Lumin update.<br />
* Chorus DS cannot discover a DS running Davaar 50. This was diagnosed as a bug in Chorus. Sadly, its developer has passed away so a fix is unlikely.<br />
<br />
Several other control points, including [https://www.linn.co.uk/software#kazoo Kazoo], BubbleDS Next and Kinsky work as before so could be used to supplement or replace any control point that no longer functions.<br />
<br />
<br />
=== Davaar 37 Build 1671 (4.37.1671) Released on 09 May 2016 ===<br />
* Fixed Swiss Radio (SRF 1/2/3) playback problem.<br />
<br />
=== Davaar 36 Build 1598 (4.36.1598) Released on 07 March 2016 ===<br />
* Improvements made to start-up sequence of connected Exakt products.<br />
* Removed strict mime-type checking.<br />
* Attempted fix for lockup during HLS playback.<br />
<br />
=== Davaar 35 Build 1521 (4.35.1521) Released on 17 December 2015 ===<br />
* Fixed problem where certain DS devices with Exakt outputs would not boot with Davaar 34.<br />
<br />
=== REMOVED Davaar 34 Build 1484 (4.34.1484) Released on 26 November 2015 ===<br />
* Fixed occasional glitch during playback on certain products.<br />
* Allow MIME type application/ogg as a speical case. This caters for synlogy media server which reports this for ogg files, as well as certain FLAC based internet radio stations.<br />
<br />
=== Davaar 33 Build 1430 (4.33.1430) Released on 06 October 2015 ===<br />
* TuneIn changes to support new TuneIn tile in Kazoo<br />
* Fixed defect #3697: Akurate DS/0 plays silence after sample-rate change <br />
* Fixed defect #3696: Hissing sound from analogue outputs while product is booting up <br />
* Fixed defect #3695: Loud crack from analogue outputs when enabling/disabling Space (while music is playing) <br />
* Fix for Exakt reprogramming problems with certain DS/DSM devices <br />
* Fix for source change clicks with certain Exakt DS/DSM devices <br />
* Fix for playback issues with tracks from Kazoo Server <br />
* Fix for occasional HLS playback problems <br />
* Force DAC to mute in Exakt devices while programming<br />
* Exakt outputs are now muted prior to Exakt reprogramming<br />
* Added a workaround for the problem of DS's becoming undiscoverable<br />
<br><br />
<br />
=== Davaar 32 Build 1283 (4.32.1283) Released on 06 July 2015 ===<br />
* Fixed a problem with Qobuz getting into a state where nothing can be streamed. <br />
* Added support for BBC on demand content using HLS (for future streams). <br />
* Fixed audio mute issue on HDMI pass-through with Majik DSM. <br />
* Added support for Qobuz hi-res streams (192k/24bit and 96kHz/24bit). Currently these are only available on purchased content. <br />
<br><br />
<br />
=== Davaar 31 Build 1267 (4.31.1267) Released on 16 June 2015 ===<br />
* Fixes to support device production: new fallback firmware required.<br />
* Davaar 29 and 30 will no longer be available.<br />
<br><br />
<br />
=== Davaar 30 Build 1248 (4.30.1248) Released on 04 June 2015 ===<br />
* Fixes to support device production. <br />
* Fixed defect #3690: HDMI pass through not working consistently.<br />
* Fixed defect #3645: Analogue Input levels for balanced inputs now default to 4V-RMS.<br />
* Fixed BBC world service radio failure using new HLS stream.<br />
* Fixed customer reported Qobuz crash on attempt to retrieve time from the NTP server.<br />
<br><br />
<br />
== Davaar 29 ==<br />
=== Davaar 29 Build 1216 (4.29.1216) Released on 18 May 2015 ===<br />
* Initial release to support Qobuz streaming functionality on all DS and DSM devices.<br />
* Added HLS support for higher resolution BBC radio content (where available).<br />
* Exakt discovery enhancements.<br />
* Maintenance and bug fixes.<br />
<br><br />
<br />
== Davaar 28 ==<br />
=== Davaar 28 Build 1162 (4.28.1162) Released on 08 April 2015 ===<br />
* Fixed defect where Exakt outputs are not being muted when headphones are connected.<br />
<br />
== Davaar 27 ==<br />
=== Davaar 27 Build (4.27.1153) Released on 19 March 2015 ===<br />
* Fixed defect: Majik DS-I and Majik DSM/0 do not work with volume control disabled.<br />
<br />
== Davaar 26 ==<br />
=== Davaar 26 Build (4.25.1148) Released on 17 March 2015 ===<br />
* Added Space Optimisation for Akurate DSM.<br />
<br />
== Davaar 25 ==<br />
=== Davaar 25 Build (4.25.1134) Released on 16 March 2015 ===<br />
* Added Space Optimisation for all DS products (minus Akurate DSM).<br />
* Initial release for Klimax DS/2, Akurate DS/2, Majik DS/1 and Majik DSM/2.<br />
* No longer use the '0' handset key to change delay modes at an attempt to lip sync normalise (use Konfig instead).<br />
* Fixed Tidal login bug<br />
<br />
== Davaar 24 ==<br />
=== Davaar 24 Build (4.24.1066) Released on 14 January 2014 ===<br />
* Fixed various long-term Tidal playback issues related to handling of bad tracks.<br />
<br />
== Davaar 23 ==<br />
=== Davaar 23 Build (4.23.1042) Released on 18 December 2014 ===<br />
* Initial release to support [http://www.tidalhifi.com Tidal] streaming functionality on all DS and DSM devices.<br />
* Fixed the device discovery issue related to Bonjour where devices were becoming undiscoverable after around 3 weeks of on time.<br />
<br />
== Davaar 22 ==<br />
=== Davaar 22 Build (4.22.1006) Released on 26 November 2014 ===<br />
* Intial release for Akurate Renew DSM, Klimax Renew DSM, and Akurate Renew DS/1.<br />
* Fixed defect #3600: Exakt outs not muted with headphones on - Akurate DSM/1.<br />
* Exakt back panel LEDs on DS are now turned off in Standby.<br />
* Fixed defect #3640: Exakt: DSM crashes when Konfig is closed while DSM is in speaker discovery phase.<br />
* Fixed #3642: UI: buffering spinner visible during exakt reprog.<br />
<br />
== Davaar 21 ==<br />
=== Davaar 21 Build (4.21.936) Released on 10 November 2014 ===<br />
* Fixed defect #3637: Toslink sample rate family changes not working over ExaktLink.<br />
* Fixed defect #3630: Exakt: Channel map on speakers and crossovers should default to 'OFF'.<br />
* Fixed defect #3632: On standby exit, Exakt should ramp audio once.<br />
* Fixed defect #3638: UI corruption whilst reprogramming Exakts.<br />
* Exakt back panel LEDs now behave consistently accross the product range.<br />
<br />
== Davaar 20 ==<br />
=== Davaar 20 Build (4.20.916) Released on 23 September 2014 ===<br />
* REQUIRED for compatability with latest Exakt firmware releases.<br />
* Klimax DSM/1: Exakt LED's now go On or Off according to the configuration setting.<br />
* Fixed defect #3635: Exakt: Klimax DSM/1 continually reboots at startup when connected to Klimax 350 speakers.<br />
* Fixed defect #3603: Internal volume control 'Off' not working on Akurate Exakt DSM.<br />
* Fixed defect #3609: No HDMI audio output when DSM devices are configured with 'Startup Mode' as 'Active'.<br />
* Fixed #3621: DS crashes trying to play tracks created by StationRipper.<br />
* TuneIn fix: certain stations that present unplayable url's followed by playable url's (in the original list returned from TuneIn) will now work.<br />
* Exakt devices can now be interrogated and programmed while DSM is in standby.<br />
* Fixed defect #3612: HDMI: changing source DelayMode causes loss of audio.<br />
* TuneIn fix: preset xml was occasionally being corrupted (causing preset navigation to behave unpredictably).<br />
* Fixed problem with non-raw SPDIF and <44.1k Exakt outputs being 6dB too low.<br />
* Fixed #3618: (UpnpAv) DS reboots when seeking in non-seekable stream.<br />
* Fixed #3611: Multichannel DVD audio with Davaar 19 has no surround channels.<br />
<br />
== Davaar 19 ==<br />
=== Davaar 19 Build 799 (4.19.799) Released on 08 July 2014 ===<br />
* Initial release for the Klimax Renew DS (with support for Klimax DS/1).<br />
* Fixed defect #3533: DSM products will not boot if HDMI is disabled.<br />
* Fixed defect #3607: Variable delay not set correctly on initialisation.<br />
* Fixed defect #3600: Exakt outs not muted with headphones (Akurate DSM/1).<br />
* Fixed defect #3603: Internal volume control on Akurate Exakt, Akurate DSM/1 and Klimax DSM/1 now boot properly after disabling internal volume control.<br />
* Fixed problem with SPDIF (100ms latency in applying status change mute).<br />
* Fix to ensure the DSM does not respond to source change requests for invisible sources when in standby (when using the direct source codes).<br />
* Fixed responsiveness problem when browsing TuneIn folders using the handset.<br />
* Added Assert if spartan 6 programming fails on bootup.<br />
* Fixed crash on DSM devices when HDMI "Disabled In Sleep" is enabled.<br />
* PLEASE NOTE: Renew DS has been renamed Klimax Renew DS. Renew DS owners wanting to roll back to older versions of firmware will need to manually rename the variant folder in the older firmware to match the new model name (i.e. rename 'RenewDs' folder to 'KlimaxRenewDs'). Klimax DS Mk2 devices that have been renewed should not be rolled back as they will not boot.<br />
* PLEASE NOTE: Most products have not been updated since Davaar 14. For these products, all relevant changes described in Davaar 15-18 are included in the Davaar 19 release.<br />
<br />
== Davaar 18 ==<br />
=== Davaar 18 Build 754 (4.18.754) Released on 04 June 2014 ===<br />
* Initial release of the Klimax DSM with Exakt Link.<br />
* Initial release of the Akurate DSM with Exakt Link.<br />
* Fixed defect #3566: HDMI: Audio cracks/pops when changing sample rate.<br />
* Fixed defect #3569: Certain MP3 files report incorrect duration.<br />
* Fixed defect #3589: Exakt Connection Status change events are sent out repeatedly.<br />
* Fixed defect #3597: Analog path gain correction is being applied to Exakt outputs. <br />
* Fixed defect #3568: Out-of-sync audio with Exakt to NonExakt songcast after clock multiplier change.<br />
* Fixed error in time of flight optimisation in Exakt systems.<br />
* Variable delay mode: Songcast sync will now occur at 160ms and higher rather than 250ms and higher.<br />
* Provide feedback on VFD when Exakt programming is in progress.<br />
* Radio playback: made pls file check slightly less strict to cope with a user reported station that didn't work.<br />
<br />
== Davaar 17 ==<br />
=== Davaar 17 Build 715 (4.17.715) Released on 29 April 2014 ===<br />
* Updates to support Akubarik Exakt speaker upgrades.<br />
* Fixed defect #3565: HDMI: No audio on reselecting HDMI source with 32k stream present.<br />
* Improved super-tweeter drive unit model for all Exakt crossovers.<br />
<br />
== Davaar 16 ==<br />
=== Davaar 16 Build 694 (4.16.694) Released on 22 April 2014 ===<br />
* Initial release for the Akurate Exakt DSM and the Exakt Akubarik speakers.<br />
<br />
== Davaar 15 ==<br />
=== Davaar 15 Build 647 (4.15.647) Released on 06 March 2014 ===<br />
* Includes crossovers for Akurate 242 and Akubarik with Klimax Exakt Tunebox.<br />
* Added Single Ended crossover design files for Akurate 242, Akubarik, and Komri for use with the Klimax Exakt Tunebox.<br />
* Fixed defect #3558: Exakt Device List shows wrong version number after updating Tunebox.<br />
* Added fast flashing dim indicator on front of Klimax Exakt 350E and Tunebox for hardware fault conditions, eg overtemp.<br />
* Implemented 6db difference in the Klimax 350 single ended crossover compared to the balanced version.<br />
* Fixes for songcast receiver stability and synchronisation with Exakt systems. Fixed Songacst delay is now 150ms. Variable delay can now be set to lower than 100ms (Songcast sync if variable delay is >=250ms).<br />
* Added input signal detection and optional keep-awake tone generation for all Exakt crossovers, fixing amplifier power off problems.<br />
* Improved bass handling in the crossover domain.<br />
* Improvement to empirical drive unit inductance model (with regards to compenstation for drive unit variations).<br />
* Fixed problem with Exakt discovery eventing when disconnecting/connecting link cable.<br />
* Fixed audio thump on second crossover/speaker in Exakt link daisychain.<br />
<br />
== Davaar 14 ==<br />
=== Davaar 14 Build 549 (4.14.549) Released on 28 November 2013 ===<br />
* Initial release for the Klimax Exakt Tunebox (with support for Klimax 350 and Komri speakers)<br />
* Fixed Airplay connection issue for Mac users on iTunes 11.1<br />
* Fixed problem that was causing high jitter on all sources for Kiko DSM, Sneaky DSM, and Sekrit DSM. This fix will provide an improvement in audio quality (for these products only)<br />
* Fixed room correction issues for Exakt<br />
* Fixed issue with an Exakt device being used as a Songcast receiver going out of sync with the Songcast sender<br />
* Fixed issue with an Exakt device crashing if more than 20 unique crossovers have been discovered since factory reset<br />
* Added support for right to left text on the front panel display<br />
* Fixed defect #3535: Line-out channels reversed on Sekrit/Sneaky DSM<br />
* Klimax DSM and Klimax Exakt DSM: front panel display will now dim in standby<br />
* PLEASE NOTE: Klimax DSM now requires Konfig 4.11.8 or higher for firmware updates<br />
<br />
== Davaar 13 ==<br />
=== Davaar 13 Build 469 (4.13.469) Released on 26 September 2013 ===<br />
* Initial release for the Klimax Exakt DSM and the Klimax Exakt 350 speakers<br />
<br />
== Davaar 12 ==<br />
=== Davaar 12 Build 357 (4.12.357) Released on 1 July 2013 ===<br />
* Fixed defect #3449: Songcast causes Akurate DS to lock up<br />
* Fixed defect #3448: DSM - No Audio with Hdmi Sleep mode set to yes.<br />
* Fixed defect #3453: Songcast causes DS (with proxy) to become undiscoverable<br />
* Fixed defect #3293: Input level is adjustable on phono type sources <br />
* Fixed defect #3388: Digital output is not muted in standby <br />
* Fixed defect #3392: Startup source ignored after power cycle if Front Aux connected / Active startup mode <br />
* Fixed defect #3393: HDMI "Turn off in sleep mode" not working on Sneaky, Sekrit and Kiko <br />
* Fixed defect #3395: HDMI bypass issue on Majik DSM :Front Aux <br />
* Fixed defect #3422: Variable delay is incorrect when switching from Radio/Playlist to Analog input <br />
* Fixed defect #3423: Thai characters displayed incorrectly on front panel display <br />
* Fixed defect #3424: Jukebox: If you add a Presets Folder URL with the NAS username:password the DS reports an error <br />
* Fixed defect #3430: Songcast app causes DS to be undiscoverable <br />
* Fixed defect #3432: DelayManager reporting DelayEnabled as true in Fixed mode <br />
* Fixed defect #3433: Lip sync cannot be controlled from REM020 handset<br />
<br />
== Davaar 11 ==<br />
=== Davaar 11 Build 5 (4.11.5) Released on 21 February 2013 ===<br />
* Initial release for Sneaky DSM<br />
* Fixed defect: HDMI lockup issues<br />
* Fixed defect: Akurate DSM/Klimax DSM: balance on analog inputs is reversed<br />
* Fixed defect: Majik DSM: loss of HDMI audio after changing HDMI "Audio Mode" while in Standby<br />
* Fixed defect: Pop on analog out on Sekrit DSM<br />
* Added parameter to enable/disable from panel buttons<br />
* Added display sleep mode parameter to remaining models (single led devices: Renew DS, Akuarte Renew DS, Sneaky Music DS)<br />
* Device xml serial number field now contains the product ID, the product ID is then reflected in the device UDN as well. This will impact any contol point that caches device UDN numbers: you will be forced to re-discover your device.<br />
* Reduced brightness of Sekrit DSM LED's<br />
* Device will now send crash data automatically on power on (if avaialble). This functionality is on by default, but can be turned off using the corresponding config parameter<br />
<br />
== Davaar 10 ==<br />
=== Davaar 10 Build 2 (4.10.2) Released on 11 December 2012 ===<br />
* Initial release for Sekrit DSM<br />
<br />
== Davaar 9 ==<br />
=== Davaar 9 Build 7 (4.9.7) Released on 22 October 2012 ===<br />
<br />
* Fixed occasional thud coming out of standby on Majik DSM<br />
* Fixed bug in web config where apostrophe character could not be used in room name<br />
* Fixed defect: Songcast fails to play on sender switch<br />
* Fixed defect: DS to DS Songcast, receiver has silent gap at track boundary (during gapless playback)<br />
* Added configuration option to disable ethernet leds<br />
* Added configuration option for Kiko led visibility in sleep mode<br />
* Added on device check for matching firmware and hardware variants. If mistmatched firmware is loaded onto a device, it will no longer boot.<br />
* Fixed defect: Digital inputs intermittently staying muted<br />
* Fixed defect: Noise when playing studio master files on Kiko DSM<br />
* Fixed defect: First stage of up-sampling was being bypassed at certain sample rates in some products.<br />
* Fixed defect: Device crash on attempting to play BBC Listen Again content<br />
* Fixed lip sync anomaly when AV latency equaled lip sync<br />
<br />
== Davaar 8 ==<br />
=== Davaar 8 Build 5 (4.8.2) Released on 26 July 2012 ===<br />
* Initial release for Akurate Renew DS<br />
* Includes support for Akurate DS/0 upgrades<br />
<br />
== Davaar 7 ==<br />
=== Davaar 7 Build 5 (4.7.5) Released on 05 July 2012 ===<br />
<br />
* Songcast resend functionality: reduced occurrence of audio dropouts when running over some wireless networks<br />
* Net Aux disconnect/reconnect robustness improvements, including timeout if sender disconnects from network<br />
* Add retry fix to solve dropout problems when using Net Aux<br />
* Increased maximum HDMI AV Latency from 100ms to 500ms<br />
* Volume control can now be enabled/disabled on Klimax DSM, Akurate DSM, Majik DSM, Majik DS-I, and Sekrit DS-I<br />
* Added configuration option to turn auto selection of the Net Aux source on or off<br />
* Fixed defect: Dolby Digital Stream not muted on Hdmi input (all DSM products)<br />
* Fixed defect: Crash on Radio plyback (Japanese default list of stations)<br />
* Fixed defect: Surround volume stuck on maximum after a power cycle<br />
* Fixed defect: Distortion on surround/center channels<br />
* Fixed defect: Majik DSM device crash when HDMI is disabled<br />
* Fixed defect: HDMI 'crackle' problem<br />
* Konfig: installer now checks for .Net 4<br />
* Konfig: HDMI options now visible on MAC<br />
* Default source names now all uppercase (HDMI, SPDIF, TOSLINK)<br />
* Balance setting is no longer applied when headphones are active<br />
* Majik DSM (HDMI) main board now powered down in Standby<br />
* Added audio check functionality: press and hold the help key (or # key) on remote with device in standby and network cable removed (and device power cycled) to trigger the audio check.<br />
<br />
== Davaar 6 ==<br />
=== Davaar 6 Build 4 (4.6.4) Released on 17 April 2012 ===<br />
* Initial release for Majik DSM Mk2 (HDMI)<br />
* Konfig: added support for new HDMI parameters on Majik DSM Mk2 (HDMI)<br />
* Konfig: HDMI options now visible on MAC<br />
<br />
== Davaar 5 ==<br />
=== Davaar 5 Build 3 (4.5.3) Released on 14 December 2011 ===<br />
<br />
* Supports third party streaming protocol via the Net Aux source<br />
* Fixed bug on Klimax DSM: surround audio was not being passed through correctly to downstream AV receiver<br />
<br />
=== Davaar 5 Build 2 (4.5.2) Released on 12 December 2011 ===<br />
<br />
* Supports improved integration of DSM Systems with third-party surround sound systems (See [[HDMI_Setup|Setup documentation]])<br />
* Device lockup problems fixed (may result in device reboot instead)<br />
* Added support for seek on new [[REM_020| slimline handset]] using left and right navigation keys<br />
* Added support for stop on new [[REM_020| slimline handset]] using press and hold of pause key<br />
* Maintenance and bug fixes<br />
<br />
=== Davaar 5 Build 1 (4.5.1) Released on 16 November 2011 ===<br />
<br />
* Includes unreleased functionality from Davaar 4 beta for Akurate DSM and Majik DSM<br />
* Fixed intermittent Songcast dropouts on high bit-rate streams<br />
<br />
== Davaar 4 ==<br />
=== Davaar 4 Build 2 (4.4.2) Released on 1 November 2011 ===<br />
<br />
* Provides support for [http://oss.linn.co.uk/trac/wiki/Songcast Songcast app], which allows you to send any audio from your computer to your Linn DS player and get better sound from your music services and web pages<br />
* Fixed noise burst coming out of standby after power cycle<br />
* Fixed Majik DS-I clicks and pops when changing source (pre-out, speaker-out, and headphone-out)<br />
* Fixed problem where Kinsky volume can get out of step with Klimax Kontrol when startup volume is used<br />
* Changed clock used when Klimax DS Mk2, Majik DS-I, or Akurate DS Mk2 are receiving Songcast<br />
* External input track information (sample rate, etc) is now available on the device display<br />
* Source direct and video settings merged into source delay mode setting for simplicity<br />
* Added device update notifications setting (on or off)<br />
<br />
=== Davaar 4 Build 1 (4.4.1) Not Released ===<br />
<br />
== Davaar 3 ==<br />
=== Davaar 3 Build 3 (4.3.3) Released on 29 September 2011 ===<br />
<br />
* Fixed Majik DS-I click when changing source<br />
* Fixed volume discrepancy between analog source direct and indirect modes<br />
* Removed clock change when Klimax DS Mk2, Majik DS-I, or Akurate DS Mk2 are receiving Songcast<br />
<br />
=== Davaar 3 Build 2 (4.3.2) Released on 12 September 2011 ===<br />
<br />
* Changed clock used when Klimax DS Mk2, Majik DS-I, or Akurate DS Mk2 are receiving Songcast<br />
* Fixed rare Songcast failure<br />
* Improved Web configuration<br />
* Konfig: fixed discovery lockup problem for users running Vista and Norton<br />
<br />
=== Davaar 3 Build 1 (4.3.1) Released on 11 August 2011 ===<br />
<br />
* Potential fix for DS lockup and discovery issues<br />
* DHCP compliance and robustness improvements<br />
<br />
== Davaar 2 ==<br />
=== Davaar 2 Build 1 (4.2.1) Released on 04 August 2011 ===<br />
<br />
* Improved handling of low sample rate streams (32kHz and below).<br />
<br />
== Davaar 1 ==<br />
=== Davaar 1 Build 10 (4.1.10) Released on 27 April 2011 ===<br />
<br />
* Fixed defect that was causing the startup source activation to be inconsistent (source applied out of standby alternating between startup source and last used source)<br />
<br />
=== Davaar 1 Build 9 (4.1.9) Released on 26 April 2011 ===<br />
<br />
* Fixed #3163 - Device crashes after long pause<br />
* Fixed #3166 - Songcasting Sekrit TOS input fails intermittently<br />
<br />
=== Davaar 1 Build 8 (4.1.8) Released on 21 April 2011 ===<br />
<br />
* Fixed #3160: Search within a track causes an assert<br />
* Fixed #3161: Sender switching source w/o clock change gives no audio on rcvr<br />
* Fixed #3162: Assert - Thread.cpp 353: on startup on DS-I (semaphore count exceeded)<br />
* Fixed problem with audio glitch outputs immediately prior to start of audio when switching to a non direct external source<br />
<br />
