Setting up /configuring the Linn DS/DSM

From LinnDocs
Revision as of 09:13, 16 January 2019 by Yoda (talk | contribs)
Jump to: navigation, search

There are currently two ways to configure the Linn DS/DSM products


1. Using Konfig software ∧ ∨


Before setup

The system need to be fully installed and connected together before this can be done properly. Some of the Linn DS/DSM products use Exakt devices. These communicate to the Linn DS/DSM via the Exakt-link and configuration of these products are performed through the Linn DS/DSM.

The other requirement is an internet connection. This will allow the Konfig software to check the internet for any software updates as well as the "cloud" information for Linn product configuration:





2. Manage systems (web-based setup) ∧ ∨

Before setup

The system need to be fully installed and connected together before this can be done properly. Some of the Linn DS/DSM products use Exakt devices. These communicate to the Linn DS/DSM via the Exakt-link and configuration of these products are performed through the Linn DS/DSM.

The other requirement is an internet connection. This will allow the Manage system to access your Linn DS/DSM from the internet connection: