Difference between revisions of "Akubarik"

From LinnDocs
Jump to: navigation, search
(Back Panel Connections)
Line 14: Line 14:
  
  
== '''Support''' ==
 
  
[http://www.linn.co.uk/support Linn Support Site]
 
  
  
  
 
== '''Manuals''' ==
 
== '''Manuals''' ==
 +
 +
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]
  
 
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]
 
[http://docs.linn.co.uk/wiki/images/1/1b/Linn_Safety_Info.pdf Safety Information]
  
 
[http://www.linn.co.uk/warranty Warranty Terms & Conditions]
 
[http://www.linn.co.uk/warranty Warranty Terms & Conditions]
 +
 +
[http://www.linn.co.uk/support Linn Support Site]
  
  

Revision as of 15:34, 17 April 2013

Akubarik Wal 3Q.jpg


Product info

  • Product Name: AKUBARIK
  • Date of Introduction: April 2013
  • Type: Integrated Aktiv Isobarik Loudspeaker
  • Features




Manuals

Safety Information

Safety Information

Warranty Terms & Conditions

Linn Support Site


Back Panel Connections

Image:Akubarik_underside.jpg


  1. MAINS SWITCH - Power on / off switch.
  2. MAINS INPUT - To connect to the mains electricity supply.
  3. BALANCED IN - To connect pre-amp outputs with balanced (XLR) outputs*.



Installation

We recommend that your Akubarik loudspeakers are unpacked, installed and adjusted by an authorised Linn retailer. To get the best from your Akubarik loudspeakers, it is important that they are positioned and levelled correctly.

Please note, in order to achieve the very best from your Akubarik, some adjustment may be required after positioning, levelling and connecting. See the Fine adjustment section.


For further assistance, try our customer support pages or the Linn Forum.


Fine Adjustments

Once your Akubariks are correctly positioned, levelled and connected, some tuning of the sound may benefit the performance. The acoustics of a room are dependent on many factors including size, shape, contents and textures. The information below will assist in helping you to achieve optimum sound from your loudspeakers in any setting.

The Akubariks are provided with two adjustment switches on the back panel. The factory settings will provide the best performance in the majority of room settings, however if a room's acoustics are found to be a little bright or perhaps a bit bass-heavy, these switches allow certain parameters to be fine-tuned, in order to allow the loudspeaker performance to match the room acoustics more closely.

Akubarik pots.jpg




Switch Function Available Settings Factory Default Setting
Roll-On Set frequency of high pass filter 20Hz, 40Hz, 60Hz 20Hz
Bass Cut Reduce Bass level 0dB to -7dB (1dB steps) 0dB
Mid Adjust gain of Midrange -1.5dB to +2dB (in 0.5dB steps) *
Tweeter Adjust gain of Tweeter -1.5dB to +2dB (in 0.5dB steps) *
Super Tweeter Adjust gain of Super Tweeter -1.5dB to +2dB (in 0.5dB steps) *



* - Individually tuned at factory to match specific 3K Array

NB:- Invalid settings will mute the entire speaker and light Blue and Red LEDs together.