=== Davaar 1 Build 7 (4.1.7) Released on 20 April 2011 ===<br />
<br />
* Fixed #3136: 'Click' switching from Playlist to Songcast on Klimax DS<br />
* Fixed #3156: Receiver lockup after sender power cycled<br />
* Webconfig now supports full range of configuration parameters<br />
<br />
=== Davaar 1 Build 6 (4.1.6) Released on 12 April 2011 ===<br />
<br />
* Added support for [[Songcast]] Large-scale mode ([[Songcast]] Sender Output Mode -> [[Multicast_Filtering|Multicast]])<br />
* Improved Songcast clock synchronisation<br />
* Fixed #3144: Songcast (multicast) - add receiver and ALL receivers scroll metadata<br />
* Fixed #3147: Potential lockup of device on removal of Songcast receiver<br />
* Fixed songcast receiver buffering when sender paused. Now reports waiting.<br />
<br />
=== Davaar 1 Build 5 (4.1.5) Released on 24 March 2011 ===<br />
<br />
* Fixed defect #3135: Songcast not songcasting Sekrit DS-I external inputs<br />
* Fixed defect #3119: Hiss on analogue sources<br />
* Fixed defect #3136: 'Click' switching from Playlist to Songcast on Klimax DS<br />
* Fixed defect #3138: Noise burst/click when selecting jukebox preset while playing<br />
* Balance configuration added to Konfig<br />
* Current delay preset selection added to Konfig<br />
* Majik DS-I TOS link output light now goes off when the output is disabled<br />
* Added extra headroom in up-sampling filter<br />
* Konfig: Restore to factory defaults now requires user confirmation<br />
* Sender preset number is now in the description field of the sender metadata (previously appended to start of name)<br />
* Beta documentation can be found here: http://docs.linn.co.uk/wiki/index.php/Beta:DsDavaar<br />
<br />
=== Davaar 1 Build 3 (4.1.3) Released on 17 March 2011 ===<br />
<br />
* Initial beta release of Davaar<br />
* Added [[Songcast|Songcast]] functionality. Songcast allows a DS to tune into another DS. A DS can songcast to more than one DS. Further, a DS can songcast no matter what source is selected.<br />
* Added OpenHome compatibility. OpenHome is an independent standard for networked home devices. Linn's DS devices are now fully compatible with the OpenHome Audio Visual (AV) specification. OpenHome AV compatibility will allow the DS to interoperate with other manufacturer's digitial streaming products and control points. <br />
* Added Auto play functionality (via Konfig option)<br />
* Added ability for device to power up into or out of standby (via Konfig option)<br />
* Requires latest Davaar beta version of [http://products.linn.co.uk/VersionInfo/Downloads/Beta Linn Konfig] to update (Available for Windows, Mac, and Linux platforms).<br />
* Requires latest Davaar beta version of [http://oss.linn.co.uk/trac/wiki/KinskyDesktop KinskyDesktop] to to control your device once it has been updated (Available for Windows, Mac, and Linux platforms). <br />
* Added ability to choose a fixed sample rate on digital outputs (88/96kHz or 176/192kHz)<br />
* Fixed digital output downsampling from 176/192kHz<br />
* Minimum lip sync delay is now 100ms<br />
* Added source 'Direct' functionality to allow external sources to achieve a zero latency delay (via Konfig option)<br />
* Fixed standby lockup issue<br />
* Various maintenance and bug fixes<br />
* Beta documentation can be found here: http://docs.linn.co.uk/wiki/index.php/Beta:DsDavaar<br />
<br />
__NOTOC__</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=ExaktSurround&diff=13819
ExaktSurround
2017-06-19T10:26:29Z
<p>Simonc: /* Subs */</p>
<hr />
<div>= Surround sound via Exakt =<br />
== Overview ==<br />
* Exakt surround allows a DSM to receive multi-channel audio over HDMI and play it through an Exakt system. It is usable on any DSM with HDMI inputs and Exakt outputs.<br />
<br />
* Any sensible speaker configuration is supported from 2.0 to 7.4.<br />
<br />
* No need for a dedicated AV processor.<br />
<br />
* No need to manually setup down-mixes or delays.<br />
<br />
* Audio must be delivered to the DSM as '''PCM'''. Most HDMI sources are capable of this; any that don’t (e.g. Apple TV) can be supported using a HDMI repeater that is capable of Dolby/DTS to PCM conversion (e.g. Oppo).<br><br />
<br />
* DSM models with analog as well as Exakt outputs can use the analog outputs to feed one or two non-Exakt speakers (e.g. Exakt fronts with analog surrounds for a 4.0 system).<br><br />
<br />
<!--* Songcast: The surround is downmixed to Stereo for Songcasting to other Linn DS/DSM players<br />
--><br />
* Each Exaktbox can support 1 or 2 loudspeakers<br />
<br />
[[image:Eaxkt-Surround.jpg|centre |600px]]<br />
Sample 5.2 system. Front speakers are Exakt, rear speakers are analogue but can be made Exakt with another Exaktbox.<br />
<br />
== Channel Assignment ==<br />
'''Ensure that HDMI is ENABLED on the Linn DSM to show all surround channels'''<br><br />
Go to the Exakt tab in your DS configuration page. <br />
[[File:ExaktSurroundExaktTab.png]]<br />
<br><br><br><br />
System configuration is largely like that for a stereo Exakt system: Exaktboxes are configured in the normal way then all channel assignments can be made. Note that the channel options for each speaker now contain all speaker positions for a 7.1 system. <br><br />
[[File:ExaktSurroundChannelOptions.png]]<br />
<br><br><br><br />
If you want to use analog outputs from your DSM for 1 or 2 surround channels, select which speaker(s) are connected then assign channels for these too.<br><br />
[[File:ExaktSurroundAnalogOutputs.png]]<br />
<br><br><br><br />
System setup is very flexible but must follow some basic rules:<br />
* All systems must contain front left & front right<br />
* If rear or surround speakers are present, they must have both left & right<br />
* Surround speakers (i.e., back speakers in a 5.1 setup) must be present before rears (i.e., back speakers in a 7.1 setup) can be used<br />
* Centre and sub are optional but can be used with any other setup<br />
<br><br><br />
Once all channels have been selected, press the Apply button. <br><br />
[[File:ExaktSurroundChannelsApply.png]]<br />
<br><br><br><br />
Note that the configuration for all Exakt devices must be applied together. (This allows Konfig to validate the speaker configuration for the overall system, enforcing the rules above and providing meaningful feedback if an invalid speaker configuration has been selected.)<br />
<br><br />
You can now use the Test button beside each speaker to confirm that channel allocation is correct. If you make any changes (e.g. reversing left/right for a pair of speakers), press Apply again.<br />
<br><br />
No manual setup of down-mix mode is required. Konfig will automatically apply the most appropriate down-mix based on the channels assigned to your speakers.<br />
<br />
== Subs ==<br />
A subwoofer can be assigned one of 4 possible channels:<br />
* '''Front left'''<br />
* '''Front right'''<br />
* '''Mono'''<br />
* '''LFE'''<br />
<br />
Selecting '''front left''' (or right) instructs the sub to play the same content as the front left (or right) speaker. You should only select this if you have 2 subs, one assigned to each left and right.<br />
<br />
Selecting '''Mono''' instructs the sub to play a down-mix of both front left and right.<br />
<br />
When using a front left/right sub pair, a mono sub, or no sub, any LFE content will be directed to front left and right speakers.<br />
<br />
Selecting '''LFE''' instructs the sub to only play '''LFE''' content for multi-channel tracks. ''An LFE sub will be silent when playing stereo music.''<br />
<br />
Sub channel configurations are mutually exclusive. Only one type of sub configuration may be present on any system (a sub configuration counts as a front left/right pair, Mono, or LFE).<br />
<br />
Note that a sub on an analogue output will only be used for HDMI sources. (Analogue and Exakt channels cannot be synchronised on Playlist or other stereo sources.)<br />
<br />
== Optimisation ==<br />
The process for this is equivalent to a stereo system, just for more speakers.<br />
<br />
== Delays ==<br />
No setup of speaker delays is required. The linear phase audio delivered by Exakt means that the correct delays have been applied automatically.<br />
<br />
DSM HDMI inputs will default to minimal latency. If you require additional delay for lip sync, the process for this is unchanged – set the delay mode for the relevant HDMI source to “Video sync” then adjust latency using either the Ir remote or the configuration tab in Konfig.<br />
<br />
== Volume Equalisation ==<br />
Once Space+ Optimisation has been applied, you can apply volume offsets to equalise volume between speakers in the system.<br><br />
[[File:ExaktSurroundVolOffsetsEntry.png]]<br />
<br><br><br><br />
Pressing the Play icon beside any speaker will play pink noise through that speaker.<br><br />
[[File:ExaktSurroundVolOffsetsPlayIcon.png]]<br />
<br><br><br><br />
The +/- buttons beside this can be used to adjust volume for that speaker.<br><br />
[[File:ExaktSurroundVolOffsetsPlusMinus.png]]<br />
<br><br><br><br />
Once you have completed setting volume offsets, press Apply.<br><br />
[[File:ExaktSurroundVolOffsetsApply.png]]<br />
<br />
== Switching between surround and stereo modes ==<br />
The DSM will automatically switch between stereo and surround content. No user changes are required.<br />
<br />
== Songcast ==<br />
Songcast of surround streams is not currently supported. A future release will send a stereo down-mix of surround content to any songcast receivers. This will not affect any down-mix applied in your surround system.<br />
<br />
= FAQ's =<br />
'''Q1''': The Klimax Exaktbox has 6 outputs, can I use each output to drive a loudspeaker in my 5.1 surround system?<br><br />
<br />
'''A1''': No, the Exaktboxes are designed with the processor resources,(Exakt Engine), for one or two loudspeaker digital crossovers. Adding more loudspeakers channels and delays will not make the best use of the resources.<br><br><br />
<br />
'''Q2''': I have an exclamation mark icon ('''!''') on my DSM display. What does this mean?<br><br />
<br />
'''A2''': Your DSM has not detected all the speakers that were originally configured for surround. Open Konfig, select your DSM then the Exakt tab to see which speakers have been detected.<br />
<br>If you have removed a speaker from your system (e.g. a centre channel), you may need to temporarily change channel assignment of another speaker. When you return this to its original value, Konfig will allow you to save the new surround configuration.<br />
<br />
'''Q3''': Do my front left/right speakers always have to be Exakt speakers?<br><br />
<br />
'''A3''': No you can configure the analogue outputs of you Majik/Akurate/Klimax DSM to feed the front left/right and the Exaktbox/Exakt speakers for any other channels. However this will not be the best Musical option as the passive speaker will never sound as good as the fully Exakt'ed speakers.</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=ExaktSurround&diff=13818
ExaktSurround
2017-06-19T10:26:07Z
<p>Simonc: /* Subs */</p>
<hr />
<div>= Surround sound via Exakt =<br />
== Overview ==<br />
* Exakt surround allows a DSM to receive multi-channel audio over HDMI and play it through an Exakt system. It is usable on any DSM with HDMI inputs and Exakt outputs.<br />
<br />
* Any sensible speaker configuration is supported from 2.0 to 7.4.<br />
<br />
* No need for a dedicated AV processor.<br />
<br />
* No need to manually setup down-mixes or delays.<br />
<br />
* Audio must be delivered to the DSM as '''PCM'''. Most HDMI sources are capable of this; any that don’t (e.g. Apple TV) can be supported using a HDMI repeater that is capable of Dolby/DTS to PCM conversion (e.g. Oppo).<br><br />
<br />
* DSM models with analog as well as Exakt outputs can use the analog outputs to feed one or two non-Exakt speakers (e.g. Exakt fronts with analog surrounds for a 4.0 system).<br><br />
<br />
<!--* Songcast: The surround is downmixed to Stereo for Songcasting to other Linn DS/DSM players<br />
--><br />
* Each Exaktbox can support 1 or 2 loudspeakers<br />
<br />
[[image:Eaxkt-Surround.jpg|centre |600px]]<br />
Sample 5.2 system. Front speakers are Exakt, rear speakers are analogue but can be made Exakt with another Exaktbox.<br />
<br />
== Channel Assignment ==<br />
'''Ensure that HDMI is ENABLED on the Linn DSM to show all surround channels'''<br><br />
Go to the Exakt tab in your DS configuration page. <br />
[[File:ExaktSurroundExaktTab.png]]<br />
<br><br><br><br />
System configuration is largely like that for a stereo Exakt system: Exaktboxes are configured in the normal way then all channel assignments can be made. Note that the channel options for each speaker now contain all speaker positions for a 7.1 system. <br><br />
[[File:ExaktSurroundChannelOptions.png]]<br />
<br><br><br><br />
If you want to use analog outputs from your DSM for 1 or 2 surround channels, select which speaker(s) are connected then assign channels for these too.<br><br />
[[File:ExaktSurroundAnalogOutputs.png]]<br />
<br><br><br><br />
System setup is very flexible but must follow some basic rules:<br />
* All systems must contain front left & front right<br />
* If rear or surround speakers are present, they must have both left & right<br />
* Surround speakers (i.e., back speakers in a 5.1 setup) must be present before rears (i.e., back speakers in a 7.1 setup) can be used<br />
* Centre and sub are optional but can be used with any other setup<br />
<br><br><br />
Once all channels have been selected, press the Apply button. <br><br />
[[File:ExaktSurroundChannelsApply.png]]<br />
<br><br><br><br />
Note that the configuration for all Exakt devices must be applied together. (This allows Konfig to validate the speaker configuration for the overall system, enforcing the rules above and providing meaningful feedback if an invalid speaker configuration has been selected.)<br />
<br><br />
You can now use the Test button beside each speaker to confirm that channel allocation is correct. If you make any changes (e.g. reversing left/right for a pair of speakers), press Apply again.<br />
<br><br />
No manual setup of down-mix mode is required. Konfig will automatically apply the most appropriate down-mix based on the channels assigned to your speakers.<br />
<br />
== Subs ==<br />
A subwoofer can be assigned one of 4 possible channels:<br />
* '''Front left'''<br />
* '''Front right'''<br />
* '''Mono'''<br />
* '''LFE'''<br />
<br />
Selecting '''front left''' (or right) instructs the sub to play the same content as the front left (or right) speaker. You should only select this if you have 2 subs, one assigned to each left and right.<br />
<br />
Selecting '''Mono''' instructs the sub to play a down-mix of both front left and right.<br />
<br />
When using a front left/right sub pair, a mono sub, or no sub, any LFE content will be directed to front left and right speakers.<br />
<br />
Selecting '''LFE''' instructs the sub to only play '''LFE''' content for multi-channel tracks. ''An LFE sub will be silent when playing stereo music.''<br />
<br />
Note that a sub on an analogue output will only be used for HDMI sources. (Analogue and Exakt channels cannot be synchronised on Playlist or other stereo sources.)<br />
<br />
Sub channel configurations are mutually exclusive. Only one type of sub configuration may be present on any system (a sub configuration counts as a front left/right pair, Mono, or LFE).<br />
<br />
== Optimisation ==<br />
The process for this is equivalent to a stereo system, just for more speakers.<br />
<br />
== Delays ==<br />
No setup of speaker delays is required. The linear phase audio delivered by Exakt means that the correct delays have been applied automatically.<br />
<br />
DSM HDMI inputs will default to minimal latency. If you require additional delay for lip sync, the process for this is unchanged – set the delay mode for the relevant HDMI source to “Video sync” then adjust latency using either the Ir remote or the configuration tab in Konfig.<br />
<br />
== Volume Equalisation ==<br />
Once Space+ Optimisation has been applied, you can apply volume offsets to equalise volume between speakers in the system.<br><br />
[[File:ExaktSurroundVolOffsetsEntry.png]]<br />
<br><br><br><br />
Pressing the Play icon beside any speaker will play pink noise through that speaker.<br><br />
[[File:ExaktSurroundVolOffsetsPlayIcon.png]]<br />
<br><br><br><br />
The +/- buttons beside this can be used to adjust volume for that speaker.<br><br />
[[File:ExaktSurroundVolOffsetsPlusMinus.png]]<br />
<br><br><br><br />
Once you have completed setting volume offsets, press Apply.<br><br />
[[File:ExaktSurroundVolOffsetsApply.png]]<br />
<br />
== Switching between surround and stereo modes ==<br />
The DSM will automatically switch between stereo and surround content. No user changes are required.<br />
<br />
== Songcast ==<br />
Songcast of surround streams is not currently supported. A future release will send a stereo down-mix of surround content to any songcast receivers. This will not affect any down-mix applied in your surround system.<br />
<br />
= FAQ's =<br />
'''Q1''': The Klimax Exaktbox has 6 outputs, can I use each output to drive a loudspeaker in my 5.1 surround system?<br><br />
<br />
'''A1''': No, the Exaktboxes are designed with the processor resources,(Exakt Engine), for one or two loudspeaker digital crossovers. Adding more loudspeakers channels and delays will not make the best use of the resources.<br><br><br />
<br />
'''Q2''': I have an exclamation mark icon ('''!''') on my DSM display. What does this mean?<br><br />
<br />
'''A2''': Your DSM has not detected all the speakers that were originally configured for surround. Open Konfig, select your DSM then the Exakt tab to see which speakers have been detected.<br />
<br>If you have removed a speaker from your system (e.g. a centre channel), you may need to temporarily change channel assignment of another speaker. When you return this to its original value, Konfig will allow you to save the new surround configuration.<br />
<br />
'''Q3''': Do my front left/right speakers always have to be Exakt speakers?<br><br />
<br />
'''A3''': No you can configure the analogue outputs of you Majik/Akurate/Klimax DSM to feed the front left/right and the Exaktbox/Exakt speakers for any other channels. However this will not be the best Musical option as the passive speaker will never sound as good as the fully Exakt'ed speakers.</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Klimax_Renew_DS&diff=13709
Klimax Renew DS
2017-06-01T12:37:10Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:RenewDsDevice.png|right|435x143px]]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Renew DS<br />
<br />
* ''Date of Introduction:'' May 2011<br />
<br />
* ''Type:'' Digital music player<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Klimax_DS_Quickstart.pdf Product Information / Quickstart Guide (for KlimaxDS)]<br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Linn_Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/DS_&_REM_019 Remote Control manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:Klimax DS rear.jpg|center|700x241px|Image:Klimax_DS_rear.jpg]] <br><br />
<br />
# '''MAINS INPUT''' - For connection to the mains supply.<br />
# '''POWER SWITCH'''- For switching the power to the unit on and off<br />
# '''ETHERNET''' - For connecting the unit to the network.<br />
# '''RS232 PORTS''' - For connection to Linn source products without ethernet ports. Please note: Early versions on the Renew DS has RS232 port 1 & 2 labels swopped around. If you have any difficulty, please test this connection using the Konfig-Diagnostics<br />
# '''FALLBACK''' - Used when reprogramming the unit.<br />
# '''EARTH GROUND''' - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.<br />
# '''UNBALANCED OUT RIGHT, LEFT''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<br />
# '''BALANCED OUT RIGHT, LEFT''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.<br />
<br />
<BR><br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:RenewDsDevice.png|center|700x130px|Image:RenewDsDevice.png]]<br />
<br />
<br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Klimax_DSM_(Exakt_Variant)&diff=13708
Klimax DSM (Exakt Variant)
2017-06-01T12:37:00Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:KlimaDS 3Q 02 low res.jpg|right|435x143px]]<br />
<br />
== '''Getting Started''' == <br />
[http://www.linn.co.uk/go/klimax '''www.linn.co.uk/go/klimax''' ]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Klimax DSM/1<br />
<br />
* ''Date of Introduction:''June 2014 - Sept 2016<br />
* ''Type:'' Integrated digital music player and preamplifier<br />
* [http://small.linncdn.com/product-catalogue/documents/Linn_Klimax_DSM_Product_Information.pdf Product Information sheet]<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
** 192k/24bit Analogue to Digital convertion for Analogue input<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Klimax_DSM_Quickstart.pdf Quickstart Guide]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[[Surround_Sound| Surround Sound]]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/REM_020 DSM Remote control manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms & Conditions]<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Klimax_DSM_Product_Information.pdf Product information]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:Kli DSM 1 rear.jpg|center|723x326px|Image:Kli DSM 1 rear.jpg]] <br><br />
<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''TOSLINK IN'''- To connect sources with Toslink (optical) digital outputs. <br />
# '''ETHERNET''' - To connect to a network.<br />
# '''SPDIF IN''' - To connect sources with Spdif digital outputs. <br />
# [[Exakt_link |'''EXAKT LINK''']]- To connect to Exakt compatible devices <br />
# '''EARTH GROUND''' - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.<br />
# '''BALANCED IN RIGHT, LEFT''' - To connect sources with balanced (XLR) outputs. <sup>1 2</sup> (input transformer can be by-passed using Konfig)<br />
# '''BALANCED OUT RIGHT, LEFT''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.<sup>2</sup><br />
# '''UNBALANCED OUT RIGHT, LEFT''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<sup>2</sup><br />
# '''HDMI OUT''' - To connect to a display device with HDMI inputs.<br />
# '''HDMI IN 1, 2, 3''' - To connect sources with HDMI outputs.<br />
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming the unit).<br />
<br />
<br />
<BR><br />
'''<sup>1</sup>''' XLR to RCA adaptors are supplied for connecting sources with unbalanced outputs. <br>Input transformer can be enabled or disabled in [[Konfig_Manual#Input_level.2C_Unity_Gain.2C_Volume_offset | Konfig setup]]<br><br />
