Difference between revisions of "REM 020"

From LinnDocs
Jump to: navigation, search
(→‎IR Functions)
(→‎Basic Functions)
Line 17: Line 17:
  
 
# '''SLEEP'''  - For connection to the mains supply.  
 
# '''SLEEP'''  - For connection to the mains supply.  
−
# '''NUMBER PAD'''  - For switching the power to the unit on and off
+
# '''NUMBERERICAL KEYS'''  - For switching the power to the unit on and off
−
# '''#''' - For connecting the unit to the network.
+
# '''#''' - Press and hold for 2 seconds for HELP information.
−
# '''*''' - For connection to Linn source products without ethernet ports.
+
# '''*''' - No function.
−
# '''NAVIGATION / SELECT''' - Used when reprogramming the unit.
+
# '''NAVIGATION / SELECT''' - Navigation keys.
−
# '''DS SOURCE SELECTION''' - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
+
# '''DS SOURCE SELECTION''' - For switching between "songcast", "playlist" and "radio" sources on your DS.
−
# '''INPUT SOURCE SELECTION''' - Line level analogue outputs for connection to a pre-ampLifier.
+
# '''INPUT SOURCE SELECTION''' - Direct source selection buttons, see below for default settings and how to change.
−
# '''TRANSPORT CONTROLS''' - Line level analogue outputs for connection to a pre-amplifier.
+
# '''TRANSPORT CONTROLS''' - Play, pause, skip forward, skip back.
−
# '''MUTE''' - Used when reprogramming the unit.
+
# '''MUTE''' - To mute / unmute volume.
−
# '''VOLUME + , -''' - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
+
# '''VOLUME + , -''' - Volume + , -.
−
# '''SOURCE + , -''' - Line level analogue outputs for connection to a pre-amplifier.
+
# '''SOURCE + , -''' - Source + , -.
−
# '''INFORMATION''' - Line level analogue outputs for connection to a pre-amplifier.
+
# '''INFORMATION''' ##Press and release - toggles different display modes
 +
##Press and hold scrolls title / artist / album information
  
 
<BR>
 
<BR>

Revision as of 15:30, 6 October 2011

Operation with Linn DS

The following functionality is available on all Linn DS devices with Infra-Red (IR) control. If IR is not currently enabled on the Linn DS then this can be done via Linn Konfig.

To Enable IR

  • Open Linn Konfig
  • Select the Linn DS
  • Select the Configuration tab
  • Set Handset Commands Accepted to All, Dvd or Cd depending on user requirement


Basic Functions

Remote.jpg


  1. SLEEP - For connection to the mains supply.
  2. NUMBERERICAL KEYS - For switching the power to the unit on and off
  3. # - Press and hold for 2 seconds for HELP information.
  4. * - No function.
  5. NAVIGATION / SELECT - Navigation keys.
  6. DS SOURCE SELECTION - For switching between "songcast", "playlist" and "radio" sources on your DS.
  7. INPUT SOURCE SELECTION - Direct source selection buttons, see below for default settings and how to change.
  8. TRANSPORT CONTROLS - Play, pause, skip forward, skip back.
  9. MUTE - To mute / unmute volume.
  10. VOLUME + , - - Volume + , -.
  11. SOURCE + , - - Source + , -.
  12. INFORMATION ##Press and release - toggles different display modes
    1. Press and hold scrolls title / artist / album information


Retrieved from "https://docs.linn.co.uk/wiki/index.php?title=REM_020&oldid=6621"