ExaktBox Sub

From LinnDocs
Revision as of 14:20, 6 October 2015 by Yoda (talk | contribs) (Product info)
Jump to: navigation, search
Linn-Exaktbox-Sub-3Q-Web-Res.jpg


Product info

  • Product Name: ExaktBox Sub


  • Date of Introduction: September 2015
  • Type: Exakt Digital Crossover with DAC designed for use with subwoofers
Configurable for one or two subwoofers
Software upgradable to support more and more subwoofers
Connects to internal subwoofer power amplifiers
  • Can only be used with Exakt-Link output products & Exakt speakers/Exaktbox

Support

Linn Support Site

Latest software

Latest software releases

Open source software

Manuals

Konfig manual

Space Optimisation+

Space Optimisation (Advanced)

Safety Information

Warranty Terms and Conditions

Back Panel Connections

Linn-Exaktbox-Sub-rear-Connections.jpg


  1. MAINS INPUT - To connect to the mains electricity supply.
  2. EXAKT LINK- To connect to Exakt compatible devices (CAT-5 cables)
  3. ANALOGUE OUTPUTS (XLR,variable level) - To connect to power amplifiers with balanced (XLR) analogue inputs. (300ohm Output impedance)
  4. ANALOGUE OUTPUTS (RCA, variable level) - To connect to power amplifier with unbalanced (RCA) analogue inputs. (300ohm Output impedance)
  5. FALLBACK - To put the device into Fallback mode (used when reprogramming the unit).

Note: Both XLR and RCA outputs are active simulatneously.

EXAKT LINK Connections

Image:Exakt Link.jpg


Example if you are using a Klimaxe DSM/1, Akudoriks and Exaktbox sub:

ExaktSub links.jpg


The Exakt-link cable can supply digital audio for multiple speakers.
Use Konfig > Exakt Setup pages to declare if Channel1 is left or right hand channel, Channel2 is left or right hand channel and the type/quantity of subwoofers to the Exaktbox sub

Check HERE for more information of Exakt link connection



EXAKT LED Status

Image:Akurate ExaktBox

LED

OFF

ON

Flash / Blink

0 Master Port - BLUE No Link Link Discovered Link Activity
0 Master Port - RED No Link No MAINS POWER N/A
1 Audio Clock No Clock Clock locked Clock not locked
2 Slave Port No Link Link Enabled Link Activity
3 Software Status Not Configured Running Hardware Fault













Linn-Exaktbox-Sub-front-Web-Res.jpg


Front panel LED

Blue LED

STATUS


OFF No Power (Exaktbox OFF)
ON Active (Exaktbox ON)
Slow flash Discovering
Fast flash Configuring
slow Dim/BRIGHT flash Fallback mode
fast Dim/BRIGHT flash Reflashing










Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

  • The ExaktBox is shipped from Linn with no speaker setup and must be configured with Konfig software.

Operation

The Exaktbox Sub can only be used in conjunction with Exakt speakers or Exaktboxes.

If you try and connect up thee Exaktbox sub with non-Exakt speakers, Konfig will enable Space Optimisation+ and only list the Exakt products, it will NOT list any passive speakers. This means that you cannot setup for room for Space optimisation as only the Exaktbox sub can be setup.

Setup the Exaktbox Sub in the same manner as an Akurate Exaktbox, select the Speaker (or sub-woofer in this case), enter the serial number and which channel to process -left, right or Mono. (If you are using two sub-woofers define one as left and one as right. If you are only using one subwoofer select Mono)


Exakt options

Exakt usage can be found in Klimax_Exakt_System

One of the beneifts of the Exakt system is that you can easily setup and optimise your listening environment. Simply download the latest version of Konfig (version 4.11.7 or higher) and follow the Space_Optimsation+ & Space Optimisation+ (Advanced)



Supported subwoofer

  • Afekt (1off or 2off)
  • Akurate 226 (1off or 2off)
  • AV5150 (1off or 2off)
  • Klimax 345 (1off or 2off)
  • Majik 126 (1off or 2off)
  • Melodik (1off or 2off)
  • Sizmik (1off or 2off)


Trouble shooting

Check Exakt trouble shooting

For further assistance, try our customer support pages or the Linn Forum.