Note: Configuring to RCA will add a ground link to the audio tranformer causing an imbalance in the HOT and COLD XLR connections<br><br><br />
'''<sup>2</sup>''' Set to DELAY mode > DIRECT to pass through an Analogue volume control to the Analogue out.<br><br />
Only use the XLR(8) output OR the RCA(9) output, never use both outputs as the RCA will degrade the XLR(8) output audio.<br><br />
<br />
=== [[Exakt_link | '''EXAKT LINK connection''']]===<br />
Check [[Exakt_link | '''HERE''']] for information of Exakt link connection<br />
<br />
<br><br />
[[Image:Kli_DSM_1_rear_differences.jpg|right|350px]]<br> <br />
<br />
=== Klimax DSM/1 differences ===<br />
<br><br />
Changes to Klimax DSM/1 compared to the Klimax DSM/0<br />
# - '''2off Exakt link sockets''' - To connect speakers/Tuneboxes with Exakt Link. This will allow audio from both the Analogue output and Exakt outputs.<br />
# - '''1off SPDIF input''' - The Klimax DSM/0 has 2off SPDIF inputs<br />
<br />
<br><br><br />
<br />
== '''Front Panel''' ==<br />
<br />
[[Image:Klimax DSM front.jpg|center|700x206px|Image:Klimax_DSM_front.jpg]]<br />
<br><br />
<br />
# '''DISPLAY''' <br />
# '''ON / OFF SWITCH''' <br />
<br />
<br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
* [[Structured_Wiring | Structured Wiring information]]<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]<br />
<br />
== '''Exakt Options''' ==<br />
Exakt usage the the Exakt Klimax speakers can be found at [http://docs.linn.co.uk/wiki/index.php/Klimax_Exakt_System Klimax Exakt System]<br />
<br />
<br />
==Trouble shooting==<br />
Check [[ExaKt_Trouble_shooting | Exakt trouble shooting]]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Klimax_Exakt_DSM&diff=13707
Klimax Exakt DSM
2017-06-01T12:36:53Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:KlimaDS 3Q 02 low res.jpg|right|435x143px]]<br />
<br />
== '''Getting Started''' == <br />
[http://www.linn.co.uk/go/klimax '''www.linn.co.uk/go/klimax''' ]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Klimax Exakt DSM<br />
<br />
* ''Date of Introduction:''Sept 2013<br />
* ''Type:'' Integrated digital music player and preamplifier<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
** Part of the [[Klimax Exakt System]]<br />
** 192k/24bit Analogue to Digital convertion for Analogue input<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
<!--[http://small.linncdn.com/product-catalogue/documents/Linn_Klimax_DSM_Quickstart.pdf Quickstart Guide]--><br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[[Surround_Sound| Surround Sound]]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/REM_020 DSM Remote control manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms & Conditions]<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Klimax_DSM_Product_Information.pdf Product information]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:Kli_EXakt_DSM_rear.jpg|center|735x242px|Image:Klimax Exakt DSM]] <br><br />
<br />
# '''ANALOGUE IN RIGHT, LEFT''' - To connect sources with phono outputs.<br />
# '''BALANCED IN RIGHT, LEFT''' - To connect sources with balanced (XLR) outputs.<br />
# '''EXAKT LINK'''- To connect to Exakt compatible devices<br />
# '''SPDIF IN''' - To connect sources with Spdif digital outputs. <br />
# '''ETHERNET''' - To connect to a network.<br />
# '''TOSLINK IN'''- To connect sources with Toslink (optical) digital outputs.<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming the unit).<br />
# '''HDMI IN 1, 2, 3''' - To connect sources with HDMI outputs.<br />
# '''HDMI OUT''' - To connect to a display device with HDMI inputs.<br />
<br />
<br />
<BR><br />
=== LED Status ===<br />
Each of the Exakt Link ports have two status LED's. The function of these LED's is given below:<br />
<br />
[[Image:ExaktPortLED1-2.jpg|right|200x200px|Exakt Port LED's]] <br />
<br />
{| border="1" cellspacing="0" cellpadding="0" width="65%" align="LEFT"<br />
|-<br />
| bgcolor="#cccccc" width="15%" align="center" | <br />
'''''LED'''''<br />
<br />
| bgcolor="#cccccc" width="20%" align="center" | <br />
'''''OFF'''''<br />
<br />
| bgcolor="#cccccc" width="20%" align="center" | <br />
'''''ON'''''<br />
<br />
| bgcolor="#cccccc" width="20%" align="center" | <br />
'''''Flash / Blink'''''<br />
<br />
|-<br />
| align="center" | '''LED0'''<br />
| align="center" | Link Port Disabled<br />
| align="center" | Link Port Enabled<br />
| align="center" | n/a<br />
<br />
|-<br />
| align="center" | '''LED1'''<br />
| align="center" | No Link<br />
| align="center" | Product Discovered<br />
| align="center" | Activity<br />
<br />
|}<br />
<br />
<br />
<BR><BR><BR><BR><BR><BR><BR><br />
<br />
== '''Front Panel''' ==<br />
<br />
[[Image:Klimax DSM front.jpg|center|700x206px|Image:Klimax_DSM_front.jpg]]<br />
<br><br />
<br />
# '''DISPLAY''' <br />
# '''ON / OFF SWITCH''' <br />
<br />
<br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
* [[Structured_Wiring | Structured Wiring information]]<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]<br />
<br />
== '''Exakt Options''' ==<br />
Exakt usage the the Exakt Klimax speakers can be found at [http://docs.linn.co.uk/wiki/index.php/Klimax_Exakt_System Klimax Exakt System]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Klimax_DSM&diff=13706
Klimax DSM
2017-06-01T12:36:44Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:KlimaDS 3Q 02 low res.jpg|right|435x143px]]<br />
<br />
== '''Getting Started''' == <br />
[http://www.linn.co.uk/go/klimax '''www.linn.co.uk/go/klimax''' ]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Klimax DSM<br />
<br />
* ''Date of Introduction:'' October 2011 - May 2013<br />
::Replaced by [[Klimax DSM (Exakt Variant) | Klimax DSM/1]]<br><br />
* ''Type:'' Integrated digital music player and preamplifier<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
** 96k/24bit Analogue to Digital convertion for Analogue input<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Klimax_DSM_Quickstart.pdf Quickstart Guide]<br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/REM_020 DSM Remote control manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]<br />
<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms & Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== HDMI Setup ==<br />
<br />
[[HDMI Setup]]<br />
<br />
[[DSM Audio Latencies Explained]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:Klimax DSM rear.jpg|center|723x326px|Image:Klimax_DSM_rear.jpg]] <br><br />
<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming the unit).<br />
# '''TOSLINK IN'''- To connect sources with Toslink (optical) digital outputs. <br />
# '''ETHERNET''' - To connect to a network.<br />
# '''SPDIF IN''' - To connect sources with Spdif digital outputs. <br />
# '''BALANCED IN RIGHT, LEFT''' - To connect sources with balanced (XLR) outputs.<sup>1 2</sup><br />
# '''BALANCED OUT RIGHT, LEFT''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.<sup>2</sup><br />
# '''UNBALANCED OUT RIGHT, LEFT''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<br />
# '''EARTH GROUND''' - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.<br />
# '''HDMI IN 1, 2, 3''' - To connect sources with HDMI outputs.<br />
# '''HDMI OUT''' - To connect to a display device with HDMI inputs.<br />
<br />
<BR><br />
'''<sup>1</sup>''' XLR to RCA adaptors are supplied for connecting sources with unbalanced outputs.<br><br />
'''<sup>2</sup>''' Set to DELAY mode > DIRECT to pass through an Analogue volume control to the Analogue out.<br />
<br><br />
<br />
== '''Front Panel''' ==<br />
<br />
[[Image:Klimax DSM front.jpg|center|700x206px|Image:Klimax_DSM_front.jpg]]<br />
<br><br />
<br />
# '''DISPLAY''' <br />
# '''ON / OFF SWITCH''' <br />
<br />
<br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
* [[Structured_Wiring | Structured Wiring information]]<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Klimax_DSM_(KATALYST_Variant)&diff=13705
Klimax DSM (KATALYST Variant)
2017-06-01T12:36:36Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:KlimaDS 3Q 02 low res.jpg|right|435x143px]]<br />
<br />
== '''Getting Started''' == <br />
[http://www.linn.co.uk/go/klimax '''www.linn.co.uk/go/klimax''' ]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Klimax DSM/2<br />
<br />
* ''Date of Introduction:'' Sept 2016<br />
* ''Type:'' Integrated digital music player and preamplifier<br />
* [http://small.linncdn.com/product-catalogue/documents/Linn_Klimax_DSM_Product_Information.pdf Product Information sheet]<br />
<br />
* ''Features'' <br />
** [https://www.linn.co.uk/technology/katalyst Katalyst DAC Architecture] <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
** 192k/24bit Analogue to Digital convertion for Analogue input<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Klimax_DSM_Quickstart.pdf Quickstart Guide]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[[Surround_Sound| Surround Sound]]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/REM_020 DSM Remote control manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms & Conditions]<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Klimax_DSM_Product_Information.pdf Product information]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:Kli DSM 1 rear.jpg|center|723x326px|Image:Kli DSM 1 rear.jpg]] <br><br />
<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''TOSLINK IN'''- To connect sources with Toslink (optical) digital outputs. <br />
# '''ETHERNET''' - To connect to a network.<br />
# '''SPDIF IN or SPDIF OUT''' - Configured in Konfig as either an digital input or digital output. (Default: Input)<br />
# [[Exakt_link |'''EXAKT LINK''']]- To connect to Exakt compatible devices <br />
# '''EARTH GROUND''' - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.<br />
# '''BALANCED IN RIGHT, LEFT''' - To connect sources with balanced (XLR) outputs. <sup>1 2</sup> (input transformer can be by-passed using Konfig)<br />
# '''BALANCED OUT RIGHT, LEFT''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.<sup>2</sup><br />
# '''UNBALANCED OUT RIGHT, LEFT''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<sup>2</sup><br />
# '''HDMI OUT''' - To connect to a display device with HDMI 1.4 & 2.0 inputs.<br />
# '''HDMI IN 1, 2, 3''' - To connect sources with HDMI 1.4 & 2.0 outputs.<br />
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming the unit).<br />
<br />
<br />
<BR><br />
'''<sup>1</sup>''' XLR to RCA adaptors are supplied for connecting sources with unbalanced outputs. <br>Input transformer can be enabled or disabled in [[Konfig_Manual#Input_level.2C_Unity_Gain.2C_Volume_offset | Konfig setup]]<br><br />
Note: Configuring to RCA will add a ground link to the audio tranformer causing an imbalance in the HOT and COLD XLR connections<br><br><br />
'''<sup>2</sup>''' Only use the XLR(8) output OR the RCA(9) output, never use both outputs as the RCA will degrade the XLR(8) output audio.<br><br />
<br />
=== [[Exakt_link | '''EXAKT LINK connection''']]===<br />
Check [[Exakt_link | '''HERE''']] for information of Exakt link connection<br />
<br />
== '''Front Panel''' ==<br />
<br />
[[Image:Klimax DSM front.jpg|center|700x206px|Image:Klimax_DSM_front.jpg]]<br />
<br><br />
<br />
# '''DISPLAY''' <br />
# '''ON / OFF SWITCH''' <br />
<br />
<br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
* [[Structured_Wiring | Structured Wiring information]]<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]<br />
<br />
== '''Exakt Options''' ==<br />
Exakt usage the the Exakt Klimax speakers can be found at [http://docs.linn.co.uk/wiki/index.php/Klimax_Exakt_System Klimax Exakt System]<br />
<br />
<br />
==Trouble shooting==<br />
Check [[ExaKt_Trouble_shooting | Exakt trouble shooting]]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Klimax_DS_(Exakt_Variant)&diff=13704
Klimax DS (Exakt Variant)
2017-06-01T12:35:11Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:KlimaDS 3Q 02 low res.jpg|right|435x143px]]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Klimax DS/2<br />
<br />
* ''Date of Introduction:'' April 2015 - Sept 2016<br />
<br />
* ''Type:'' Digital music player with Exakt Link capability<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
** [http://docs.linn.co.uk/wiki/index.php/Klimax_Exakt_System Exakt system]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Klimax_DS_Quickstart.pdf Quickstart Guide]<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Klimax_DS_Product_Information.pdf Product Information Sheet]<br />
<br />
[[Space_Optimsation | Space Optimisation]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/REM_020 Remote Control manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:Klimax_DS2_Rear.jpg|center|700x241px|Image:Klimax_DS2_Rear.jpg]] <br><br />
<br />
# '''MAINS INPUT''' - For connection to the mains supply.<br />
# '''EXAKT LINK'''- For connection of Exakt products (Exakt speakers/ExaktBox).<br />
# '''ETHERNET''' - For connecting the unit to the network.<br />
# '''RS232 PORTS''' - For connection to Linn source products without ethernet ports.<br />
# '''FALLBACK''' - Used when reprogramming the unit.<br />
# '''EARTH GROUND''' - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.<br />
# '''UNBALANCED OUT RIGHT, LEFT''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<br />
# '''BALANCED OUT RIGHT, LEFT''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.<br />
<br />
<BR><br />
=== [[Exakt_link | '''EXAKT LINK connection''']]===<br />
Check [[Exakt_link | '''HERE''']] for information of Exakt link connection<br />
<br />
<br><br />
<br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:KlimaxDS2_Front.jpg|center|700x241px|Image:KlimaxDS2_Front.jpg]]<br />
<br />
# '''POWER SWITCH'''- For switching the power to the unit on and off<br />
<br />
<br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
<br />
== '''Exakt Options''' ==<br />
Exakt usage the the Exakt Klimax speakers can be found at [http://docs.linn.co.uk/wiki/index.php/Klimax_Exakt_System Klimax Exakt System]<br />
<br />
To enable Exakt options on the Exakt DS ensure that the '''internal volume control''' is turn '''ON''' in Konfig.<br />
<br />
==Trouble shooting==<br />
Check [[ExaKt_Trouble_shooting | Exakt trouble shooting]]<br />
<br />
To enable Exakt options on the Exakt DS ensure that the '''internal volume control''' is turn '''ON''' in Konfig. <br />
<br />
<br />
<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Klimax_DS&diff=13703
Klimax DS
2017-06-01T12:35:04Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:KlimaDS 3Q 02 low res.jpg|right|435x143px]]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Klimax DS<br />
<br />
* ''Date of Introduction:'' <br />
:: Klimax DS/0 - July 2007 - March 2011<br />
:: Klimax DS/1 - April 2011 - April 2015 (difference: improved performance Audio board)<br />
<br />
* ''Type:'' Digital music player<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Klimax_DS_Quickstart.pdf Quickstart Guide]<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Klimax_DS_Product_Information.pdf Product Information Sheet]<br />
<br />
[[Space_Optimsation | Space Optimisation]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/DS_&_REM_019 Remote Control manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:Klimax DS rear.jpg|center|700x241px|Image:Klimax_DS_rear.jpg]] <br><br />
<br />
# '''MAINS INPUT''' - For connection to the mains supply.<br />
# '''POWER SWITCH'''- For switching the power to the unit on and off<br />
# '''ETHERNET''' - For connecting the unit to the network.<br />
# '''RS232 PORTS''' - For connection to Linn source products without ethernet ports.<br />
# '''FALLBACK''' - Used when reprogramming the unit.<br />
# '''EARTH GROUND''' - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.<br />
# '''UNBALANCED OUT RIGHT, LEFT''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<br />
# '''BALANCED OUT RIGHT, LEFT''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.<br />
<br />
<BR><br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:KlimaxDS Front low res.jpg|center|700x130px|Image:KlimaxDS_Front_low_res.jpg]]<br />
<br />
<br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Klimax_DS_(KATALYST)&diff=13702
Klimax DS (KATALYST)
2017-06-01T12:34:58Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:KlimaDS 3Q 02 low res.jpg|right|435x143px]]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Klimax DS/3<br />
<br />
* ''Date of Introduction:'' Sept 2016<br />
<br />
* ''Type:'' Digital music player with Exakt Link capability<br />
<br />
* ''Features'' <br />
** [https://www.linn.co.uk/technology/katalyst Katalyst DAC Architecture] <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
** [http://docs.linn.co.uk/wiki/index.php/Klimax_Exakt_System Exakt system]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Klimax_DS_Quickstart.pdf Quickstart Guide]<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Klimax_DS_Product_Information.pdf Product Information Sheet]<br />
<br />
[[Space_Optimsation | Space Optimisation]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/REM_020 Remote Control manual]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:Klimax_DS2_Rear.jpg|center|700x241px|Image:Klimax_DS2_Rear.jpg]] <br><br />
<br />
# '''MAINS INPUT''' - For connection to the mains supply.<br />
# '''EXAKT LINK'''- For connection of Exakt products (Exakt speakers/ExaktBox).<br />
# '''ETHERNET''' - For connecting the unit to the network.<br />
# '''RS232 PORT''' - For connection to Linn pre-amps without Ethernet ports.<br />
# '''FALLBACK''' - Used when reprogramming the unit.<br />
# '''EARTH GROUND''' - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.<br />
# '''UNBALANCED OUT RIGHT, LEFT''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<br />
# '''BALANCED OUT RIGHT, LEFT''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.<br />
<br />
<BR><br />
=== [[Exakt_link | '''EXAKT LINK connection''']]===<br />
Check [[Exakt_link | '''HERE''']] for information of Exakt link connection<br />
<br />
<br><br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:KlimaxDS2_Front.jpg|center|700x241px|Image:KlimaxDS2_Front.jpg]]<br />
<br />
# '''POWER SWITCH'''- For switching the power to the unit on and off<br />
<br />
<br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
<br />
== '''Exakt Options''' ==<br />
Exakt usage the the Exakt Klimax speakers can be found at [http://docs.linn.co.uk/wiki/index.php/Klimax_Exakt_System Klimax Exakt System]<br />
<br />
To enable Exakt options on the Exakt DS ensure that the '''internal volume control''' is turn '''ON''' in Konfig.<br />
<br />
==Trouble shooting==<br />
Check [[ExaKt_Trouble_shooting | Exakt trouble shooting]]<br />
<br />
To enable Exakt options on the Exakt DS ensure that the '''internal volume control''' is turn '''ON''' in Konfig. <br />
<br />
<br />
<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Akurate_Renew_DS&diff=13701
Akurate Renew DS
2017-06-01T12:34:32Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:AkurateRenewFront.jpg|right|360px]]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Akurate Renew DS<br />
<br />
* ''Date of Introduction:'' July 2012<br />
<br />
* ''Type:'' Digital music player<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/DS_&_REM_019 Remote Control manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]<br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:Akurate DS rear v2.jpg|center|700px]] <br><br />
<br />
# '''POWER SWITCH'''- Switches the power on/off<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.<br />
# '''ETHERNET''' - To connect to the network.<br />
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming).<br />
# '''RS232 PORTS''' - To connect to other Linn products without ethernet ports.<br />
# '''BALANCED AUDIO OUTPUTS''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.<br />
# '''UNBALANCED AUDIO OUTPUTS''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:AkurateRenewFront.jpg|center|700px]]<br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Akurate_DSM_(Exakt_Variant)&diff=13700
Akurate DSM (Exakt Variant)
2017-06-01T12:34:25Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:AkurateKontrolFrontTop.jpg|right|350px]]<br />
<br />
== '''Getting Started''' == <br />
[http://www.linn.co.uk/go/akurate '''www.linn.co.uk/go/akurate''' ]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Akurate DSM/1<br />
<br />
* ''Date of Introduction:'' June 2014 - Sept 2016<br />
<br />
* ''Type:'' Integrated digital music player and preamplifier<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Akurate_DSM_Quickstart.pdf Quickstart Guide]<br />
<br />
[[Kazoo_Manual | Linn Kazoo User Manual]]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/REM_020 DSM Remote control manual]<br />
<br />
<!--[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]--><br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[[Surround_Sound| Surround Sound]]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:Akurate DSM 1 rear.jpg|center|700px]]<br />
<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming).<br />
# '''ETHERNET''' - To connect to a network.<br />
# '''EXAKT LINK'''- To connect to Exakt compatible devices<br />
# '''ANALOGUE INPUTS''' (XLR, line level) - To connect sources with balanced (XLR) outputs.<sup>2</sup><br />
# '''ANALOGUE INPUTS''' (RCA, phono/line level) - To connect a turntable or line level source with unbalanced (RCA) outputs.<sup>1</sup> <sup>2</sup> (Default MC phono)<br />
# '''PHONO GROUND''' - To connect to a turntable grounding terminal. <br />
# '''ANALOGUE OUTPUTS''' (XLR,variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.<sup>2</sup><br />
# '''ANALOGUE OUTPUTS''' (RCA, variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<br />
# '''DIGITAL INPUTS''' (Spdif) - To connect sources with Spdif (RCA) digital outputs.<br />
# '''DIGITAL OUTPUT''' (Spdif) - To connect to an external DAC or computer that has an Spdif digital input.<br />
# '''DIGITAL INPUTS''' (Toslink) - To connect sources with Toslink (optical) digital outputs.<br />
# '''DIGITAL OUTPUT''' (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.<br />
# '''HDMI INPUTS''' - To connect sources with HDMI 1.4 outputs.<br />
# '''HDMI OUTPUT''' - To connect to a display device with HDMI 1.4 inputs.<br />
# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.<br />
<br />
<br><br />
<br />
'''<sup>1</sup>''' Input 3 is a configurable input, which is factory set as a moving coil phono input for connection to turntables. This can be changed by a Linn dealer to a moving magnet phono input or a line-level input.<br><br />
'''<sup>2</sup>''' Analogue inputs (including front panel AUX IN), can be pass through an Analogue volume control to the Analogue out when Delay mode set to DIRECT on these inputs.<br />
<br />
<br><br><br />
<br />
===Akurate DSM/1 Differences===<br />
