WIP/Tech Specs

From LinnDocs
Revision as of 14:04, 22 December 2022 by Yoda (talk | contribs)
Jump to: navigation, search

Existing specs

Draft spec
Technical Specification

Klimax_DSM/0

Overview
  • Product Name: Klimax DSM (2011 Variant)
Other variants of this product can be found at Klimax DSM Variants
  • Date of Introduction: October 2011 - May 2014
Replaced by Klimax DSM/1
  • Type: Integrated digital music player and preamplifier
Dimensions

(H) 90 mm x (W) 350 mm x (D) 355 mm
(H) 2.3inches x (W) 15.0 inches x (D) 14.2 inches

Weight 8.6 kg / 19 lb
Mains supply voltage (auto ranging)
100–120 V ac (±10%) 50–60 Hz
200–240 V ac (±10%) 50–60 Hz
Power consumption Sleep 9 W
Power continuous 22W max
Supported file types FLAC, WAV, MP3, AAC, AIFF/AIFC, ALAC, OGG/VORBIS, WMA, DSD (DSF and DFF)
Audio sample rates 7.35 k, 8 k, 11.025 k, 12 k, 14.7 k, 16 k, 22.05 k, 24 k,29.4 k, 32 k, 44.1 k, 48 k, 88.2 k, 96 k, 176.4 k, 192 k
Word depths 16–24 bits
Control protocol Compatible with UPnP™ media servers, UPnP™ AV 1.0 control points
Ethernet 100Base-T RJ45
EXAKT None
Volume Control Analog Attenuation Selectable: 0 / -12 / -24 dB

Digital Gain Range -80db to +20dB Digital Gain Resolution 1dB

inputs

1off Ethernet

1off XLR Balanced Line Level

Input sensitivity Selectable: 1 / 2 / 4 Vrms
Input impedance - 7.8 kΩ
2off RCA Unbalanced Line level,
One RCA input is dealer configurable as either line-level or phono. Phono stage can be either MM or MC.
Line Level
Input sensitivity Selectable: 1 / 2 / 4 Vrms
Input impedance - 10 kΩ
RCA input (MC phono stage) :
Input Impedance 180Ω / 10nF
Max. Input Voltage 5.0 mV @ 1 kHz (high gain setting)
Gain +64 dB @ 1 kHz (high gain setting)

                    +54 dB @ 1 kHz (low gain setting)

Signal-to-noise ratio Better than 90 dB
RCA input (MM phono stage) :
nput Impedance 47kΩ / 68pF
Max. Input Voltage 70.0 mV @ 1 kHz
Gain +40 dB @ 1 kHz
Signal-to-noise ratio Better than 90 dB


1off Aux Input (front panel) 3.5mm socket
Input sensitivity Selectable: 1 / 2 / 4 Vrms
Input impedance - 10 kΩ
3off Toslink
Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz
3off SPDIF
Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz
Min. Input Voltage: 0.3V (when terminated with 75 ohms)
Nominal input voltage 0.5 V peak
4off HDMI
HDMI 1.4 Repeater
Sources LAN
Internet radio
Tidal
Qobuz
Calm Radio
Spotify Connect
NetAux
Roon
OUTPUTS
1off XLR Output
Max. Output Voltage 4Vrms (0dBFS, vol. 80)
Output Impedance 600Ω
2off RCA Outputs :
Max. Output Voltage 2Vrms (0dBFS, vol. 80)
Output Impedance 300Ω
1off 3.5mm Headphone Output :
Max. Output Voltage 2Vrms (0dBFS, vol. 80)
Output Impedance <2Ω
Output current 40mA in Class-A
1off SPDIF Output :(Line level . NO volume control)
Output Voltage 0.5V (when terminated with 75 ohms)
Output Impedance 75 Ohms
1 x TOSLINK :(Line level . NO volume control)
1 x HDMI
HDMI 1.4 Repeater