Configuration:Change Configuration

From LinnDocs
Revision as of 07:48, 8 August 2023 by Yoda (talk | contribs)
Jump to: navigation, search
Change Configuration

lEFT

Kk Speakers.png
Speaker
This allows you to add new speakers
Or delete the speaker setup by hitting the X on the right side of the listing





OR


KK Select Mode.png
Select Mode
This is ONLY for ExaktBox /Selekt products.
Typically you will have:
Mono: To work as an Exakt crossover for one loudspeaker
Stereo: To work as an Exakt crossover for a pair of loudspeakers
Stereo Passthrough: ONLY for Selekt DSM. This will allow each cartridge to Play the same stereo audio channels with no crossover filtering.
Surround Passthrough: To define the Surround channels assigned and what loudspeaker is being used.





Kk Select Spkr.png
Selekt Speaker
Channel: This refers to the audio channel for this/these loudspeakers.
If you have set for Mono mode above, this will show single channels, FL, FR, Cen...
All other modes will allow to setup for channels pairs and single channels.
Manufacturer: This is the Manufacturer of the speaker attached to the defined channel. E.g. Linn
Model:This is the model of the speaker attached to the defined channel. E.g. Klimax 350
(In Mono & Stereo mode this is used for the Exakt crossover profile.
In Stereo Passthrough & Surround Stereo mode this is used for Space Optimisation and speaker distancing.)
KK Add Speakers.png



In Surround Passthrough mode it will then ask you if you want to add more loudspeakers for more Surround channels





Confirmation Selection
This is to confirm your configuration and include any wiring diagrams before programming the system
The > X allows you to delete these channels from the configuration.