To see the differences between the Akurate DSM products check [[Akurate_DSM_variants | here]]<br><br><br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:Akurate_DSM_front.jpg|center|750px]]<br />
<br />
# '''MUTE BUTTON''' - Mutes/unmutes the audio<br />
# '''VOLUME ADJUST BUTTONS''' - Changes the volume up/down <br />
# '''SOURCE SELECT BUTTONS''' - Changes to the previous/next source<br />
# '''SLEEP BUTTON''' - Brings the unit in/out of sleep mode<br />
# '''FRONT PANEL DISPLAY'''<br />
# '''HEADPHONE OUTPUT''' - To connect to stereo headphones with a 3.5mm input<br />
# '''AUX SOURCE INPUT''' - To connect to a stereo audio source with a 3.5mm output <sup>2</sup><br />
# '''POWER SWITCH'''- Switches the power on/off<br />
<br />
<br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]<br />
<br />
<br />
== '''Exakt options''' ==<br />
Exakt usage with the Akurate DSM/1 can be found in [[Akurate_Exakt_System]]<br />
<br />
<br />
==Trouble shooting==<br />
Check [[ExaKt_Trouble_shooting | Exakt trouble shooting]]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Akurate_DSM&diff=13699
Akurate DSM
2017-06-01T12:34:12Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:AkurateKontrolFrontTop.jpg|right|350px]]<br />
<br />
== '''Getting Started''' == <br />
[http://www.linn.co.uk/go/akurate '''www.linn.co.uk/go/akurate''' ]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Akurate DSM<br />
<br />
* ''Date of Introduction:'' November 2011 - May 2014<br />
:Replaced by the [[Akurate DSM (Exakt Variant) | Akurate DSM/1]] in June 2014<br />
<br />
* ''Type:'' Integrated digital music player and preamplifier<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Akurate_DSM_Quickstart.pdf Quickstart Guide]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/REM_020 DSM Remote control manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]<br />
<br />
[[Space_Optimsation | Space Optimisation]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== HDMI Setup ==<br />
<br />
[[HDMI Setup]]<br />
<br />
[[DSM Audio Latencies Explained]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:Akurate_DSM_rear2.jpg|center|700px]]<br />
<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming).<br />
# '''ETHERNET''' - To connect to a network.<br />
# '''ANALOGUE INPUTS''' (XLR, line level) - To connect sources with balanced (XLR) outputs.<sup>2</sup><br />
# '''ANALOGUE INPUTS''' (RCA, phono/line level) - To connect a turntable or line level source with unbalanced (RCA) outputs<sup>1</sup><sup>2</sup>. (Default MC phono)<br />
# '''PHONO GROUND''' - To connect to a turntable grounding terminal. <br />
# '''ANALOGUE OUTPUTS''' (XLR,variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.<sup>2</sup><br />
# '''ANALOGUE OUTPUTS''' (RCA, variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<br />
# '''DIGITAL INPUTS''' (Spdif) - To connect sources with Spdif (RCA) digital outputs.<br />
# '''DIGITAL OUTPUT''' (Spdif) - To connect to an external DAC or computer that has an Spdif digital input.<br />
# '''DIGITAL INPUTS''' (Toslink) - To connect sources with Toslink (optical) digital outputs.<br />
# '''DIGITAL OUTPUT''' (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.<br />
# '''HDMI INPUTS''' - To connect sources with HDMI outputs.<br />
# '''HDMI OUTPUT''' - To connect to a display device with HDMI inputs.<br />
# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.<br />
<br />
<br><br />
'''<sup>1</sup>''' Input 3 is a configurable input, which is factory set as a moving coil phono input for connection to turntables. This can be changed by a Linn dealer to a moving magnet phono input or a line-level input.<br><br />
'''<sup>2</sup>''' Analogue inputs (including front panel AUX IN), can be pass through an Analogue volume control to the Analogue out when Delay mode set to DIRECT on these inputs.<br />
<br />
<br><br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:Akurate_DSM_front.jpg|center|750px]]<br />
<br />
# '''MUTE BUTTON''' - Mutes/unmutes the audio<br />
# '''VOLUME ADJUST BUTTONS''' - Changes the volume up/down <br />
# '''SOURCE SELECT BUTTONS''' - Changes to the previous/next source<br />
# '''SLEEP BUTTON''' - Brings the unit in/out of sleep mode<br />
# '''FRONT PANEL DISPLAY'''<br />
# '''HEADPHONE OUTPUT''' - To connect to stereo headphones with a 3.5mm input<br />
# '''AUX SOURCE INPUT''' - To connect to a stereo audio source with a 3.5mm output <sup>2</sup><br />
# '''POWER SWITCH'''- Switches the power on/off<br />
<br />
<br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Akurate_DSM_(4K_compatible)&diff=13698
Akurate DSM (4K compatible)
2017-06-01T12:34:04Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:AkurateKontrolFrontTop.jpg|right|350px]]<br />
<br />
== '''Getting Started''' == <br />
[http://www.linn.co.uk/go/akurate '''www.linn.co.uk/go/akurate''' ]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Akurate DSM/2<br />
<br />
* ''Software version:'' Akurate DSM Mk2<br />
<br />
* ''Date of Introduction:'' Sept 2016<br />
<br />
* ''Type:'' Integrated digital music player and preamplifier<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Akurate_DSM_Quickstart.pdf Quickstart Guide]<br />
<br />
[[Kazoo_Manual | Linn Kazoo User Manual]]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/REM_020 DSM Remote control manual]<br />
<br />
<!--[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual] --><br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[[Surround_Sound| Surround Sound]]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
<!---<br />
== HDMI Setup ==<br />
<br />
[[HDMI Setup]]<br />
<br />
[[DSM Audio Latencies Explained]]<br />
--><br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:Akurate DSM 1 rear.jpg|center|700px]]<br />
<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming).<br />
# '''ETHERNET''' - To connect to a network.<br />
# '''EXAKT LINK'''- To connect to Exakt compatible devices<br />
# '''ANALOGUE INPUTS''' (XLR, line level) - To connect sources with balanced (XLR) outputs.<sup>2</sup><br />
# '''ANALOGUE INPUTS''' (RCA, phono/line level) - To connect a turntable or line level source with unbalanced (RCA) outputs.<sup>1</sup> <sup>2</sup> (Default MC phono)<br />
# '''PHONO GROUND''' - To connect to a turntable grounding terminal. <br />
# '''ANALOGUE OUTPUTS''' (XLR,variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.<sup>2</sup><br />
# '''ANALOGUE OUTPUTS''' (RCA, variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<br />
# '''DIGITAL INPUTS''' (Spdif) - To connect sources with Spdif (RCA) digital outputs.<br />
# '''DIGITAL OUTPUT''' (Spdif) - To connect to an external DAC or computer that has an Spdif digital input.<br />
# '''DIGITAL INPUTS''' (Toslink) - To connect sources with Toslink (optical) digital outputs.<br />
# '''DIGITAL OUTPUT''' (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.<br />
# '''HDMI INPUTS''' - To connect sources with 1.4 & 2.0 HDMI outputs.<br />
# '''HDMI OUTPUT''' - To connect to a display device with 1.4 & 2.0 HDMI inputs.<br />
# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.<br />
<br />
<br><br />
<br />
'''<sup>1</sup>''' Input 3 is a configurable input, which is factory set as a moving coil phono input for connection to turntables. This can be changed by a Linn dealer to a moving magnet phono input or a line-level input.<br><br />
'''<sup>2</sup>''' Analogue inputs (including front panel AUX IN), can be pass through an Analogue volume control to the Analogue out when Delay mode set to DIRECT on these inputs.<br />
<br />
<br><br><br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:Akurate_DSM_front.jpg|center|750px]]<br />
<br />
# '''MUTE BUTTON''' - Mutes/unmutes the audio<br />
# '''VOLUME ADJUST BUTTONS''' - Changes the volume up/down <br />
# '''SOURCE SELECT BUTTONS''' - Changes to the previous/next source<br />
# '''SLEEP BUTTON''' - Brings the unit in/out of sleep mode<br />
# '''FRONT PANEL DISPLAY'''<br />
# '''HEADPHONE OUTPUT''' - To connect to stereo headphones with a 3.5mm input<br />
# '''AUX SOURCE INPUT''' - To connect to a stereo audio source with a 3.5mm output <sup>2</sup><br />
# '''POWER SWITCH'''- Switches the power on/off<br />
<br />
<br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]<br />
<br />
<br />
== '''Exakt options''' ==<br />
Exakt usage with the Akurate DSM/2 can be found in [[Akurate_Exakt_System]]<br />
<br />
<br />
==Trouble shooting==<br />
Check [[ExaKt_Trouble_shooting | Exakt trouble shooting]]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Akurate_DS_(2010_Variant)&diff=13697
Akurate DS (2010 Variant)
2017-06-01T12:33:49Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:AkurateDSMk2FrontTop.jpg|right|350px]]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Akurate DS/1<br />
<br />
* ''Date of Introduction:'' November 2010<br />
<br />
* ''Type:'' Digital music player<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Akurate_DS_Quickstart.pdf Quickstart Guide]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/DS_&_REM_019 Remote Control manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]<br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:AkurateDSMk2Back.png|center|700px]] <br><br />
<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.<br />
# '''ETHERNET''' - To connect to a network.<br />
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming)<br />
# '''RS232 PORTS''' - To connect to Linn devices that don't have ethernet.<br />
# '''DIGITAL OUTPUT''' - To connect to an external DAC or computer that has an Spdif input.<br />
# '''BALANCED AUDIO OUTPUTS''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.<br />
# '''UNBALANCED AUDIO OUTPUTS''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:AkurateDSMk2Front.png|center|700px]]<br />
<br />
# '''SOURCE SELECT BUTTON''' - Changes to the next source<br />
# '''SKIP TRACK BUTTONS''' - Skips to the previous/next track<br />
# '''STOP BUTTON''' - Stops playing the current track<br />
# '''PLAY BUTTON''' - Starts playing the current track<br />
# '''STANDBY BUTTON''' - Brings the product in/out of standby<br />
# '''POWER SWITCH''' - Switches the power on/off<br />
# '''FRONT PANEL DISPLAY'''<br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Akurate_DS&diff=13696
Akurate DS
2017-06-01T12:33:43Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:AkurateDS Silv 3Q cropped.jpg|right|360x170px]]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Akurate DS/0<br />
<br />
* ''Date of Introduction:'' November 2007<br />
:Replaced by the [[Akurate DS (2010 Variant) | Akurate DS/1]] in 2010<br />
<br />
* ''Type:'' Digital music player<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/DS_&_REM_019 Remote Control manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]<br />
<br />
[[Space_Optimsation | Space Optimisation]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:Akurate DS rear v2.jpg|center|700px]] <br><br />
<br />
# '''POWER SWITCH'''- Switches the power on/off<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.<br />
# '''ETHERNET''' - To connect to the network.<br />
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming).<br />
# '''RS232 PORTS''' - To connect to other Linn products without ethernet ports.<br />
# '''BALANCED AUDIO OUTPUTS''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.<br />
# '''UNBALANCED AUDIO OUTPUTS''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:Akurate DS front.jpg|center|700px]]<br />
<br />
# '''DISP BUTTON''' - Changes the front panel display mode.<br />
# '''FRONT PANEL DISPLAY'''<br />
# '''STANDBY BUTTON''' - Brings the product in/out of standby.<br />
# '''SKIP TRACK BUTTONS''' - Skips to the previous/next track<br />
# '''STOP/PLAY BUTTONS''' - Stops or Starts the current track<br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Akurate_DS_(Exakt_Variant)&diff=13695
Akurate DS (Exakt Variant)
2017-06-01T12:33:33Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:AkurateDSMk2FrontTop.jpg|right|350px]]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Akurate DS/1<br />
<br />
* ''Date of Introduction:'' April 2015<br />
<br />
* ''Type:'' Digital music player<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
** [Akurate_Exakt_System Exakt system]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Akurate_DS_Quickstart.pdf Quickstart Guide]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/DS_&_REM_019 Remote Control manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]<br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:AkurateDSMk3Back.jpg|center|700px]] <br><br />
<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.<br />
# '''ETHERNET''' - To connect to a network.<br />
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming)<br />
# '''RS232 PORTS''' - To connect to Linn devices that don't have ethernet.<br />
# '''DIGITAL OUTPUT''' - To connect to an external DAC or computer that has an Spdif input.<br />
# '''BALANCED AUDIO OUTPUTS''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.<br />
# '''UNBALANCED AUDIO OUTPUTS''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<br />
# '''EXAKT LINK'''- For connection of Exakt products (Exakt speakers/ExaktBox).<br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:AkurateDSMk2Front.png|center|700px]]<br />
<br />
# '''SOURCE SELECT BUTTON''' - Changes to the next source<br />
# '''SKIP TRACK BUTTONS''' - Skips to the previous/next track<br />
# '''STOP BUTTON''' - Stops playing the current track<br />
# '''PLAY BUTTON''' - Starts playing the current track<br />
# '''STANDBY BUTTON''' - Brings the product in/out of standby<br />
# '''POWER SWITCH''' - Switches the power on/off<br />
# '''FRONT PANEL DISPLAY'''<br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
<br />
== '''Exakt options''' ==<br />
Exakt usage with the Akurate DSM/1 can be found in [[Akurate_Exakt_System]]<br />
<br />
To enable Exakt options on the Exakt DS ensure that the '''internal volume control''' is turn '''ON''' in Konfig.<br />
<br />
==Trouble shooting==<br />
Check [[ExaKt_Trouble_shooting | Exakt trouble shooting]]<br />
<br />
<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Majik_DSM_(Exakt_Variant)&diff=13694
Majik DSM (Exakt Variant)
2017-06-01T12:00:26Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:MajikDSM Blk 3QLeft RGB web.jpg|right|435x143px]]<br />
<br />
== '''Getting Started''' == <br />
[http://www.linn.co.uk/go/majik '''www.linn.co.uk/go/majik''' ]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Majik DSM/2<br />
<br />
* ''Date of Introduction:'' April 2015<br />
<br />
* ''Type:'' Integrated digital music player, preamplifier and power amplifier<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [[Chakra_Power| Chakra Power]]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
** [http://docs.linn.co.uk/wiki/index.php/Aktiv Aktiv Operation]<br />
** [http://docs.linn.co.uk/wiki/index.php/Unity_Gain Source Unity Gain option]<br />
** [[Space_Optimsation|Exakt connections and Space Optimisation]]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Majik_DSM_Quickstart.pdf Quickstart Guide]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/REM_020 DSM Remote control manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]<br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[[Surround_Sound| Surround Sound]]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms & Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
<br />
[[Image:Majik_DSM_rear_Exakt.jpg |center|700px|Image:Majik_DSM_rear_Exakt.jpg ]] <br><br />
<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''HDMI INPUTS''' - To connect sources with HDMI outputs.<br />
# '''HDMI OUTPUT''' - To connect to a display device with HDMI inputs.<br />
# '''EARTH GROUND''' - To connect to a turntable grounding terminal, or an earthing terminal if no mains earth is available, or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.<br />
# '''DIGITAL INPUTS''' (Spdif) - To connect sources with Spdif (RCA) digital outputs.<br />
# '''DIGITAL OUTPUT''' (Spdif) - To connect to an external DAC or computer that has an Spdif digital input.<br />
# '''DIGITAL INPUTS''' (Toslink) - To connect sources with Toslink (optical) digital outputs.<br />
# '''DIGITAL OUTPUT''' (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.<br />
# '''ETHERNET''' - To connect to a network.<br />
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming)<br />
# '''ANALOGUE INPUTS''' (RCA, line level) - To connect sources with unbalanced (RCA) analogue outputs. Input 4 is a configurable input, which is factory set as a moving magnet phono input for connection to turntables. It can be changed by a Linn dealer to a line-level input or a moving coil phono input (moving coil is an optional upgrade).<br />
# '''ANALOGUE OUTPUTS/INPUTS''' (RCA, variable level) This is configurable in Konfig<br />
##To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs (Default)<br />
##or use in internal Majik DSM power amplifer for use with an Exakt Crossover. <br />
# '''ANALOGUE OUTPUTS''' (RCA, fixed level) - To connect to an analogue recording device with unbalanced (RCA) inputs.<br />
# '''SPEAKER OUTPUTS''' - To connect to loudspeakers<br />
# '''EXAKT LINK''' - To connect to Exakt compatible devices <br />
<br />
<br><br />
<br />
=== [[Exakt_link | '''EXAKT LINK connection''']]===<br />
Check [[Exakt_link | '''HERE''']] for information of Exakt link connection<br />
<br />
<br><br><br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:Majik DSM front.jpg|center|700px]]<br />
<br />
# '''MUTE BUTTON''' - Mutes/unmutes the audio<br />
# '''FRONT PANEL DISPLAY'''<br />
# '''SLEEP BUTTON''' - Brings the unit in/out of sleep mode<br />
# '''VOLUME ADJUST BUTTONS''' - Changes the volume up/down<br />
# '''HEADPHONE OUTPUT''' (3.5mm stereo) - To connect to headphones<br />
# '''AUXILIARY SOURCE INPUT''' (3.5mm stereo) - To connect to an analogue stereo audio source<br />
# '''SOURCE SELECT BUTTONS''' - Changes to the previous/next source<br />
# '''POWER SWITCH'''- Switches the power on/off.<br />
<br />
<br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/amplifier_protection Amplifier Protection]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/Integrated_Phono_Stage Configurable Phono Stage] <br />
<br />
<br />
==Trouble shooting==<br />
Check [[ExaKt_Trouble_shooting | Exakt trouble shooting]]<br />
<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Majik_DSM&diff=13693
Majik DSM
2017-06-01T12:00:20Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:MajikDSM Blk 3QLeft RGB web.jpg|right|435x143px]]<br />
<br />
== '''Getting Started''' == <br />
[http://www.linn.co.uk/go/majik '''www.linn.co.uk/go/majik''' ]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Majik DSM<br />
<br />
* ''Date of Introduction:'' April 2012<br />
<br />
* ''Type:'' Integrated digital music player, preamplifier and power amplifier<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [[Chakra_Power| Chakra Power]]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
** [http://docs.linn.co.uk/wiki/index.php/Aktiv Aktiv Operation]<br />
** [http://docs.linn.co.uk/wiki/index.php/Unity_Gain Source Unity Gain option]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Majik_DSM_Quickstart.pdf Quickstart Guide]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/REM_020 DSM Remote control manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]<br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms & Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
<br />
[[Image:Majik DSM rear.jpg|center|700px|Image:Majik_DS_rear.jpg]] <br><br />
<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''HDMI INPUTS''' - To connect sources with HDMI outputs.<br />
# '''HDMI OUTPUT''' - To connect to a display device with HDMI inputs.<br />
# '''EARTH GROUND''' - To connect to a turntable grounding terminal, or an earthing terminal if no mains earth is available, or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.<br />
# '''DIGITAL INPUTS''' (Spdif) - To connect sources with Spdif (RCA) digital outputs.<br />
# '''DIGITAL OUTPUT''' (Spdif) - To connect to an external DAC or computer that has an Spdif digital input.<br />
# '''DIGITAL INPUTS''' (Toslink) - To connect sources with Toslink (optical) digital outputs.<br />
# '''DIGITAL OUTPUT''' (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.<br />
# '''ETHERNET''' - To connect to a network.<br />
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming)<br />
# '''ANALOGUE INPUTS''' (RCA, line level) - To connect sources with unbalanced (RCA) analogue outputs. Input 4 is a configurable input, which is factory set as a moving magnet phono input for connection to turntables. It can be changed by a Linn dealer to a line-level input or a moving coil phono input (moving coil is an optional upgrade).<br />
# '''ANALOGUE OUTPUTS''' (RCA, variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<br />
# '''ANALOGUE OUTPUTS''' (RCA, fixed level) - To connect to an analogue recording device with unbalanced (RCA) inputs.<br />
# '''SPEAKER OUTPUTS''' - To connect to loudspeakers<br />
<br />
<br><br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:Majik DSM front.jpg|center|700px]]<br />
<br />
# '''MUTE BUTTON''' - Mutes/unmutes the audio<br />
# '''FRONT PANEL DISPLAY'''<br />
# '''SLEEP BUTTON''' - Brings the unit in/out of sleep mode<br />
# '''VOLUME ADJUST BUTTONS''' - Changes the volume up/down<br />
# '''HEADPHONE OUTPUT''' (3.5mm stereo) - To connect to headphones<br />
# '''AUXILIARY SOURCE INPUT''' (3.5mm stereo) - To connect to an analogue stereo audio source<br />
# '''SOURCE SELECT BUTTONS''' - Changes to the previous/next source<br />
# '''POWER SWITCH'''- Switches the power on/off.<br />
<br />
<br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/amplifier_protection Amplifier Protection]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/Integrated_Phono_Stage Configurable Phono Stage] <br />
<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Majik_DS-I&diff=13692
Majik DS-I
2017-06-01T12:00:13Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:Majik DS-I silver 3Qright RGB 72dpi.jpg|right|435x143px]]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Majik DS-I (renamed to Majik DSM)<br />
<br />
* ''Date of Introduction:'' October 2009 (renamed November 2011)<br />
<br />
* ''Type:'' Integrated digital music player, preamplifier and power amplifier<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [[Chakra_Power| Chakra Power]]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
** [http://docs.linn.co.uk/wiki/index.php/Aktiv Aktiv Operation]<br />
** [http://docs.linn.co.uk/wiki/index.php/Unity_Gain Source Unity Gain option]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://docs.linn.co.uk/wiki/images/d/dd/Linn_Majik_DS-I_Quickstart.pdf Quickstart Guide]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/DS_&_REM_019 Remote Control manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]<br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms & Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:Majik DS-I rear.jpg|center|731x222px|Image:Majik_DS-I_rear.jpg]] <br><br />
<br />
# '''POWER SWITCH'''- Switches the power on/off.<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''DIGITAL INPUTS''' (Spdif) - To connect sources with Spdif (RCA) digital outputs.<br />
# '''DIGITAL OUTPUT''' (Spdif) - To connect to an external DAC or computer that has an Spdif digital input.<br />
# '''DIGITAL INPUTS''' (Toslink) - To connect sources with Toslink (optical) digital outputs.<br />
# '''EARTH GROUND''' - To connect to a turntable grounding terminal, or an earthing terminal if no mains earth is available, or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.<br />
# '''DIGITAL OUTPUT''' (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.<br />
# '''SPEAKER OUTPUTS''' - To connect to loudspeakers<br />
# '''IR OUTPUTS''' - To connect to infrared flasher devices allowing control of other products that accept infra-red signals.<br />
# '''ETHERNET''' - To connect to a network.<br />
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming)<br />
# '''RS232 PORTS''' - For connection to Linn source products without ethernet ports.<br />
# '''ANALOGUE INPUTS''' (RCA, line level) - To connect sources with unbalanced (RCA) analogue outputs. Input 4 is a configurable input, which is factory set as a moving magnet phono input for connection to turntables. It can be changed by a Linn dealer to a line-level input or a moving coil phono input (moving coil is an optional upgrade).<br />
# '''ANALOGUE OUTPUTS''' (RCA, variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<br />
# '''ANALOGUE OUTPUTS''' (RCA, fixed level) - To connect to an analogue recording device with unbalanced (RCA) inputs.<br />
<br />
<br><br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:Majik DS-I front.jpg|center|747x245px]]<br />
<br />
# '''MUTE BUTTON''' - Mutes/unmutes the audio<br />
# '''FRONT PANEL DISPLAY'''<br />
# '''STANDBY BUTTON''' - Brings the unit in/out of standby<br />
# '''VOLUME ADJUST BUTTONS''' - Changes the volume up/down<br />
# '''HEADPHONE OUTPUT''' (3.5mm stereo) - To connect to headphones<br />
# '''AUXILIARY SOURCE INPUT''' (3.5mm stereo) - To connect to an analogue stereo audio source<br />
# '''SOURCE ADJUST BUTTONS''' - Changes to the previous/next source<br />
<br />
<br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/amplifier_protection Amplifier Protection]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/Integrated_Phono_Stage Configurable Phono Stage] <br />
<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Majik_DSM_(HDMI_2_Variant)&diff=13691
Majik DSM (HDMI 2 Variant)
2017-06-01T12:00:06Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:MajikDSM Blk 3QLeft RGB web.jpg|right|435x143px]]<br />
<br />
== '''Getting Started''' == <br />
[http://www.linn.co.uk/go/majik '''www.linn.co.uk/go/majik''' ]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Majik DSM/3<br />
<br />
* ''Date of Introduction:'' Sept 2016<br />
<br />
* ''Type:'' Integrated digital music player, preamplifier and power amplifier<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [[Chakra_Power| Chakra Power]]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
** [http://docs.linn.co.uk/wiki/index.php/Aktiv Aktiv Operation]<br />
** [http://docs.linn.co.uk/wiki/index.php/Unity_Gain Source Unity Gain option]<br />
** [[Space_Optimsation|Exakt connections and Space Optimisation]]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Majik_DSM_Quickstart.pdf Quickstart Guide]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/REM_020 DSM Remote control manual]<br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[[Surround_Sound| Surround Sound]]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms & Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
<br />
[[Image:Majik_DSM_rear_Exakt.jpg |center|700px|Image:Majik_DSM_rear_Exakt.jpg ]] <br><br />
<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''HDMI INPUTS''' - To connect sources with 1.4 & 2.0 HDMI outputs. .<br />
# '''HDMI OUTPUT''' - To connect to a display device with 1.4 & 2.0 HDMI inputs.<br />
# '''EARTH GROUND''' - To connect to a turntable grounding terminal, or an earthing terminal if no mains earth is available, or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.<br />
# '''DIGITAL INPUTS''' (Spdif) - To connect sources with Spdif (RCA) digital outputs.<br />
# '''DIGITAL OUTPUT''' (Spdif) - To connect to an external DAC or computer that has an Spdif digital input.<br />
# '''DIGITAL INPUTS''' (Toslink) - To connect sources with Toslink (optical) digital outputs.<br />
# '''DIGITAL OUTPUT''' (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.<br />
# '''ETHERNET''' - To connect to a network.<br />
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming)<br />
# '''ANALOGUE INPUTS''' (RCA, line level) - To connect sources with unbalanced (RCA) analogue outputs. Input 4 is a configurable input, which is factory set as a moving magnet phono input for connection to turntables. It can be changed by a Linn dealer to a line-level input or a moving coil phono input (moving coil is an optional upgrade).<br />
# '''ANALOGUE OUTPUTS/INPUTS''' (RCA, variable level) This is configurable in Konfig<br />
##To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs (Default)<br />
##or use in internal Majik DSM power amplifer for use with an Exakt Crossover. <br />
# '''ANALOGUE OUTPUTS''' (RCA, fixed level) - To connect to an analogue recording device with unbalanced (RCA) inputs.<br />
# '''SPEAKER OUTPUTS''' - To connect to loudspeakers<br />
# '''EXAKT LINK''' - To connect to Exakt compatible devices <br />
<br />
<br><br />
<br />
=== [[Exakt_link | '''EXAKT LINK connection''']]===<br />
Check [[Exakt_link | '''HERE''']] for information of Exakt link connection<br />
<br />
<br><br><br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:Majik DSM front.jpg|center|700px]]<br />
<br />
# '''MUTE BUTTON''' - Mutes/unmutes the audio<br />
# '''FRONT PANEL DISPLAY'''<br />
# '''SLEEP BUTTON''' - Brings the unit in/out of sleep mode<br />
# '''VOLUME ADJUST BUTTONS''' - Changes the volume up/down<br />
# '''HEADPHONE OUTPUT''' (3.5mm stereo) - To connect to headphones<br />
# '''AUXILIARY SOURCE INPUT''' (3.5mm stereo) - To connect to an analogue stereo audio source<br />
# '''SOURCE SELECT BUTTONS''' - Changes to the previous/next source<br />
# '''POWER SWITCH'''- Switches the power on/off.<br />
<br />
<br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/amplifier_protection Amplifier Protection]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/Integrated_Phono_Stage Configurable Phono Stage] <br />
<br />
<br />
==Trouble shooting==<br />
Check [[ExaKt_Trouble_shooting | Exakt trouble shooting]]<br />
<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Majik_DS-I&diff=13690
Majik DS-I
2017-06-01T11:59:56Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:Majik DS-I silver 3Qright RGB 72dpi.jpg|right|435x143px]]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Majik DS-I (renamed to Majik DSM)<br />
<br />
* ''Date of Introduction:'' October 2009 (renamed November 2011)<br />
<br />
* ''Type:'' Integrated digital music player, preamplifier and power amplifier<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [[Chakra_Power| Chakra Power]]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
** [http://docs.linn.co.uk/wiki/index.php/Aktiv Aktiv Operation]<br />
** [http://docs.linn.co.uk/wiki/index.php/Unity_Gain Source Unity Gain option]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://docs.linn.co.uk/wiki/images/d/dd/Linn_Majik_DS-I_Quickstart.pdf Quickstart Guide]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/DS_&_REM_019 Remote Control manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]<br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms & Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:Majik DS-I rear.jpg|center|731x222px|Image:Majik_DS-I_rear.jpg]] <br><br />
<br />
# '''POWER SWITCH'''- Switches the power on/off.<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''DIGITAL INPUTS''' (Spdif) - To connect sources with Spdif (RCA) digital outputs.<br />
# '''DIGITAL OUTPUT''' (Spdif) - To connect to an external DAC or computer that has an Spdif digital input.<br />
# '''DIGITAL INPUTS''' (Toslink) - To connect sources with Toslink (optical) digital outputs.<br />
# '''EARTH GROUND''' - To connect to a turntable grounding terminal, or an earthing terminal if no mains earth is available, or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.<br />
# '''DIGITAL OUTPUT''' (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.<br />
# '''SPEAKER OUTPUTS''' - To connect to loudspeakers<br />
# '''IR OUTPUTS''' - To connect to infrared flasher devices allowing control of other products that accept infra-red signals.<br />
# '''ETHERNET''' - To connect to a network.<br />
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming)<br />
# '''RS232 PORTS''' - For connection to Linn source products without ethernet ports.<br />
# '''ANALOGUE INPUTS''' (RCA, line level) - To connect sources with unbalanced (RCA) analogue outputs. Input 4 is a configurable input, which is factory set as a moving magnet phono input for connection to turntables. It can be changed by a Linn dealer to a line-level input or a moving coil phono input (moving coil is an optional upgrade).<br />
# '''ANALOGUE OUTPUTS''' (RCA, variable level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<br />
# '''ANALOGUE OUTPUTS''' (RCA, fixed level) - To connect to an analogue recording device with unbalanced (RCA) inputs.<br />
<br />
<br><br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:Majik DS-I front.jpg|center|747x245px]]<br />
<br />
# '''MUTE BUTTON''' - Mutes/unmutes the audio<br />
# '''FRONT PANEL DISPLAY'''<br />
# '''STANDBY BUTTON''' - Brings the unit in/out of standby<br />
# '''VOLUME ADJUST BUTTONS''' - Changes the volume up/down<br />
# '''HEADPHONE OUTPUT''' (3.5mm stereo) - To connect to headphones<br />
# '''AUXILIARY SOURCE INPUT''' (3.5mm stereo) - To connect to an analogue stereo audio source<br />
# '''SOURCE ADJUST BUTTONS''' - Changes to the previous/next source<br />
<br />
<br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/amplifier_protection Amplifier Protection]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/Integrated_Phono_Stage Configurable Phono Stage] <br />
<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Majik_DS&diff=13689
Majik DS
2017-06-01T11:59:50Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:MajikDS Silv 3QRight RGB 72DPI.jpg|right|308x166px]]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Majik DS (/1)<br />
<br />
* ''Date of Introduction:'' June 2008<br />
:* Upgraded to Majik DS/1 in April 2012 with cosmentic changes<br />
:: summary of changes: New feet, power switch moved to front lower corner and black facia on black products.<br />
<br />
* ''Type:'' Digital music player<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Majik_DS_Owners_Manual.pdf Owner's Manual]<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Majik_DS_Product_Information.pdf Product Information Sheet]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/DS_&_REM_019 Remote Control manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]<br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:Majik DS rear.jpg|center|731x222px|Image:Majik_DS_rear.jpg]] <br><br />
<br />
# '''POWER SWITCH'''- To switch the power on/off.<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.<br />
# '''ETHERNET''' - To connect to a network.<br />
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming).<br />
# '''RS232 PORTS''' - To connect to other Linn devices that don't have ethernet.<br />
# '''SPDIF OUT''' - To connect to an external DAC or computer that has an Spdif input.<br />
# '''TOSLINK OUT''' - To connect to an external DAC or computer that has a TOSLINK input.<br />
# '''ANALOGUE AUDIO OUTPUTS''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<br />
<br />
<br><br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:MajikDSFront.png|center|700px]]<br />
<br />
<br />
# '''DISP BUTTON''' - Changes the front panel display mode.<br />
# '''SKIP BUTTONS''' - Skips to the previous/next track<br />
# '''STOP BUTTON''' - Stops playing the current track<br />
# '''PLAY BUTTON''' - Starts playing the current track<br />
# '''STANDBY BUTTON''' - Brings the product in/out of standby.<br />
# '''FRONT PANEL DISPLAY'''<br />
<br />
<br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Majik_DS_(Exakt_Variant)&diff=13688
Majik DS (Exakt Variant)
2017-06-01T11:59:43Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:MajikDS Silv 3QRight RGB 72DPI.jpg|right|308x166px]]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Majik DS /2<br />
<br />
* ''Date of Introduction:''April 2015<br />
:* Upgraded to Majik DS/2 with Exakt-link functionality<br />
<br />
<br />
* ''Type:'' Digital music player with Exakt capability<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Majik_DS_Owners_Manual.pdf Owner's Manual]<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Majik_DS_Product_Information.pdf Product Information Sheet]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/DS_&_REM_019 Remote Control manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]<br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:Majik DS2 Rear.jpg|center|769x249px|Image:Majik DS2 Rear.jpg]] <br><br />
<br />
<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.<br />
# '''RS232 PORTS''' - To connect to other Linn devices that don't have ethernet.<br />
# '''ETHERNET''' - To connect to a network.<br />
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming).<br />
# '''EXAKT LINK'''- For connection of Exakt products (Exakt speakers/ExaktBox).<br />
# '''SPDIF OUT''' - To connect to an external DAC or computer that has an Spdif input.<br />
# '''TOSLINK OUT''' - To connect to an external DAC or computer that has a TOSLINK input.<br />
# '''ANALOGUE AUDIO OUTPUTS''' - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<br />
<br />
<br><br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:Majik DS2 Front buttons.jpg|center|710px]]<br />
<br />
# '''DISP BUTTON''' - Changes the front panel display mode.<br />
# '''SKIP BUTTONS''' - Skips to the previous/next track<br />
# '''STOP BUTTON''' - Stops playing the current track<br />
# '''PLAY BUTTON''' - Starts playing the current track<br />
# '''POWER SWITCH'''- To switch the power on/off.<br />
# '''STANDBY BUTTON''' - Brings the product in/out of standby.<br />
# '''FRONT PANEL DISPLAY'''<br />
<br />
<br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
<br />
<br />
==Trouble shooting==<br />
Check [[ExaKt_Trouble_shooting | Exakt trouble shooting]]<br />
<br />
<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Kiko_DSM_information&diff=13687
Kiko DSM information
2017-06-01T11:59:04Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:KikoFront-1-0.jpg|right|350px]]<br />
== '''Getting Started''' == <br />
[http://www.linn.co.uk/go/kiko '''www.linn.co.uk/go/kiko''' ]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Kiko DSM<br />
<br />
* ''Date of Introduction:'' July 2012<br />
<br />
* ''Type:'' Integrated digital music player, pre-amplifier and power amplifier<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/REM_020 DSM Remote control manual]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''HDMI Setup''' ==<br />
<br />
[[HDMI Setup]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:Kiko_DSM_rear_1-1.jpg|center|700px]]<br />
<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming).<br />
# '''ETHERNET''' - To connect to a network.<br />
# '''HDMI OUTPUT''' - To connect to a display device with HDMI inputs.<br />
# '''HDMI INPUTS''' - To connect sources with HDMI outputs.<br />
# '''DIGITAL INPUT''' (Toslink) - To connect sources with Toslink (optical) digital outputs.<br />
# '''DIGITAL INPUT''' (Spdif) - To connect sources with Spdif (RCA) digital outputs.<br />
# '''ANALOGUE INPUT''' (line level) - To connect a turntable or line level source with unbalanced (RCA) outputs.<br />
# '''SPEAKER OUTPUTS''' - To connect to loudspeakers<br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:Kiko_DSM_Front_1-1.jpg|center|750px]]<br />
<br />
# '''HEADPHONE OUTPUT''' - To connect to stereo headphones with a 3.5mm input<br />
# '''AUX SOURCE INPUT''' - To connect to a stereo audio source with a 3.5mm output<br />
# '''IR SENSOR''' - Recieves IR commands<br />
# '''STANDBY LED'''<br />
# '''FRONT PANEL DISPLAY'''<br />
# '''POWER SWITCH'''- Switches the power on/off<br />
<br />
<br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Sekrit_DSM&diff=13686
Sekrit DSM
2017-06-01T11:58:57Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:SekritDsm.png|right|350px]]<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Sekrit DSM<br />
<br />
* ''Date of Introduction:'' December 2012<br />
<br />
* ''Type:'' Integrated digital music player, pre-amplifier, and power amplifier<br />
<br />
* ''Dimensions:'' 345 mm (width) x 44 mm (height) x 196.5mm (depth) <br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [http://docs.linn.co.uk/wiki/index.php/Unity_Gain Source Unity Gain option]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/REM_020 DSM Remote control manual]<br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Audio Latency''' ==<br />
<br />
[[DSM Audio Latencies Explained]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:SekritDsmRear_2.jpg|center|700px]]<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''FALLBACK'''- To put the device into Fallback mode (used when reprogramming).<br />
# '''ETHERNET''' - To connect to a network.<br />
# '''HDMI OUTPUT''' - To connect to a display device with HDMI inputs.<br />
# '''HDMI INPUTS''' - To connect sources with HDMI outputs.<br />
# '''ANALOGUE OUTPUT''' (RCA, variable/fixed level) - To connect to subwoofer or external power amplifier (or pre amplifier when internal volume control is disabled, this will also disable the internal Power amplifier/speaker outputs) with unbalanced (RCA) analogue inputs.<br />
# '''IR OUTPUTS''' - To connect to infrared flasher devices allowing control of other products that accept infra-red signals.<br />
# '''DIGITAL INPUT''' (Toslink) - To connect sources with Toslink (optical) digital outputs.<br />
# '''DIGITAL INPUT''' (Spdif) - To connect sources with Spdif (RCA) digital outputs.<br />
# '''ANALOGUE INPUT''' (line level) - To connect a turntable or line level source with unbalanced (RCA) outputs.<br />
# '''SPEAKER OUTPUTS''' - To connect to loudspeakers, Neutrik 4 pole connector<br />
# '''RC5 ACCESSORY''' - To connect [[ DS_Control_Options#Knekt_BASIK3_RCU | Linn BASIK3 or BASIK3-IR]] Room Control units, (setup for RoomAmp2 connection (jumper link removed)). Standard IR receivers cannot be used in this socket. This requires a Knekt-CAT-5 cable to connect to the Linn DSM<br />
<br><br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:SekritDsmFront_3.jpg|center|700px]]<br />
<br />
# '''IR SENSOR''' - Recieves IR commands<br />
# '''DIAGNOSTIC LEDS''' - See table below for functionality<br />
# '''FALLBACK (F-BACK)''' - To put the device into Fallback mode (used when reprogramming).<br />
# '''POWER SWITCH'''- Switches the power on/off<br />
# '''IR REPEATER CLAMP'''- IR Repeater Clamp fixing screws<br />
<br><br />
<br />
'''DIAGNOSTIC LED FUNCTIONS'''<br />
<br />
{| border="1" cellspacing="0" cellpadding="0" width="100%" align="center"<br />
|-<br />
| bgcolor="#cccccc" align="center" | <br />
'''''Text'''''<br />
<br />
| bgcolor="#cccccc" width="21%" align="center" | <br />
'''''ON'''''<br />
<br />
'''''indicates'''''<br />
<br />
| bgcolor="#cccccc" width="21%" align="center" | <br />
'''''OFF'''''<br />
<br />
'''''indicates'''''<br />
<br />
| bgcolor="#cccccc" width="21%" align="center" | <br />
'''''Slow''''' '''''Flash / Blink'''''<br />
<br />
| bgcolor="#cccccc" width="15%" align="center" | <br />
'''''Fast''''' '''''Flash''''' <br><br />
|-<br />
| align="center" | '''IR'''<br />
| align="center" | Pulse on IR command received<br />
| align="center" | Reserved for future use<br />
| align="center" | Reserved for future use<br />
| align="center" | n/a<br />
|-<br />
| align="center" | '''AMP'''<br />
| align="center" | Internal amplifier enabled<br />
| align="center" | Internal amplifier disabled<br />
| align="center" | Internal amplifier fault<br />
| align="center" | n/a<br />
|-<br />
| align="center" | '''AUDIO'''<br />
| align="center" | Valid audio (digital inputs only)<br />
| align="center" | n/a<br />
| align="center" | Invalid audio (digital inputs only)<br />
| align="center" | n/a<br />
|-<br />
| align="center" | '''IP'''<br />
| align="center" | DHCP IP address obtained<br />
| align="center" | Default IP address obtained<br />
| align="center" | n/a<br />
| align="center" | n/a<br />
|-<br />
| align="center" | '''NET'''<br />
| align="center" | Ethernet link established<br />
| align="center" | no link established<br />
| align="center" | n/a<br />
| align="center" | n/a<br />
|-<br />
| align="center" | '''STBY'''<br />
| align="center" | Device in standby<br />
| align="center" | Device active<br />
| align="center" | Searching for IP address (boot)<br />
| align="center" | Fallback (reprogramme)<br />
|}<br />
<br />
<br />
<br><br />
<br />
== '''Speaker Wiring''' ==<br />
The Sekrit DSM has 4 DAC channels and 4 Power Amplifiers. These amplifiers can be configured in single ended mode or bridged mode. All speaker outputs (and Analogue Output) share the same common Volume control.<br />
<br />
Connections to the speakers are made via Neutrik Speakon connectors, NL4FX. <br />
[http://www.neutrik.com/zoolu-website/media/download/17333/Assembly+Instruction+-+speakON+SPX+Series Neutrik Speakon Assembly Instructions]<br />
<br />
The single ended mode is best suited to bi-amping a pair of passive speakers or for driving multiple pairs of loadspeakers. Bridged mode is best suited to driving a single pair of loudspeakers. <br />
<br />
The wiring details are shown below:<br />
<br><br><br />
[[Image:SekritDsmWiring.jpg|center|700px]]<br />
<br><br />
* 33W/channel in single-ended mode<br />
* 50W/channel in bridged mode<br />
<br><br />
<br />
== Differences between Sneaky DSM and Sekrit DSM ==<br />
Check [[FAQs#Differences_between_the_Sekrit_DSM_and_Sneaky_DSM|FAQ's]]<br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/amplifier_protection Amplifier Protection]<br />
<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Sekrit_DS-I&diff=13685
Sekrit DS-I
2017-06-01T11:58:50Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:Sekrit DS-I front rightl RGB 72DPI.jpg|right|293x175px]]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Sekrit DS-I<br />
<br />
* ''Date of Introduction:'' October 2009<br />
* ''Discontinued: 2013'' - replaced by the [[Sekrit_DSM|Sekrit DSM]]<br />
<br />
<br />
* ''Type:'' Digital music player<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [http://docs.linn.co.uk/wiki/index.php/Dynamik Dynamik Power Supply]<br />
** [http://docs.linn.co.uk/wiki/index.php/Unity_Gain Source Unity Gain option]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Sekrit_DS_I_Product_Information.pdf Product Information]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/DS_&_REM_019 Remote Control manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]<br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:Sekrit DSI rear.jpg|center|600x328px|Image:Sekrit_DSI_rear.jpg]] <br><br />
<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.<br />
# '''SPEAKER OUTPUTS''' - To connect to loudspeakers.<br />
# '''ANALOGUE OUTPUTS''' (RCA, variable/fixed level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<br />
# '''ANALOGUE INPUTS''' (RCA, line level) - To connect sources with unbalanced (RCA) analogue outputs.<br />
# '''RC5 ACCESSORY''' - To connect to a Linn BASIK3 or BASIK3-IR Knekt control device, (setup for RoomAmp2 connection (jumper link removed)). This requires a Knekt-CAT-5 cable to connect to the Linn DS <br />
# '''IR OUTPUTS''' - To connect to infrared flasher devices allowing control of other products that accept infra-red signals.<br />
# '''RS232 PORTS''' - To connect to other Linn devices that don't have ethernet.<br />
# '''ETHERNET''' - To connect to a network.<br />
# '''DIGITAL INPUT''' (Spdif) - To connect sources with Spdif (RCA) digital outputs.<br />
# '''DIGITAL INPUT''' (Toslink) - To connect sources with Toslink (optical) digital outputs.<br />
<br />
<BR><br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:Sekrit DSI front.jpg|center|600px|Image:Sekrit_DSI_front.jpg]]<br />
<br />
<br><br />
<br />
# '''POWER SWITCH''' - Switches the power on/off<br />
# '''FALLBACK BUTTON''' - To put the device into Fallback mode (used when reprogramming)<br />
<br />
<br>'''LED FUNCTIONS'''<br />
<br />
{| border="1" cellspacing="0" cellpadding="0" width="100%" align="center"<br />
|-<br />
| bgcolor="#cccccc" align="center" | <br />
'''''Text'''''<br />
<br />
| bgcolor="#cccccc" width="21%" align="center" | <br />
'''''ON'''''<br />
<br />
'''''indicates'''''<br />
<br />
| bgcolor="#cccccc" width="21%" align="center" | <br />
'''''OFF'''''<br />
<br />
'''''indicates'''''<br />
<br />
| bgcolor="#cccccc" width="21%" align="center" | <br />
'''''Slow''''' '''''Flash / Blink'''''<br />
<br />
| bgcolor="#cccccc" width="15%" align="center" | <br />
'''''Fast''''' '''''Flash''''' <br><br />
<br />
|-<br />
| align="center" | '''STANDBY'''<br />
| align="center" | Device in standby<br />
| align="center" | Device active<br />
| align="center" | Searching for IP address (boot)<br />
| align="center" | Fallback (reprogramme)<br />
|-<br />
| align="center" | '''LINK'''<br />
| align="center" | Ethernet link established<br />
| align="center" | no link established<br />
| align="center" | n/a<br />
| align="center" | n/a<br />
|-<br />
| align="center" | '''DHCP'''<br />
| align="center" | DHCP IP address obtained<br />
| align="center" | Default IP address obtained<br />
| align="center" | n/a<br />
| align="center" | n/a<br />
|-<br />
| align="center" | '''AUDIO'''<br />
| align="center" | Valid audio (digital inputs only)<br />
| align="center" | n/a<br />
| align="center" | Invalid audio (digital inputs only)<br />
| align="center" | n/a<br />
|-<br />
| align="center" | '''POWER AMP'''<br />
| align="center" | Internal amplifier enabled<br />
| align="center" | Internal amplifier disabled<br />
| align="center" | Internal amplifier fault<br />
| align="center" | n/a<br />
|-<br />
| align="center" | '''RCU'''<br />
| align="center" | Reserved for future use<br />
| align="center" | Reserved for future use<br />
| align="center" | Reserved for future use<br />
| align="center" | n/a<br />
|-<br />
| align="center" | '''SEARCH'''<br />
| align="center" | n/a<br />
| align="center" | n/a<br />
| align="center" | Find me<br />
| align="center" | n/a<br />
|-<br />
| align="center" | '''TRANSMIT'''<br />
| align="center" | Reserved for future use<br />
| align="center" | n/a<br />
| align="center" | n/a<br />
| align="center" | n/a<br />
|}<br />
<br />
<br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/amplifier_protection Amplifier Protection]<br />
<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Sneaky_DSM&diff=13684
Sneaky DSM
2017-06-01T11:58:40Z
<p>Simonc: /* Manuals */</p>
<hr />
<div>[[Image:SneakyDsmMain.png|right|550px]]<br />
== '''Getting Started''' == <br />
[http://www.linn.co.uk/go/sneaky '''www.linn.co.uk/go/sneaky''' ]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Sneaky DSM<br />
<br />
* ''Date of Introduction:'' February 2013<br />
<br />
* ''Type:'' Integrated digital music player, pre-amplifier, and power amplifier<br />
<br />
* ''Dimensions:'' 350 mm (width) x 54.5 mm (height) x 215 mm (depth) <br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
** [http://docs.linn.co.uk/wiki/index.php/Unity_Gain Source Unity Gain option]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/REM_020 DSM Remote control manual]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Audio Latency''' ==<br />
<br />
[[DSM Audio Latencies Explained]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:SneakyDsmRear.png|center|700px]]<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''FALLBACK'''- To put the device into Fallback mode (used when reprogramming).<br />
# '''ETHERNET''' - To connect to a network.<br />
# '''HDMI OUTPUT''' - To connect to a display device with HDMI inputs.<br />
# '''HDMI INPUTS (3)''' - To connect sources with HDMI outputs.<br />
# '''ANALOGUE OUTPUT''' (RCA, variable/fixed level) - To connect to subwoofer or external power amplifier (or pre amplifier when internal volume control is disabled, this will also disable the internal Power amplifier/speaker outputs) with unbalanced (RCA) analogue inputs.<br />
# '''DIGITAL INPUT''' (Toslink) - To connect sources with Toslink (optical) digital outputs.<br />
# '''DIGITAL INPUT''' (Spdif) - To connect sources with Spdif (RCA) digital outputs.<br />
# '''ANALOGUE INPUT''' (line level) - To connect a turntable or line level source with unbalanced (RCA) outputs.<br />
# '''SPEAKER OUTPUTS''' - To connect to loudspeakers, Neutrik 4 pole connector<br />
<br><br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:SneakyDsmFront.png|center|700px]]<br />
<br />
# '''Front Slot''' - contains the IR sensor and the Standby LED<br />
<br><br />
<br />
'''STANDBY LED FUNCTIONS'''<br />
<br />
{| border="1" cellspacing="0" cellpadding="0" width="100%" align="center"<br />
|-<br />
<br />
| bgcolor="#cccccc" width="21%" align="center" | <br />
'''''DIM/OFF'''''<br />
<br />
'''''indicates'''''<br />
<br />
| bgcolor="#cccccc" width="21%" align="center" | <br />
'''''BRIGHT/ON'''''<br />
<br />
'''''indicates'''''<br />
<br />
| bgcolor="#cccccc" width="21%" align="center" | <br />
'''''Slow''''' '''''Flash'''''<br />
<br />
| bgcolor="#cccccc" width="15%" align="center" | <br />
'''''Fast''''' '''''Flash''''' <br><br />
|-<br />
|-<br />
| align="center" | Device in standby<br />
| align="center" | Device active (will also pulse on IR command received)<br />
| align="center" | Searching for IP address (boot)<br />
| align="center" | Fallback (reprogramme)<br />
|}<br />
<br />
<br><br />
<br />
== '''Speaker Wiring''' ==<br />
The Sneaky DSM has 4 DAC channels and 4 Power Amplifiers. These amplifiers can be configured in stereo mode or bi-amped mode (via Konfig). All speaker outputs (and Analogue Output) share the same common Volume control.<br />
<br />
Connections to the speakers are made via Neutrik Speakon connectors, NL4FX. <br />
[http://www.neutrik.com/zoolu-website/media/download/146/Assembly+Instruction+-+speakON+System Neutrik Speakon Assembly Instructions]<br />
<br />
The '''stereo mode''' is best suited to connecting to passive one-way speakers. Power output is 33W/channel (2 x 33).<br />
[[Image:NeutrikConnector.png|left|100px]]<br />
1+ -> Speaker +<br />
1- -> Speaker -<br />
2+ -> Not Connected<br />
2- -> Not Connected<br />
<br><br />
The '''bi-amped mode''' is best suited to connecting to passive two-way speakers. Power output is 33W/channel (4 x 33).<br />
[[Image:NeutrikConnector.png|left|100px]]<br />
1+ -> Speaker 1+<br />
1- -> Speaker 1-<br />
2+ -> Speaker 2+<br />
2- -> Speaker 2-<br />
<br><br />
<br />
== Differences between Sneaky DSM and Sekrit DSM ==<br />
Check [[FAQs#Differences_between_the_Sekrit_DSM_and_Sneaky_DSM|FAQ's]]<br />
<br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/amplifier_protection Amplifier Protection]<br />
<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=Sneaky_Music_DS&diff=13683
Sneaky Music DS
2017-06-01T11:58:11Z
<p>Simonc: </p>
<hr />
<div>[[Image:SneakyMusicDS Silv 3QRight RGB 72DPI.jpg|right|404x174px]]<br />
<br />
== '''Product info''' ==<br />
<br />
* ''Product Name:'' Sneaky Music DS<br />
<br />
* ''Date of Introduction:'' March 2008<br />
<br />
* ''Type:'' Digital music player<br />
<br />
* ''Features'' <br />
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]<br />
<br />
== '''Support''' ==<br />
<br />
[http://www.linn.co.uk/support Linn Support Site]<br />
<br />
== '''Latest software''' ==<br />
<br />
[http://www.linn.co.uk/ds_software Latest software releases]<br />
<br />
[http://oss.linn.co.uk/trac Open source software]<br />
<br />
== '''Manuals''' ==<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Sneaky_Music_DS_Product_Information.pdf Product Information Sheet]<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Sneaky_Music_DS_Owners_Manual.pdf Owners Manual]<br />
<br />
[http://small.linncdn.com/product-catalogue/documents/Linn_Sneaky_Music_DS_Setup_Manual.pdf Setup Manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual Kinsky Desktop manual]<br />
<br />
[http://docs.linn.co.uk/wiki/index.php/DS_&_REM_019 Remote Control manual]<br />
<br />
[http://oss.linn.co.uk/trac/wiki/KinskyJukeboxManual Kinsky Jukebox manual]<br />
<br />
[[Space_Optimsation | Space Optimisation+]]<br />
<br />
[[Advanced_Space_optimisation | Space Optimisation (Advanced)]]<br />
<br />
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]<br />
<br />
[http://www.linn.co.uk/warranty Warranty Terms and Conditions]<br />
<br />
[[ThirdPartySoftwareCopyright| Third Party Software Copyright]]<br />
<br />
== '''Network Setup''' ==<br />
<br />
[[DS Budget System| DS Budget System Setup]]<br />
<br />
[[DS Entry Level System| DS Entry Level System Setup]]<br />
<br />
[[DS High End System| DS High End System Setup]]<br />
<br />
== '''Back Panel Connections''' ==<br />
<br />
[[Image:Sneaky DS rear.jpg|center|720px]]<br />
<br />
# '''MAINS INPUT''' - To connect to the mains electricity supply.<br />
# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.<br />
# '''SPEAKER OUTPUTS''' - To connect to loudspeakers<br />
# '''ANALOGUE OUTPUTS''' (RCA, variable/fixed level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.<br />
# '''DIGITAL OUT''' (TOSLINK) - To connect to an external DAC or computer that has a Toslink (optical) digital input.<br />
# '''DIGITAL OUT''' (SPDIF) - To connect to an external DAC or computer that has an Spdif digital input.<br />
# '''RCU ACCESSORY''' - To connect to a [[ DS_Control_Options#Knekt_BASIK3_RCU | Linn BASIK3 or BASIK3-IR]] Knekt control device, (setup for RoomAmp2 connection (jumper link removed)). This requires a Knekt-CAT-5 cable to connect to the Linn DS<br />
# '''RS232 PORTS''' - To connect to other Linn devices that don't have ethernet.<br />
# '''FALLBACK''' - To put the device into Fallback mode (used when reprogramming)<br />
# '''ETHERNET''' - To connect to a network.<br />
<br />
<br><br />
<br />
== '''Front Panel Connections''' ==<br />
<br />
[[Image:SneakyMusicDS Silv Front RGB 72DPI.jpg|center|747px]]<br />
<br />
Product status is indicated by the LED behind the Linn badge, default settings are shown below. <br><br />
<br />
'''LED OFF''' - no power <br>'''LED ON DIM''' - product in standby <br>'''LED ON BRIGHT''' - product is active <br>'''LED SLOW FLASH''' - searching for IP address (boot) <br>'''LED FAST FLASH''' - fallback (re-programme)<br />
<br />
Note: LED may be turned off using Linn Konfig. <br><br><br />
<br />
== '''Installation''' ==<br />
<br />
Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_unpacking Unpacking Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/product_positioning Positioning Information]<br />
<br />
* [http://docs.linn.co.uk/wiki/index.php/amplifier_protection Amplifier Protection]<br />
<br />
For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages or the [http://Forums.linn.co.uk Linn Forum.]</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=ThirdPartySoftwareCopyright&diff=13682
ThirdPartySoftwareCopyright
2017-06-01T10:24:31Z
<p>Simonc: Created page with "= Third Party Software Copyright Information = Linn DS models use the following Open Source software: == FreeRTOS == Any FreeRTOS source code, whether modified or in it's origi…"</p>
<hr />
<div>= Third Party Software Copyright Information =<br />
<br />
Linn DS models use the following Open Source software:<br />
<br />
== FreeRTOS ==<br />
Any FreeRTOS source code, whether modified or in it's original release form, or whether in whole or in part, can only be distributed by you under the terms of the GNU General Public License plus this exception. An independent module is a module which is not derived from or based on FreeRTOS.<br />
<br />
Clause 1:<br />
<br />
Linking FreeRTOS with other modules is making a combined work based on FreeRTOS. Thus, the terms and conditions of the GNU General Public License V2 cover the whole combination.<br />
<br />
As a special exception, the copyright holders of FreeRTOS give you permission to link FreeRTOS with independent modules to produce a statically linked executable, regardless of the license terms of these independent modules, and to copy and distribute the resulting executable under terms of your choice, provided that you also meet, for each linked independent module, the terms and conditions of the license of that module. An independent module is a module which is not derived from or based on FreeRTOS.<br />
<br />
Clause 2:<br />
<br />
FreeRTOS may not be used for any competitive or comparative purpose, including the publication of any form of run time or compile time metric, without the express permission of Real Time Engineers Ltd. (this is the norm within the industry and is intended to ensure information accuracy).<br />
<br />
The GPL v2 text is available [[FreeRTOS_GPLv2| here]] <br />
<br />
== tlsf ==<br />
The TLSF allocator has been released under a dual license scheme: [http://www.gnu.org/copyleft/gpl.html| GPL] and [http://www.gnu.org/copyleft/lgpl.html| LGPL].<br />
<br />
For the GPL licence, the following exception applies.<br />
<br />
TLSF is free software; you can redistribute it and/or modify it under terms of<br />
the GNU General Public License as published by the Free Software Foundation;<br />
either version 2, or (at your option) any later version. TLSF is distributed<br />
in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the<br />
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See<br />
the GNU General Public License for more details. You should have received a<br />
copy of the GNU General Public License along with TLSF; see file COPYING. If<br />
not, write to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,<br />
USA.<br />
<br />
As a special exception, including TLSF header files in a file, or linking with<br />
other files objects to produce an executable application, is merely considered<br />
normal use of the library, and does *not* fall under the heading of "derived<br />
work". Therfore does not by itself cause the resulting executable application<br />
to be covered by the GNU General Public License. This exception does not<br />
however invalidate any other reasons why the executable file might be covered<br />
by the GNU Public License.<br />
<br />
== lwIP ==<br />
lwIP is licenced under the BSD licence: <br />
<br />
Copyright (c) 2001-2004 Swedish Institute of Computer Science. <br />
All rights reserved. <br />
<br />
Redistribution and use in source and binary forms, with or without modification, <br />
are permitted provided that the following conditions are met: <br />
<br />
1. Redistributions of source code must retain the above copyright notice, <br />
this list of conditions and the following disclaimer. <br />
2. Redistributions in binary form must reproduce the above copyright notice, <br />
this list of conditions and the following disclaimer in the documentation <br />
and/or other materials provided with the distribution. <br />
3. The name of the author may not be used to endorse or promote products <br />
derived from this software without specific prior written permission. <br />
<br />
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS AND ANY EXPRESS OR IMPLIED <br />
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF <br />
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT <br />
SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, <br />
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT <br />
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS <br />
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN <br />
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING <br />
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY <br />
OF SUCH DAMAGE.<br />
<br />
== OpenSSL ==<br />
<br />
LICENSE ISSUES<br />
==============<br />
<br />
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of<br />
the OpenSSL License and the original SSLeay license apply to the toolkit.<br />
See below for the actual license texts. Actually both licenses are BSD-style<br />
Open Source licenses. In case of any license issues related to OpenSSL<br />
please contact openssl-core@openssl.org.<br />
<br />
OpenSSL License<br />
---------------<br />
<br />
/* ====================================================================<br />
* Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved.<br />
*<br />
* Redistribution and use in source and binary forms, with or without<br />
* modification, are permitted provided that the following conditions<br />
* are met:<br />
*<br />
* 1. Redistributions of source code must retain the above copyright<br />
* notice, this list of conditions and the following disclaimer. <br />
*<br />
* 2. Redistributions in binary form must reproduce the above copyright<br />
* notice, this list of conditions and the following disclaimer in<br />
* the documentation and/or other materials provided with the<br />
* distribution.<br />
*<br />
* 3. All advertising materials mentioning features or use of this<br />
* software must display the following acknowledgment:<br />
* "This product includes software developed by the OpenSSL Project<br />
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"<br />
*<br />
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to<br />
* endorse or promote products derived from this software without<br />
* prior written permission. For written permission, please contact<br />
* openssl-core@openssl.org.<br />
*<br />
* 5. Products derived from this software may not be called "OpenSSL"<br />
* nor may "OpenSSL" appear in their names without prior written<br />
* permission of the OpenSSL Project.<br />
*<br />
* 6. Redistributions of any form whatsoever must retain the following<br />
* acknowledgment:<br />
* "This product includes software developed by the OpenSSL Project<br />
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"<br />
*<br />
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY<br />
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE<br />
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR<br />
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR<br />
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,<br />
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT<br />
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;<br />
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)<br />
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,<br />
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)<br />
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED<br />
* OF THE POSSIBILITY OF SUCH DAMAGE.<br />
* ====================================================================<br />
*<br />
* This product includes cryptographic software written by Eric Young<br />
* (eay@cryptsoft.com). This product includes software written by Tim<br />
* Hudson (tjh@cryptsoft.com).<br />
*<br />
*/<br />
<br />
Original SSLeay License<br />
-----------------------<br />
<br />
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)<br />
* All rights reserved.<br />
*<br />
* This package is an SSL implementation written<br />
* by Eric Young (eay@cryptsoft.com).<br />
* The implementation was written so as to conform with Netscapes SSL.<br />
* <br />
* This library is free for commercial and non-commercial use as long as<br />
* the following conditions are aheared to. The following conditions<br />
* apply to all code found in this distribution, be it the RC4, RSA,<br />
* lhash, DES, etc., code; not just the SSL code. The SSL documentation<br />
* included with this distribution is covered by the same copyright terms<br />
* except that the holder is Tim Hudson (tjh@cryptsoft.com).<br />
* <br />
* Copyright remains Eric Young's, and as such any Copyright notices in<br />
* the code are not to be removed.<br />
* If this package is used in a product, Eric Young should be given attribution<br />
* as the author of the parts of the library used.<br />
* This can be in the form of a textual message at program startup or<br />
* in documentation (online or textual) provided with the package.<br />
* <br />
* Redistribution and use in source and binary forms, with or without<br />
* modification, are permitted provided that the following conditions<br />
* are met:<br />
* 1. Redistributions of source code must retain the copyright<br />
* notice, this list of conditions and the following disclaimer.<br />
* 2. Redistributions in binary form must reproduce the above copyright<br />
* notice, this list of conditions and the following disclaimer in the<br />
* documentation and/or other materials provided with the distribution.<br />
* 3. All advertising materials mentioning features or use of this software<br />
* must display the following acknowledgement:<br />
* "This product includes cryptographic software written by<br />
* Eric Young (eay@cryptsoft.com)"<br />
* The word 'cryptographic' can be left out if the rouines from the library<br />
* being used are not cryptographic related :-).<br />
* 4. If you include any Windows specific code (or a derivative thereof) from <br />
* the apps directory (application code) you must include an acknowledgement:<br />
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"<br />
* <br />
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND<br />
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE<br />
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE<br />
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE<br />
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL<br />
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS<br />
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)<br />
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT<br />
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY<br />
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF<br />
* SUCH DAMAGE.<br />
* <br />
* The licence and distribution terms for any publically available version or<br />
* derivative of this code cannot be changed. i.e. this code cannot simply be<br />
* copied and put under another distribution licence<br />
* [including the GNU Public Licence.]<br />
*/<br />
<br />
== FLAC ==<br />
Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2007 Josh Coalson<br />
<br />
Redistribution and use in source and binary forms, with or without<br />
modification, are permitted provided that the following conditions<br />
are met:<br />
<br />
- Redistributions of source code must retain the above copyright<br />
notice, this list of conditions and the following disclaimer.<br />
<br />
- Redistributions in binary form must reproduce the above copyright<br />
notice, this list of conditions and the following disclaimer in the<br />
documentation and/or other materials provided with the distribution.<br />
<br />
- Neither the name of the Xiph.org Foundation nor the names of its<br />
contributors may be used to endorse or promote products derived from<br />
this software without specific prior written permission.<br />
<br />
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS<br />
``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT<br />
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR<br />
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR<br />
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,<br />
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,<br />
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR<br />
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF<br />
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING<br />
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS<br />
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.<br />
<br />
== libogg ==<br />
Copyright (c) 2002, Xiph.org Foundation<br />
<br />
Redistribution and use in source and binary forms, with or without<br />
modification, are permitted provided that the following conditions<br />
are met:<br />
<br />
- Redistributions of source code must retain the above copyright<br />
notice, this list of conditions and the following disclaimer.<br />
<br />
- Redistributions in binary form must reproduce the above copyright<br />
notice, this list of conditions and the following disclaimer in the<br />
documentation and/or other materials provided with the distribution.<br />
<br />
- Neither the name of the Xiph.org Foundation nor the names of its<br />
contributors may be used to endorse or promote products derived from<br />
this software without specific prior written permission.<br />
<br />
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS<br />
``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT<br />
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR<br />
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION<br />
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,<br />
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT<br />
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,<br />
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY<br />
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT<br />
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE<br />
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.<br />
<br />
== Tremor ==<br />
Copyright (c) 2002, Xiph.org Foundation<br />
<br />
Redistribution and use in source and binary forms, with or without<br />
modification, are permitted provided that the following conditions<br />
are met:<br />
<br />
- Redistributions of source code must retain the above copyright<br />
notice, this list of conditions and the following disclaimer.<br />
<br />
- Redistributions in binary form must reproduce the above copyright<br />
notice, this list of conditions and the following disclaimer in the<br />
documentation and/or other materials provided with the distribution.<br />
<br />
- Neither the name of the Xiph.org Foundation nor the names of its<br />
contributors may be used to endorse or promote products derived from<br />
this software without specific prior written permission.<br />
<br />
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS<br />
``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT<br />
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR<br />
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION<br />
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,<br />
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT<br />
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,<br />
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY<br />
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT<br />
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE<br />
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.<br />
<br />
== ALAC ==<br />
Apache License<br />
<br />
Version 2.0, January 2004<br />
<br />
http://www.apache.org/licenses/<br />
<br />
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION<br />
<br />
1. Definitions.<br />
<br />
"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.<br />
<br />
"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.<br />
<br />
"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.<br />
<br />
"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.<br />
<br />
"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.<br />
<br />
"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.<br />
<br />
"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).<br />
<br />
"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.<br />
<br />
"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."<br />
<br />
"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.<br />
<br />
2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.<br />
<br />
3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.<br />
<br />
4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:<br />
<br />
You must give any other recipients of the Work or Derivative Works a copy of this License; and<br />
<br />
You must cause any modified files to carry prominent notices stating that You changed the files; and<br />
<br />
You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and<br />
<br />
If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License. You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.<br />
<br />
5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.<br />
<br />
6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.<br />
<br />
7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.<br />
<br />
8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.<br />
<br />
9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.<br />
<br />
== Functor ==<br />
[[https://github.com/openhome/ohNet/blob/master/OpenHome/Functor.h| Code]] was heavily influenced by the article in http://www.tutok.sk/fastgl/callback.html<br />
The psuedo-code in this article was based on a header (no longer obviously available at tutok.sk) which included the following license:<br />
<br />
Permission to use, copy, modify, distribute and sell this software<br />
for any purpose is hereby granted without fee,<br />
provided that the above copyright notice appear in all copies and<br />
that both that copyright notice and this permission notice appear<br />
in supporting documentation. Rich Hickey makes no<br />
representations about the suitability of this software for any<br />
purpose. It is provided "as is" without express or implied warranty.<br />
<br />
== mDNS ==<br />
Copyright (c) 2002-2003 Apple Computer, Inc. All rights reserved.<br />
<br />
Licensed under the Apache License, Version 2.0 (the "License");<br />
you may not use this file except in compliance with the License.<br />
You may obtain a copy of the License at<br />
<br />
http://www.apache.org/licenses/LICENSE-2.0<br />
<br />
Unless required by applicable law or agreed to in writing, software<br />
distributed under the License is distributed on an "AS IS" BASIS,<br />
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.<br />
See the License for the specific language governing permissions and<br />
limitations under the License.<br />
<br />
== md5 ==<br />
Copyright (C) 1999, 2002 Aladdin Enterprises. All rights reserved.<br />
<br />
This software is provided 'as-is', without any express or implied<br />
warranty. In no event will the authors be held liable for any damages<br />
arising from the use of this software.<br />
<br />
Permission is granted to anyone to use this software for any purpose,<br />
including commercial applications, and to alter it and redistribute it<br />
freely, subject to the following restrictions:<br />
<br />
1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.<br />
<br>2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.<br />
<br>3. This notice may not be removed or altered from any source distribution.<br />
<br />
L. Peter Deutsch<br />
ghost@aladdin.com</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=FreeRTOS_GPLv2&diff=13681
FreeRTOS GPLv2
2017-06-01T09:28:59Z
<p>Simonc: Created page with " GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA E…"</p>
<hr />
<div> GNU GENERAL PUBLIC LICENSE<br />
Version 2, June 1991<br />
Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.<br />
<br />
Preamble<br />
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too.<br />
<br />
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things.<br />
<br />
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.<br />
<br />
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.<br />
<br />
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.<br />
<br />
Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations.<br />
<br />
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.<br />
<br />
The precise terms and conditions for copying, distribution and modification follow. � GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION<br />
<br />
This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you".<br />
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.<br />
<br />
You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.<br />
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.<br />
<br />
You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:<br />
<br />
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.<br />
<br />
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.<br />
<br />
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) � These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.<br />
<br />
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.<br />
<br />
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.<br />
<br />
You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:<br />
<br />
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,<br />
<br />
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,<br />
<br />
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)<br />
<br />
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.<br />
<br />
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. �<br />
<br />
You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.<br />
<br />
You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.<br />
<br />
Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.<br />
<br />
If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.<br />
<br />
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.<br />
<br />
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.<br />
<br />
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. �<br />
<br />
If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.<br />
<br />
The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.<br />
<br />
Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.<br />
<br />
If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.<br />
<br />
NO WARRANTY<br />
BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.<br />
<br />
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.<br />
<br />
END OF TERMS AND CONDITIONS<br />
� How to Apply These Terms to Your New Programs<br />
<br />
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.<br />
<br />
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.<br />
<br />
<one line to give the program's name and a brief idea of what it does.> Copyright (C) <year> <name of author><br />
<br />
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License** as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.<br />
<br />
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.<br />
<br />
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA<br />
<br />
Also add information on how to contact you by electronic and paper mail.<br />
<br />
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:<br />
<br />
Gnomovision version 69, Copyright (C) year name of author<br />
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.<br />
This is free software, and you are welcome to redistribute it<br />
under certain conditions; type `show c' for details.<br />
The hypothetical commands show w' andshow c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than show w' andshow c'; they could even be mouse-clicks or menu items--whatever suits your program.<br />
<br />
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names:<br />
<br />
Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker.<br />
<br />
<signature of Ty Coon>, 1 April 1989 Ty Coon, President of Vice<br />
<br />
This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License.</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=ExaktSurround&diff=13462
ExaktSurround
2017-03-29T08:05:42Z
<p>Simonc: /* Songcast */</p>
<hr />
<div>= Surround sound via Exakt =<br />
== Overview ==<br />
* Exakt surround allows a DSM to receive multi-channel audio over HDMI and play it through an Exakt system. It is usable on any DSM with HDMI inputs and Exakt outputs.<br />
<br />
* Any sensible speaker configuration is supported from 2.0 to 7.4.<br />
<br />
* No need for a dedicated AV processor.<br />
<br />
* No need to manually setup down-mixes or delays.<br />
<br />
* Audio must be delivered to the DSM as '''PCM'''. Most HDMI sources are capable of this; any that don’t (e.g. Apple TV) can be supported using a HDMI repeater that is capable of Dolby/DTS to PCM conversion (e.g. Oppo).<br><br />
<br />
* DSM models with analog as well as Exakt outputs can use the analog outputs to feed one or two non-Exakt speakers (e.g. Exakt fronts with analog surrounds for a 4.0 system).<br><br />
<br />
* Songcast: The surround is downmixed to Stereo for Songcasting to other Linn DS/DSM players<br />
<br />
* Each Exaktbox can support 1 or 2 loudspeakers<br />
<br />
[[image:Eaxkt-Surround.jpg|centre |600px]]<br />
Sample 5.2 system. Front speakers are Exakt, rear speakers are analogue but can be made Exakt with another Exaktbox.<br />
<br />
== Channel Assignment ==<br />
Go to the Exakt tab in your DS configuration page. <br />
[[File:ExaktSurroundExaktTab.png]]<br />
<br><br><br><br />
System configuration is largely like that for a stereo Exakt system: Exaktboxes are configured in the normal way then all channel assignments can be made. Note that the channel options for each speaker now contain all speaker positions for a 7.1 system. <br><br />
[[File:ExaktSurroundChannelOptions.png]]<br />
<br><br><br><br />
If you want to use analog outputs from your DSM for 1 or 2 surround channels, select which speaker(s) are connected then assign channels for these too.<br><br />
[[File:ExaktSurroundAnalogOutputs.png]]<br />
<br><br><br><br />
System setup is very flexible but must follow some basic rules:<br />
* All systems must contain front left & front right<br />
* If rear or surround speakers are present, they must have both left & right<br />
* Surround speakers (i.e., back speakers in a 5.1 setup) must be present before rears (i.e., back speakers in a 7.1 setup) can be used<br />
* Centre and sub are optional but can be used with any other setup<br />
<br><br><br />
Once all channels have been selected, press the Apply button. <br><br />
[[File:ExaktSurroundChannelsApply.png]]<br />
<br><br><br><br />
Note that the configuration for all Exakt devices must be applied together. (This allows Konfig to validate the speaker configuration for the overall system, enforcing the rules above and providing meaningful feedback if an invalid speaker configuration has been selected.)<br />
<br><br />
You can now use the Test button beside each speaker to confirm that channel allocation is correct. If you make any changes (e.g. reversing left/right for a pair of speakers), press Apply again.<br />
<br><br />
No manual setup of down-mix mode is required. Konfig will automatically apply the most appropriate down-mix based on the channels assigned to your speakers.<br />
<br />
== Subs ==<br />
A subwoofer can be assigned one of 4 possible channels:<br />
* Front left<br />
* Front right<br />
* Mono<br />
* LFE<br />
<br />
Selecting front left (or right) instructs the sub to play the same content as the front left (or right) speaker. You should only select this if you have 2 subs, one assigned to each left and right.<br />
<br />
Selecting mono instructs the sub to play a down-mix of both front left and right.<br />
<br />
When using a front left/right sub pair, a mono sub, or no sub, any LFE content will be directed to front left and right speakers.<br />
<br />
Selecting LFE instructs the sub to only play LFE content for multi-channel tracks. An LFE sub will be silent when playing stereo music.<br />
<br />
Sub channel configurations are mutually exclusive. Only one type of sub configuration may be present on any system (a sub configuration counts as a front left/right pair, mono, or LFE).<br />
<br />
== Optimisation ==<br />
The process for this is equivalent to a stereo system, just for more speakers.<br />
<br />
== Delays ==<br />
No setup of speaker delays is required. The linear phase audio delivered by Exakt means that the correct delays have been applied automatically.<br />
<br />
DSM HDMI inputs will default to minimal latency. If you require additional delay for lip sync, the process for this is unchanged – set the delay mode for the relevant HDMI source to “Video sync” then adjust latency using either the Ir remote or the configuration tab in Konfig.<br />
<br />
== Volume Equalisation ==<br />
Once Space+ Optimisation has been applied, you can apply volume offsets to equalise volume between speakers in the system.<br><br />
[[File:ExaktSurroundVolOffsetsEntry.png]]<br />
<br><br><br><br />
Pressing the Play icon beside any speaker will play pink noise through that speaker.<br><br />
[[File:ExaktSurroundVolOffsetsPlayIcon.png]]<br />
<br><br><br><br />
The +/- buttons beside this can be used to adjust volume for that speaker.<br><br />
[[File:ExaktSurroundVolOffsetsPlusMinus.png]]<br />
<br><br><br><br />
Once you have completed setting volume offsets, press Apply.<br><br />
[[File:ExaktSurroundVolOffsetsApply.png]]<br />
<br />
== Switching between surround and stereo modes ==<br />
The DSM will automatically switch between stereo and surround content. No user changes are required.<br />
<br />
== Songcast ==<br />
Songcast of surround streams is not currently supported. A future release will send a stereo down-mix of surround content to any songcast receivers. This will not affect any down-mix applied in your surround system.<br />
<br />
= FAQ's =<br />
'''Q1''': The Klimax Exaktbox has 6 outputs, can I use each output to drive a loudspeaker in my 5.1 surround system?<br><br />
<br />
'''A1''': No, the Exaktboxes are designed with the processor resources,(Exakt Engine), for one or two loudspeaker digital crossovers. Adding more loudspeakers channels and delays will not make the best use of the resources.<br><br><br />
<br />
'''Q2''': I have an exclamation mark icon ('''!''') on my DSM display. What does this mean?<br><br />
<br />
'''A2''': Your DSM has not detected all the speakers that were originally configured for surround. Open Konfig, select your DSM then the Exakt tab to see which speakers have been detected.<br />
<br>If you have removed a speaker from your system (e.g. a centre channel), you may need to temporarily change channel assignment of another speaker. When you return this to its original value, Konfig will allow you to save the new surround configuration.<br />
<br />
'''Q3''': Do my front left/right speakers always have to be Exakt speakers?<br><br />
<br />
'''A3''': No you can configure the analogue outputs of you Majik/Akurate/Klimax DSM to feed the front left/right and the Exaktbox/Exakt speakers for any other channels. However this will not be the best Musical option as the passive speaker will never sound as good as the fully Exakt'ed speakers.</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=ExaktSurround&diff=13461
ExaktSurround
2017-03-29T08:02:46Z
<p>Simonc: /* FAQ's */</p>
<hr />
<div>= Surround sound via Exakt =<br />
== Overview ==<br />
* Exakt surround allows a DSM to receive multi-channel audio over HDMI and play it through an Exakt system. It is usable on any DSM with HDMI inputs and Exakt outputs.<br />
<br />
* Any sensible speaker configuration is supported from 2.0 to 7.4.<br />
<br />
* No need for a dedicated AV processor.<br />
<br />
* No need to manually setup down-mixes or delays.<br />
<br />
* Audio must be delivered to the DSM as '''PCM'''. Most HDMI sources are capable of this; any that don’t (e.g. Apple TV) can be supported using a HDMI repeater that is capable of Dolby/DTS to PCM conversion (e.g. Oppo).<br><br />
<br />
* DSM models with analog as well as Exakt outputs can use the analog outputs to feed one or two non-Exakt speakers (e.g. Exakt fronts with analog surrounds for a 4.0 system).<br><br />
<br />
* Songcast: The surround is downmixed to Stereo for Songcasting to other Linn DS/DSM players<br />
<br />
* Each Exaktbox can support 1 or 2 loudspeakers<br />
<br />
[[image:Eaxkt-Surround.jpg|centre |600px]]<br />
Sample 5.2 system. Front speakers are Exakt, rear speakers are analogue but can be made Exakt with another Exaktbox.<br />
<br />
== Channel Assignment ==<br />
Go to the Exakt tab in your DS configuration page. <br />
[[File:ExaktSurroundExaktTab.png]]<br />
<br><br><br><br />
System configuration is largely like that for a stereo Exakt system: Exaktboxes are configured in the normal way then all channel assignments can be made. Note that the channel options for each speaker now contain all speaker positions for a 7.1 system. <br><br />
[[File:ExaktSurroundChannelOptions.png]]<br />
<br><br><br><br />
If you want to use analog outputs from your DSM for 1 or 2 surround channels, select which speaker(s) are connected then assign channels for these too.<br><br />
[[File:ExaktSurroundAnalogOutputs.png]]<br />
<br><br><br><br />
System setup is very flexible but must follow some basic rules:<br />
* All systems must contain front left & front right<br />
* If rear or surround speakers are present, they must have both left & right<br />
* Surround speakers (i.e., back speakers in a 5.1 setup) must be present before rears (i.e., back speakers in a 7.1 setup) can be used<br />
* Centre and sub are optional but can be used with any other setup<br />
<br><br><br />
Once all channels have been selected, press the Apply button. <br><br />
[[File:ExaktSurroundChannelsApply.png]]<br />
<br><br><br><br />
Note that the configuration for all Exakt devices must be applied together. (This allows Konfig to validate the speaker configuration for the overall system, enforcing the rules above and providing meaningful feedback if an invalid speaker configuration has been selected.)<br />
<br><br />
You can now use the Test button beside each speaker to confirm that channel allocation is correct. If you make any changes (e.g. reversing left/right for a pair of speakers), press Apply again.<br />
<br><br />
No manual setup of down-mix mode is required. Konfig will automatically apply the most appropriate down-mix based on the channels assigned to your speakers.<br />
<br />
== Subs ==<br />
A subwoofer can be assigned one of 4 possible channels:<br />
* Front left<br />
* Front right<br />
* Mono<br />
* LFE<br />
<br />
Selecting front left (or right) instructs the sub to play the same content as the front left (or right) speaker. You should only select this if you have 2 subs, one assigned to each left and right.<br />
<br />
Selecting mono instructs the sub to play a down-mix of both front left and right.<br />
<br />
When using a front left/right sub pair, a mono sub, or no sub, any LFE content will be directed to front left and right speakers.<br />
<br />
Selecting LFE instructs the sub to only play LFE content for multi-channel tracks. An LFE sub will be silent when playing stereo music.<br />
<br />
Sub channel configurations are mutually exclusive. Only one type of sub configuration may be present on any system (a sub configuration counts as a front left/right pair, mono, or LFE).<br />
<br />
== Optimisation ==<br />
The process for this is equivalent to a stereo system, just for more speakers.<br />
<br />
== Delays ==<br />
No setup of speaker delays is required. The linear phase audio delivered by Exakt means that the correct delays have been applied automatically.<br />
<br />
DSM HDMI inputs will default to minimal latency. If you require additional delay for lip sync, the process for this is unchanged – set the delay mode for the relevant HDMI source to “Video sync” then adjust latency using either the Ir remote or the configuration tab in Konfig.<br />
<br />
== Volume Equalisation ==<br />
Once Space+ Optimisation has been applied, you can apply volume offsets to equalise volume between speakers in the system.<br><br />
[[File:ExaktSurroundVolOffsetsEntry.png]]<br />
<br><br><br><br />
Pressing the Play icon beside any speaker will play pink noise through that speaker.<br><br />
[[File:ExaktSurroundVolOffsetsPlayIcon.png]]<br />
<br><br><br><br />
The +/- buttons beside this can be used to adjust volume for that speaker.<br><br />
[[File:ExaktSurroundVolOffsetsPlusMinus.png]]<br />
<br><br><br><br />
Once you have completed setting volume offsets, press Apply.<br><br />
[[File:ExaktSurroundVolOffsetsApply.png]]<br />
<br />
== Switching between surround and stereo modes ==<br />
The DSM will automatically switch between stereo and surround content. No user changes are required.<br />
<br />
== Songcast ==<br />
A stereo down-mix of surround content will be sent to any songcast receivers. This does not affect any down-mix applied in your surround system.<br />
<br />
= FAQ's =<br />
'''Q1''': The Klimax Exaktbox has 6 outputs, can I use each output to drive a loudspeaker in my 5.1 surround system?<br><br />
<br />
'''A1''': No, the Exaktboxes are designed with the processor resources,(Exakt Engine), for one or two loudspeaker digital crossovers. Adding more loudspeakers channels and delays will not make the best use of the resources.<br><br><br />
<br />
'''Q2''': I have an exclamation mark icon ('''!''') on my DSM display. What does this mean?<br><br />
<br />
'''A2''': Your DSM has not detected all the speakers that were originally configured for surround. Open Konfig, select your DSM then the Exakt tab to see which speakers have been detected.<br />
<br>If you have removed a speaker from your system (e.g. a centre channel), you may need to temporarily change channel assignment of another speaker. When you return this to its original value, Konfig will allow you to save the new surround configuration.<br />
<br />
'''Q3''': Do my front left/right speakers always have to be Exakt speakers?<br><br />
<br />
'''A3''': No you can configure the analogue outputs of you Majik/Akurate/Klimax DSM to feed the front left/right and the Exaktbox/Exakt speakers for any other channels. However this will not be the best Musical option as the passive speaker will never sound as good as the fully Exakt'ed speakers.</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=ExaktSurround&diff=13460
ExaktSurround
2017-03-29T07:58:22Z
<p>Simonc: Fixed negative, sometime incorrect, language</p>
<hr />
<div>= Surround sound via Exakt =<br />
== Overview ==<br />
* Exakt surround allows a DSM to receive multi-channel audio over HDMI and play it through an Exakt system. It is usable on any DSM with HDMI inputs and Exakt outputs.<br />
<br />
* Any sensible speaker configuration is supported from 2.0 to 7.4.<br />
<br />
* No need for a dedicated AV processor.<br />
<br />
* No need to manually setup down-mixes or delays.<br />
<br />
* Audio must be delivered to the DSM as '''PCM'''. Most HDMI sources are capable of this; any that don’t (e.g. Apple TV) can be supported using a HDMI repeater that is capable of Dolby/DTS to PCM conversion (e.g. Oppo).<br><br />
<br />
* DSM models with analog as well as Exakt outputs can use the analog outputs to feed one or two non-Exakt speakers (e.g. Exakt fronts with analog surrounds for a 4.0 system).<br><br />
<br />
* Songcast: The surround is downmixed to Stereo for Songcasting to other Linn DS/DSM players<br />
<br />
* Each Exaktbox can support 1 or 2 loudspeakers<br />
<br />
[[image:Eaxkt-Surround.jpg|centre |600px]]<br />
Sample 5.2 system. Front speakers are Exakt, rear speakers are analogue but can be made Exakt with another Exaktbox.<br />
<br />
== Channel Assignment ==<br />
Go to the Exakt tab in your DS configuration page. <br />
[[File:ExaktSurroundExaktTab.png]]<br />
<br><br><br><br />
System configuration is largely like that for a stereo Exakt system: Exaktboxes are configured in the normal way then all channel assignments can be made. Note that the channel options for each speaker now contain all speaker positions for a 7.1 system. <br><br />
[[File:ExaktSurroundChannelOptions.png]]<br />
<br><br><br><br />
If you want to use analog outputs from your DSM for 1 or 2 surround channels, select which speaker(s) are connected then assign channels for these too.<br><br />
[[File:ExaktSurroundAnalogOutputs.png]]<br />
<br><br><br><br />
System setup is very flexible but must follow some basic rules:<br />
* All systems must contain front left & front right<br />
* If rear or surround speakers are present, they must have both left & right<br />
* Surround speakers (i.e., back speakers in a 5.1 setup) must be present before rears (i.e., back speakers in a 7.1 setup) can be used<br />
* Centre and sub are optional but can be used with any other setup<br />
<br><br><br />
Once all channels have been selected, press the Apply button. <br><br />
[[File:ExaktSurroundChannelsApply.png]]<br />
<br><br><br><br />
Note that the configuration for all Exakt devices must be applied together. (This allows Konfig to validate the speaker configuration for the overall system, enforcing the rules above and providing meaningful feedback if an invalid speaker configuration has been selected.)<br />
<br><br />
You can now use the Test button beside each speaker to confirm that channel allocation is correct. If you make any changes (e.g. reversing left/right for a pair of speakers), press Apply again.<br />
<br><br />
No manual setup of down-mix mode is required. Konfig will automatically apply the most appropriate down-mix based on the channels assigned to your speakers.<br />
<br />
== Subs ==<br />
A subwoofer can be assigned one of 4 possible channels:<br />
* Front left<br />
* Front right<br />
* Mono<br />
* LFE<br />
<br />
Selecting front left (or right) instructs the sub to play the same content as the front left (or right) speaker. You should only select this if you have 2 subs, one assigned to each left and right.<br />
<br />
Selecting mono instructs the sub to play a down-mix of both front left and right.<br />
<br />
When using a front left/right sub pair, a mono sub, or no sub, any LFE content will be directed to front left and right speakers.<br />
<br />
Selecting LFE instructs the sub to only play LFE content for multi-channel tracks. An LFE sub will be silent when playing stereo music.<br />
<br />
Sub channel configurations are mutually exclusive. Only one type of sub configuration may be present on any system (a sub configuration counts as a front left/right pair, mono, or LFE).<br />
<br />
== Optimisation ==<br />
The process for this is equivalent to a stereo system, just for more speakers.<br />
<br />
== Delays ==<br />
No setup of speaker delays is required. The linear phase audio delivered by Exakt means that the correct delays have been applied automatically.<br />
<br />
DSM HDMI inputs will default to minimal latency. If you require additional delay for lip sync, the process for this is unchanged – set the delay mode for the relevant HDMI source to “Video sync” then adjust latency using either the Ir remote or the configuration tab in Konfig.<br />
<br />
== Volume Equalisation ==<br />
Once Space+ Optimisation has been applied, you can apply volume offsets to equalise volume between speakers in the system.<br><br />
[[File:ExaktSurroundVolOffsetsEntry.png]]<br />
<br><br><br><br />
Pressing the Play icon beside any speaker will play pink noise through that speaker.<br><br />
[[File:ExaktSurroundVolOffsetsPlayIcon.png]]<br />
<br><br><br><br />
The +/- buttons beside this can be used to adjust volume for that speaker.<br><br />
[[File:ExaktSurroundVolOffsetsPlusMinus.png]]<br />
<br><br><br><br />
Once you have completed setting volume offsets, press Apply.<br><br />
[[File:ExaktSurroundVolOffsetsApply.png]]<br />
<br />
== Switching between surround and stereo modes ==<br />
The DSM will automatically switch between stereo and surround content. No user changes are required.<br />
<br />
== Songcast ==<br />
A stereo down-mix of surround content will be sent to any songcast receivers. This does not affect any down-mix applied in your surround system.<br />
<br />
= FAQ's =<br />
'''Q1''': The Klimax Exaktbox has 6 outputs, can I use each output to drive a loudspeaker in my 5.1 surround system?<br><br />
<br />
'''A1''': No, the Exaktboxes are designed with the processor resources,(Exakt Engine), for one or two loudspeaker digital crossovers. Adding more loudspeakers channels and delays will not make the best use of the resources.<br><br><br />
<br />
'''Q2''': Do my front left/right speakers always have to be Exakt speakers?<br><br />
<br />
'''A2''': No you can configure the analogue outputs of you Majik/Akurate/Klimax DSM to feed the front left/right and the Exaktbox/Exakt speakers for any other channels. However this will not be the best Musical option as the passive speaker will never sound as good as the fully Exakt'ed speakers.</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=ExaktSurround&diff=13246
ExaktSurround
2017-02-08T16:04:40Z
<p>Simonc: /* Volume Equalisation */</p>
<hr />
<div>= Surround sound via Exakt =<br />
== Overview ==<br />
Exakt surround allows a DSM to receive multi-channel audio over HDMI and play it through an Exakt system. It is usable on any DSM with HDMI inputs and Exakt outputs.<br />
<br />
Any sensible speaker configuration is supported from 2.0 to 7.4.<br />
<br />
No need for a dedicated AV processor.<br />
<br />
No need to manually setup down-mixes or delays.<br />
<br />
Audio must be delivered to the DSM as PCM. Most HDMI sources are capable of this; any that don’t (e.g. Apple TV) can be supported using a HDMI repeater that is capable of Dolby/DTS to PCM conversion (e.g. Oppo).<br />
<br />
DSM models with analog as well as Exakt outputs can use the analog outputs to feed one or two non-Exakt speakers (e.g. Exakt fronts with analog surrounds for a 4.0 system).<br />
<br />
== Channel Assignment ==<br />
Go to the Exakt tab in your DS’ configuration page. <br />
[[File:ExaktSurroundExaktTab.png]]<br />
<br />
System configuration is largely like that for a stereo Exakt system: Exaktboxes are configured in the normal way then all channel assignments can be made. Note that the channel options for each speaker now contain all speaker positions for a 7.1 system. <br />
[[File:ExaktSurroundChannelOptions.png]]<br />
<br />
If you want to use analog outputs from your DSM for 1 or 2 surround channels, select which speaker(s) are connected then assign channels for these too.<br />
[[File:ExaktSurroundAnalogOutputs.png]]<br />
<br />
System setup is very flexible but must follow some basic rules:<br />
* All systems must contain front left & front right<br />
* If rear or surround speakers are present, they must have both left & right<br />
* Surround speakers must be present before rears can be used<br />
* Centre and sub are optional but can be used with any other setup<br />
<br />
Once all channels have been selected, press the Apply button. <br />
[[File:ExaktSurroundChannelsApply.png]]<br />
<br />
Note that the configuration for all Exakt devices must be applied together. (This allows Konfig to validate the speaker configuration for the overall system, enforcing the rules above and providing meaningful feedback if an invalid speaker configuration has been selected.)<br />
<br />
You can now use the Test button beside each speaker to confirm that channel allocation is correct. If you make any changes (e.g. reversing left/right for a pair of speakers), press Apply again.<br />
<br />
No manual setup of down-mix mode is required. Konfig will automatically apply the most appropriate down-mix based on the channels assigned to your speakers.<br />
<br />
== Subs ==<br />
A subwoofer can be assigned one of 4 possible channels:<br />
* Mono<br />
* LFE<br />
* Front left<br />
* Front right<br />
<br />
Selecting front left (or right) instructs the sub to play the same content as the front left (or right) speaker. You should only select this if you have 2 subs, one assigned to each left and right.<br />
<br />
Selecting mono instructs the sub to play a down-mix of both front left and right.<br />
<br />
Selecting LFE instructs the sub to only play LFE content for multi-channel tracks. An LFE sub will be silent when playing stereo music.<br />
<br />
Note that if no LFE sub is defined, LFE content will be directed to front left & right speakers.<br />
<br />
== Optimisation ==<br />
The process for this is equivalent to a stereo system, just for more speakers.<br />
<br />
== Delays ==<br />
No setup of speaker delays is required. The linear phase audio delivered by Exakt means that the correct delays have been applied automatically.<br />
<br />
DSM HDMI inputs will default to minimal latency. If you require additional delay for lip sync, the process for this is unchanged – set the delay mode for the relevant HDMI source to “Video sync” then adjust latency using either the Ir remote or the configuration tab in Konfig.<br />
<br />
== Volume Equalisation ==<br />
Once Space+ Optimisation has been applied, you can apply volume offsets to equalise volume between speakers in the system.<br />
[[File:ExaktSurroundVolOffsetsEntry.png]]<br />
<br />
Pressing the Play icon beside any speaker will play pink noise through that speaker.<br />
[[File:ExaktSurroundVolOffsetsPlayIcon.png]]<br />
<br />
The +/- buttons beside this can be used to adjust volume for that speaker.<br />
[[File:ExaktSurroundVolOffsetsPlusMinus.png]]<br />
<br />
Once you have completed setting volume offsets, press Apply.<br />
[[File:ExaktSurroundVolOffsetsApply.png]]<br />
<br />
== Switching between surround and stereo modes ==<br />
The DSM will automatically switch between stereo and surround content. No user changes are required.<br />
<br />
== Songcast ==<br />
A stereo down-mix of surround content will be sent to any songcast receivers. This does not affect any down-mix applied in your surround system.</div>
Simonc
https://docs.linn.co.uk/wiki/index.php?title=ExaktSurround&diff=13245
ExaktSurround
2017-02-08T15:48:54Z
<p>Simonc: </p>
<hr />
<div>= Surround sound via Exakt =<br />
== Overview ==<br />
Exakt surround allows a DSM to receive multi-channel audio over HDMI and play it through an Exakt system. It is usable on any DSM with HDMI inputs and Exakt outputs.<br />
<br />
Any sensible speaker configuration is supported from 2.0 to 7.4.<br />
<br />
No need for a dedicated AV processor.<br />
<br />
No need to manually setup down-mixes or delays.<br />
<br />
Audio must be delivered to the DSM as PCM. Most HDMI sources are capable of this; any that don’t (e.g. Apple TV) can be supported using a HDMI repeater that is capable of Dolby/DTS to PCM conversion (e.g. Oppo).<br />
<br />
DSM models with analog as well as Exakt outputs can use the analog outputs to feed one or two non-Exakt speakers (e.g. Exakt fronts with analog surrounds for a 4.0 system).<br />
<br />
== Channel Assignment ==<br />
Go to the Exakt tab in your DS’ configuration page. <br />
[[File:ExaktSurroundExaktTab.png]]<br />
<br />
System configuration is largely like that for a stereo Exakt system: Exaktboxes are configured in the normal way then all channel assignments can be made. Note that the channel options for each speaker now contain all speaker positions for a 7.1 system. <br />
[[File:ExaktSurroundChannelOptions.png]]<br />
<br />
If you want to use analog outputs from your DSM for 1 or 2 surround channels, select which speaker(s) are connected then assign channels for these too.<br />
[[File:ExaktSurroundAnalogOutputs.png]]<br />
<br />
System setup is very flexible but must follow some basic rules:<br />
* All systems must contain front left & front right<br />
* If rear or surround speakers are present, they must have both left & right<br />
* Surround speakers must be present before rears can be used<br />
* Centre and sub are optional but can be used with any other setup<br />
<br />
Once all channels have been selected, press the Apply button. <br />
[[File:ExaktSurroundChannelsApply.png]]<br />
<br />
Note that the configuration for all Exakt devices must be applied together. (This allows Konfig to validate the speaker configuration for the overall system, enforcing the rules above and providing meaningful feedback if an invalid speaker configuration has been selected.)<br />
<br />
You can now use the Test button beside each speaker to confirm that channel allocation is correct. If you make any changes (e.g. reversing left/right for a pair of speakers), press Apply again.<br />
<br />
No manual setup of down-mix mode is required. Konfig will automatically apply the most appropriate down-mix based on the channels assigned to your speakers.<br />
<br />
== Subs ==<br />
A subwoofer can be assigned one of 4 possible channels:<br />
* Mono<br />
* LFE<br />
* Front left<br />
* Front right<br />
<br />
Selecting front left (or right) instructs the sub to play the same content as the front left (or right) speaker. You should only select this if you have 2 subs, one assigned to each left and right.<br />
<br />
Selecting mono instructs the sub to play a down-mix of both front left and right.<br />
<br />
Selecting LFE instructs the sub to only play LFE content for multi-channel tracks. An LFE sub will be silent when playing stereo music.<br />
<br />
Note that if no LFE sub is defined, LFE content will be directed to front left & right speakers.<br />
<br />
== Optimisation ==<br />
The process for this is equivalent to a stereo system, just for more speakers.<br />
<br />
== Delays ==<br />
No setup of speaker delays is required. The linear phase audio delivered by Exakt means that the correct delays have been applied automatically.<br />
<br />
DSM HDMI inputs will default to minimal latency. If you require additional delay for lip sync, the process for this is unchanged – set the delay mode for the relevant HDMI source to “Video sync” then adjust latency using either the Ir remote or the configuration tab in Konfig.<br />
<br />
== Volume Equalisation ==<br />
Once Space+ Optimisation has been applied, you can apply volume offsets to equalise volume between speakers in the system.<br />
[[File:ExaktSurroundVolOffsetsEntry.png]]<br />
<br />
Pressing the Play icon beside any speaker will play pink noise through that speaker.<br />
[[File:ExaktSurroundVolOffsetsPlayIcon.png]]<br />
<br />
The +/- buttons beside this can be used to adjust volume for that speaker.<br />
[[File:ExaktSurroundVolOffsetsPlusMinus.png]]<br />
Once you have completed setting volume offsets, press Apply.<br />
[[File:ExaktSurroundVolOffsetsApply.png]]<br />
<br />
== Switching between surround and stereo modes ==<br />
The DSM will automatically switch between stereo and surround content. No user changes are required.<br />
<br />
== Songcast ==<br />
A stereo down-mix of surround content will be sent to any songcast receivers. This does not affect any down-mix applied in your surround system.</div>
Simonc